Fundamentals of Creep in Metals and Alloys by Michael E. Kassner | Hardcover | Barnes & Noble
Fundamentals of Creep in Metals and Alloys / Edition 2

Fundamentals of Creep in Metals and Alloys / Edition 2

4.2 4
by Michael E. Kassner, Maria-Teresa Perez-Prado
     
 

ISBN-10: 0080475612

ISBN-13: 9780080475615

Pub. Date: 02/03/2009

Publisher: Elsevier Science

Creep refers to the slow, permanent deformation of materials under external loads, or stresses. It explains the creep strength or resistance to this extension. This book is for experts in the field of strength of metals, alloys and ceramics. It explains creep behavior at the atomic or “dislocation defect” level. This book has many illustrations and many

Overview

Creep refers to the slow, permanent deformation of materials under external loads, or stresses. It explains the creep strength or resistance to this extension. This book is for experts in the field of strength of metals, alloys and ceramics. It explains creep behavior at the atomic or “dislocation defect” level. This book has many illustrations and many references. The figure formats are uniform and consistently labeled for increased readability. This book is the second edition that updates and improves the earlier edition.

• Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials.

• Transmission electron micrographs provide direct insight into the basic microstructure of metals deforming at high temperatures.

• Extensive literature review of about 1000 references provides an excellent overview of the field.

Product Details

ISBN-13:
9780080475615
Publisher:
Elsevier Science
Publication date:
02/03/2009
Edition description:
New Edition
Pages:
320
Product dimensions:
6.30(w) x 9.50(h) x 0.80(d)

Table of Contents

1.0 Introduction
A. Description of Creep
B. Objectives
2.0 Five-Power-Law Creep
A. Macroscopic Relationships
B. Microstructural Observations
C. Rate-Controlling Mechanisms
D. Other Effects on Five-Power-Law Creep
3.0 Diffusional Creep
4.0 Harper Dorn Creep
A. The Size Effect
B. The Effect of Impurities
5.0 Three-Power-Law Viscous Glide Creep
6.0. Superplasticity
A. Introduction
B. Characteristics of Fine Structure Superplasticity
C. Microstructure of Fine Structure Superplastic Materials
D. Texture Studies in Superplasticity
E. High Strain Rate Superplasticity (HSRS)
F. Superplasticity in Nano and Submicrocrystalline Materials
7.0 Recrystallization
A. Introduction
B. Discontinuous Dynamic Recrystallization (DRX)
C. Geometric Dynamic Recrystallization
D. Particle Stimulated Nucleation (PSN)
E. Continuous Reactions
8.0 Creep Behavior of Particle Strengthened Alloys
A. Introduction and Theory
B. Small Volume Fraction Particles that are
Coherent and Incoherent with Small Aspect Ratios
9.0 Creep of Intermetallics
A. Introduction
B. Titanium Aluminides
C. Iron Aluminides
D. Nickel Aluminides
10.0 Creep Fracture
A. Background
B. Cavity Nucleation
C. Growth

Customer Reviews

Average Review:

Write a Review

and post it to your social network

     

Most Helpful Customer Reviews

See all customer reviews >

Fundamentals of Creep in Metals and Alloys 5 out of 5 based on 0 ratings. 1 reviews.
Anonymous More than 1 year ago