Evaluation of Polymer Construction Material and Water Trap Designs for Underground Coal Mine Seals

Evaluation of Polymer Construction Material and Water Trap Designs for Underground Coal Mine Seals

by Eric S. Weiss, William A. Slivensky, Mark J. Schultz, Clete R. Stephan
     
 

Strength characteristics and air leakage resistance of seals and designs of water traps used in underground coal mines were evaluated in a joint effort by the Pittsburgh Research Center and the Mine Safety and Health Administration. The efficacies of various seals in limiting air leakage from a sealed area following an explosion were tested at the Lake Lynn…  See more details below

Overview

Strength characteristics and air leakage resistance of seals and designs of water traps used in underground coal mines were evaluated in a joint effort by the Pittsburgh Research Center and the Mine Safety and Health Administration. The efficacies of various seals in limiting air leakage from a sealed area following an explosion were tested at the Lake Lynn Experimental Mine. Polymer seals composed of a mixture of polyisocyanate and polyol resins were used in a composite structural design in which they were placed between two dry stacked hollow core, concrete block walls. Seals constructed using 76, 46, and 31 centimeter (cm) thick polymer and stone aggregate cores survived an explosion pressure of 145 kilopascal (kPa) and maintained acceptable leakage resistance. Only the 46cm thick seal survived a pressure pulse of 269kPa. A seal 97cm thick with a density of 91 kilograms/cubic meter (kg/m3) constructed with polymer without aggregate did not survive the explosion, whereas a 51cm thick, 203kg/m3 polymer only seal successfully withstood the explosion pressure. Seals consisting of cellular concrete injected with polymer slurry using a two pour injection process were able to withstand the explosion pressure. Two seal designs using low density cementitious block were also found to be effective. Additional studies demonstrated that three commonly used water trap designs were ineffective under worst case conditions. Improvement was seen with the installation of an additional course of block around the water trough area on the active side of the seal and by lowering the trap opening through the seal.

Read More

Product Details

ISBN-13:
2940013661851
Publisher:
1001 Property Solutions LLC
Publication date:
11/05/2011
Sold by:
Barnes & Noble
Format:
NOOK Book
File size:
2 MB

Customer Reviews

Average Review:

Write a Review

and post it to your social network

     

Most Helpful Customer Reviews

See all customer reviews >