Industrial Maintenance Mechanic Level 2 Trainee Guide, Paperback / Edition 3by NCCER
Pub. Date: 02/21/2008
This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Basic Layout, Introduction to Piping Components, Copper and Plastic Piping Practices, Introduction to Ferrous Metal Piping Practices, Identify, Install, and Maintain Valves,
This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Basic Layout, Introduction to Piping Components, Copper and Plastic Piping Practices, Introduction to Ferrous Metal Piping Practices, Identify, Install, and Maintain Valves, Hydrostatic and Pneumatic Testing , Introduction to Bearings, Low-Pressure Steam Systems, High-Pressure Steam Systems and Auxiliaries, Distillation Towers and Vessels, Heaters, Furnaces, Heat Exchangers, Cooling Towers, and Fin Fans and Introduction to Tube Work.
Instructors: Product supplements may be ordered directly through OASIS at http://oasis.pearson.com. For more information contact your Pearson NCCER/Contren Sales Specialist at http://nccer.pearsonconstructionbooks.com/store/sales.aspx.
- Annotated Instructor's Guide Paperback 0-13-614393-8
- Computerized Testing Software 0-13-614781-X
- Transparency Masters 0-13-614797-6
- PowerPoint® Presentation Slides 0-13-608644-6
Table of Contents(Total Level Hours: 160)
32201-07 Basic Layout (20 Hours) NEW!
Discusses the tools used in layout. Explains how to lay out baselines using the arc method and 3-4-5 method.
32202-07 Introduction to Piping Components (5 Hours) NEW!
Introduces chemical, compressed air, fuel oil, steam, and water systems. Explains how to identify piping systems according to color codes.
32203-07 Copper and Plastic Piping Practices (5 Hours)
Covers the selection, preparation, joining, and support of copper, plastic piping, and fittings.
32204-07 Introduction to Ferrous Metal Piping Practices (5 Hours)
Covers various types of iron and steel pipe and fittings and provides step-by-step instructions for cutting, threading, and joining ferrous piping.
32205-07 Identify, Install, and Maintain Valves (10 Hours)
Explains how to remove and install threaded and flanged valves, how to replace valve stem O-ring and bonnet gaskets, and how to repack a valve stuffing box. Also discusses the purpose of valve packing.
32206-07 Hydrostatic and Pneumatic Testing (10 Hours) NEW!
Describes non-destructive and pressure testing of systems and equipment.
32207-07 Introduction to Bearings (15 Hours)
Introduces plain, ball, roller, thrust, guide, flanged, pillow block, and takeup bearings. Discusses bearing materials and designations.
32208-07 Low-Pressure Steam Systems (10 Hours)
Introduces the components and functions of basic steam systems, including boilers, steam traps, and blowdown recovery systems.
32209-07 High-Pressure Steam Systems and Auxiliaries (20 Hours) NEW!
Explains the functioning of high-pressure steam systems used in industry.
32210-07 Distillation Towers and Vessels (20 Hours) NEW!
Introduces the various types and functioning of distillation towers and vessels, including recovery vessels and condensate processing.
32211-07 Heaters, Furnaces, Heat Exchangers, Cooling Towers, and Fin Fans (30 Hours) NEW!
Introduces the trainee to the equipment used to transfer and remove heat from systems in process.
32212-07 Introduction to Tube Work (10 Hours) NEW!
Covers the basics of working with heat exchanger and furnace tubing and tube sheets.
and post it to your social network
Most Helpful Customer Reviews
See all customer reviews >