Environmental Assessment of Products: Volume 1 Methodology, Tools and Case Studies in Product Development / Edition 1

by Henrik Wenzel, Michael Z. Hauschild, L. Alting

Overview

The aim of this book is to support industry in their effort to design environmentally friendly products. The book comprises a method and a manual for life cycle assessment of products and it includes examples of how industrial companies have used the method succesfully in the design of more environmentally friendly products. The method has been developed over a period of four years under the Danish EDIP programme (Environmental Design of Industrial Products) by a team representing the Technical University of Denmark, five Danish industrial companies, the Confederation of Danish Industries and the Dan­ ish Environmental Protection Agency. The method is coheherent and operational and it is well documented by a large variety of examples including five different complex electromechanical products. It guides the user through the inventory and assessment of environmental impacts of products and shows how various products and design solutions during product development can be compared. The method is supported by a base of data for the assessments of environmental impacts and is thus designed as a tool which will make it possible for the user to start on life cycle assessment at once. The book also guides the user through the identification of environmental improvement potentials in the product and the setting of environmental specifications with­ in the general concept of overall commercial optimization. The partnership between industry, authorities and university has been highly fruitful.

Product Details

ISBN-13:	9780412808005
Publisher:	Springer US
Publication date:	09/30/1997
Series:	Environmental Assessment of Products Methodology , #1
Edition description:	1997
Pages:	543
Product dimensions:	7.01(w) x 10.00(h) x 0.05(d)

Table of Contents

Preface. Introduction. Part I: Introduction to Environmental Assessment of Products. 1. The state of the environment. 2. Society's environmental focus. 3. Environmental assessment of products - what does it say? 4. Status of life cycle assessment. 5. Environmental assessment and product development. Part II: The Life Cycle Assessment Method. 6. The structure of the LCA method. 7. Goal definition. 8. Scope definition. 9. Inventory. 10. Impact assessment. 11. Uncertainty and sensitivity analysis. 12. The MECO principle. 13. Choices in the EDIP method. Part III: Environmental Tasks in Product Development. 14. Cooperation with the designer. 15. Environmental assessment of references. 16. Environmental diagnosis. 17. Environmental specification. 18. Environmental assessment of concepts. 19. Environmental assessment of details. Part IV: The Toolbox. 20. Procedure for goal definition. 21. Procedure for scope definition. 22. Procedure for inventory. 23. Procedure for impact assessment. 24. Procedure for sensitivity analysis. Part V: Case Histories. 25. Introduction to the case histories. 26. Gram: Refrigerators; A.-M. Mose, H. Wenzel, M. Hauschild. 27. Bang & Olufsen: Televisions; R. Nedermark, M. Wesnæs, H. Wenzel. 28. KEW Industri: High pressure cleaners; A. Sand, A. Sørensen, N. Caspersen. 29. Grundfos: Pumps; N. Thorup, N. Caspersen, E. Rasmussen.30. Danfoss: Electro-hydraulic activation units; K. Stentoft, H. Erichsen, M. Hauschild. References. Glossary. Variables and parameters. Abbreviations. Units. Index.

Editorial Reviews

‘Environmental improvement of products and services during the entire life cycle is an important challenge and and in the future. Danish experience shows that large improvement potentials can be identified when focusing on environmental aspects during the development of new products. The Danish Environmental Protection Agency supports the EDIP methods and tools as a very useful instrument for this purpose and encourages the use of them, both within companies and as a basis for dialogue between companies, environmental authorities and other stakeholders.'
Leo Larsen, Deputy Director-General, Danish Environmental Protection Agency
‘The EDIP books have been used with success in three courses at the Norwegian Institute of Sciences and Technology in Trondheim in 1996/97. First of all, the good structure of the text, both in theory and case studies, has proved to be well suited to teach LCA-application to product design. Second, the books may be used separately according to the need of individual course modules. We strongly recommend the use of the EDIP books for teaching purposes.'
Helge Brattebø, Professor, Norwegian University of Science and Technology, Trondheim
‘Grundfos's certified and EMAS-registered environmental management system also covers our R&D. To ensure that all new products are as environmentally friendly as possible, all products are subjected to a Life Cycle Assessment in accordance with the EDIP method. In the charting of our em,issions, the EDIP concept also exerted a decisive influence on our construction of an efficient and flexible calculation system which is easy to update and to extend in step with developments in production.'
Niels Due Jensen, Group Leader and President, Grundfos - Leaders in Pump Technology

From the Publisher