×

Uh-oh, it looks like your Internet Explorer is out of date.

For a better shopping experience, please upgrade now.

Feedstock Recycling and Pyrolysis of Waste Plastics / Edition 1
     

Feedstock Recycling and Pyrolysis of Waste Plastics / Edition 1

by John Scheirs, Walter Kaminsky
 

ISBN-10: 0470021527

ISBN-13: 9780470021521

Pub. Date: 05/26/2006

Publisher: Wiley

Pyrolysis is a recycling technique converting plastic waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. It allows the treatment of mixed, unwashed plastic wastes. For many years research has been carried out on thermally converting waste plastics into useful hydrocarbons liquids such as crude oil and diesel fuel.

Overview

Pyrolysis is a recycling technique converting plastic waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. It allows the treatment of mixed, unwashed plastic wastes. For many years research has been carried out on thermally converting waste plastics into useful hydrocarbons liquids such as crude oil and diesel fuel. Recently the technology has matured to the point where commercial plants are now available. Pyrolysis recycling of mixed waste plastics into generator and transportation fuels is seen as the answer for recovering value from unwashed, mixed plastics and achieving their desired diversion from landfill.

This book provides an overview of the science and technology of pyrolysis of waste plastics. It describes the types of plastics that are suitable for pyrolysis recycling, the mechanism of pyrolytic degradation of various plastics, characterization of the pyrolysis products and details of commercially mature pyrolysis technologies. This book also covers co-pyrolysis technology, including: waste plastic/waste oil, waste plastics/coal, and waste plastics/rubber.

Product Details

ISBN-13:
9780470021521
Publisher:
Wiley
Publication date:
05/26/2006
Series:
Wiley Series in Polymer Science Series
Pages:
816
Product dimensions:
6.40(w) x 9.70(h) x 2.10(d)

Related Subjects

Table of Contents

Contributors.

Series Preface.

Preface.

About the Editors.

I INTRODUCTION.

1 Introduction to Feedstock Recycling of Plastics (A. Buekens).

II CATALYTIC CRACKING.

2 Acid-Catalyzed Cracking of Polyolefins: Primary Reaction Mechanisms (Robert L. White).

3 Catalytic Upgrading of Plastic Wastes (J. Aguado, D. P. Serrano and J. M. Escola).

4 Thermal and Catalytic Conversion of Polyolefins (Jerzy Walendziewski).

5 Thermal and Catalytic Degradation of Waste HDPE (Kyong-Hwan Lee).

6 Development of a Process for the Continuous Conversion of Waste Plastics Mixtures to Fuel (Takao Masuda and Teruoki Tago).

7 Catalytic Degradation of Plastic Waste to Fuel over Microporous Materials (George Manos).

8 Liquefaction of Municipal Waste Plastics over Acidic and Nonacidic Catalysts (Jale Yanik and Tamer Karayildirim).

9 Kinetic Model of the Chemical and Catalytic Recycling of Waste Polyethylene into Fuels (Norbert Miskolczi).

III QUALITY OF FUELS.

10 Production of Gaseous and Liquid Fuels by Pyrolysis and Gasification of Plastics: Technological Approach (C. Gisèle Jung and André Fontana).

11 Yield and Composition of Gases and Oils/Waxes from the Feedstock Recycling of Waste Plastic (Paul T. Williams).

12 Composition of Liquid Fuels Derived from the Pyrolysis of Plastics (Marianne Blazsó).

13 Production of Premium Oil Products from Waste Plastic by Pyrolysis and Hydroprocessing (S.J. Miller, N. Shah and G.P. Huffman).

14 The Conversion of Waste Plastics/Petroleum Residue Mixtures to Transportation Fuels (Mohammad Farhat Ali and Mohammad Nahid Siddiqui).

IV REACTOR TYPES.

15 Overview of Commercial Pyrolysis Processes for Waste Plastics (John Scheirs).

16 Fluidized Bed Pyrolysis of Plastic Wastes (Umberto Arena and Maria Laura Mastellone).

17 The Hamburg Fluidized-bed Pyrolysis Process to Recycle Polymer Wastes and Tires (Walter Kaminsky).

18 Liquefaction of PVC Mixed Plastics (Thallada Bhaskar and Yusaku Sakata).

19 Liquid Fuel from Plastic Wastes Using Extrusion–Rotary Kiln Reactors (Sam Behzadi and Mohammed Farid).

20 Rotary Kiln Pyrolysis of Polymers Containing Heteroatoms (Andreas Hornung and Helmut Seifert).

21 Microwave Pyrolysis of Plastic Wastes (C. Ludlow-Palafox and H.A. Chase).

22 Continuous Thermal Process for Cracking Polyolefin Wastes to Produce Hydrocarbons (Jean Dispons).

23 Waste Plastic Pyrolysis in Free-Fall Reactors (Ali Y. Bilgesü, M. Çetin Koçak, and Ali Karaduman).

V MONOMER RECOVERY.

24 Monomer Recovery of Plastic Waste in a Fluidized Bed Process (Walter Kaminsky).

25 Feedstock Recycling of PET (Toshiaki Yoshioka and Guido Grause).

VI ASIAN DEVELOPMENTS.

26 The Liquefaction of Plastic Containers and Packaging in Japan (A. Okuwaki, T. Yoshioka, M. Asai, H. Tachibana, K. Wakai, K. Tada).

27 Process and Equipment for Conversions of Waste Plastics into Fuels (Alka Zadgaonkar).

28 Converting Waste Plastics into Liquid Fuel by Pyrolysis: Developments in China (Yuan Xingzhong).

Index.

Customer Reviews

Average Review:

Post to your social network

     

Most Helpful Customer Reviews

See all customer reviews