Anchorage in Concrete Construction / Edition 1

Anchorage in Concrete Construction / Edition 1

by Rolf Eligehausen, Rainer Mallee, John F. Silva
     
 

ISBN-10: 3433011435

ISBN-13: 9783433011430

Pub. Date: 05/28/2006

Publisher: Wiley

A comprehensive treatment of current fastening technology using inserts (anchor channels, headed stud), anchors (metal expansion anchor, undercut anchor, bonded anchor, concrete screw and plastic anchor) as well as power actuated fasteners in concrete. It describes in detail the fastening elements as well as their effects and load-bearing capacities in cracked and

…  See more details below

Overview

A comprehensive treatment of current fastening technology using inserts (anchor channels, headed stud), anchors (metal expansion anchor, undercut anchor, bonded anchor, concrete screw and plastic anchor) as well as power actuated fasteners in concrete. It describes in detail the fastening elements as well as their effects and load-bearing capacities in cracked and non-cracked concrete. It further focuses on corrosion behaviour, fire resistance and characteristics with earthquakes and shocks. It finishes off with the design of fastenings according to the European Technical Approval Guideline (ETAG 001), the Final Draft of the CEN Technical Specification 'Design of fastenings for use in concrete' and the American Standards ACI 318-05, Appendix D and ACI 349-01, Appendix B.

Product Details

ISBN-13:
9783433011430
Publisher:
Wiley
Publication date:
05/28/2006
Pages:
391
Product dimensions:
6.97(w) x 9.69(h) x 0.99(d)

Table of Contents

1 Introduction 1

1.1 A historical review 1

1.2 Requirements for fastenings 2

1.3 Nature and direction of actions 2

2 Fastening systems 5

2.1 General 5

2.2 Cast-in-place systems 5

2.3 Drilled-in systems 10

2.4 Direct installation 29

3 Principles 33

3.1 General 33

3.2 Behaviour of concrete in tension 34

3.3 Failure mechanisms of fastenings 37

3.4 Cracked concrete 51

3.5 Why anchors may use the tensile strength of concrete 54

3.6 Prestressing of anchors 55

3.7 Loads on anchors 58

4 Behaviour of headed studs, undercut anchors and metal expansion anchors in non-cracked and cracked concrete 65

4.1 Non-cracked concrete 65

4.2 Cracked concrete 142

5 Behaviour of cast-in anchor channels in non-cracked and cracked concrete 163

5.1 Non-cracked concrete 163

5.2 Cracked concrete 179

6 Behaviour of bonded anchors in non-cracked and cracked concrete 181

6.1 Non-cracked concrete 181

6.2 Cracked concrete 204

6.3 Bonded undercut anchors and bonded expansion anchors 208

7 Behaviour of plastic anchors in non-cracked and cracked concrete 211

7.1 Non-cracked concrete 211

7.2 Cracked concrete 220

8 Behaviour of power actuated fasteners in non-cracked and cracked concrete 223

8.1 Non-cracked concrete 223

8.2 Cracked concrete 225

9 Behaviour of screw anchors in non-cracked and cracked concrete 227

9.1 Installation 227

9.2 Non-cracked concrete 231

9.3 Cracked concrete 234

10 Behaviour of anchors under seismic loading 237

10.1 Anchor applications 237

10.2 Seismic actions 238

10.4 Behaviour of anchors under seismic conditions 240

11 Behaviour of anchors in fire 249

12 Corrosion of anchors 255

13 Influence of fastenings on the capacity of components in which they are installed 259

14 Design of fastenings 265

14.1 General 265

14.2 Verifying the suitability of an anchor system 266

14.3 Design of fastenings with post-installed metal expansion, undercut and bonded expansion anchors according to the EOTA Guideline 267

14.4 Design of fastenings according to the CEN Technical Specification 283

14.5 Design of fastenings with cast-in and post-installed metal anchors according to ACI 318-05 Appendix D 330

References 343

Subject Index 371

Read More

Customer Reviews

Average Review:

Write a Review

and post it to your social network

     

Most Helpful Customer Reviews

See all customer reviews >