The Innovator's Dilemma: When New Technologies Cause Great Firms to Failby Clayton M. Christensen
Harvard professor Clayton M. Christensen demonstrates in the most revolutionary business book in years why outstanding companies that did everything right-were in tune with the competition, listened to customers, and invested aggressively in new technologies still lost their market leadership when confronted with
- LendMe LendMe™ Learn More
- Editorial Reviews
- Product Details
- Related Subjects
- Read an Excerpt
- What People Are Saying
- Meet the author
How Great Firms Fail By Doing Everything Right
Harvard professor Clayton M. Christensen demonstrates in the most revolutionary business book in years why outstanding companies that did everything right-were in tune with the competition, listened to customers, and invested aggressively in new technologies still lost their market leadership when confronted with disruptive changes in technology and market structure ... and he tells how to avoid a similar fate as business races online into the twenty-first century. The Innovator's Dilemma eloquently demonstrates a shattering paradox: that the best of conventional good business practices can ultimately weaken a great firm. There is a certain type of technological innovation that Christensen labels disruptive technology, which mainstream customers initially reject. Following these customers causes well-managed firms to allow strategic innovations to languish. The solution? Create a subsidiary entirely focused on the emerging market, one that is free to be visionary while courting an unorthodox customer base and staying poised to catch the next great wave of industry growth. Sharp, cogent, and provocative, The Innovator's Dilemma is one of the most talked about business books of our time-and something that none of today's executives will dare to be without.
Enter to win a year's subscription to Christensen's online journal and management learning center, Innosight!.com
A Wall Street Journal and Businessweek bestseller. Named by Fast Company as one of the most influential leadership books in its Leadership Hall of Fame.
“His book, one of the most significant business books of the past 50 years, became a mammoth bestseller, and its title entered the language.” Fortune magazine
“Christensen’s The Innovator’s Dilemma is the foundational read for managing disruptive innovation.” Steve Blank, Silicon Valley serial-entrepreneur and academician, as seen in strategy+business magazine
“This is an important read, even if you’re at the very early stages of growing a startup.” Drew Houston, CEO, Dropbox
Praise for The Innovator’s Dilemma and Clayton M. Christensen:
“[Clayton Christensen is] one of the most influential business theorists of the last fifty years.”
The Financial Times
“The Innovator’s Dilemma achieves a rare feat: It is at once a satisfying intellectual solution to a long-standing business puzzle and a practical guide for executives and investors.”
“. . . Required reading in Silicon Valley, where it has been championed by the likes of Steve Jobs, George Gilder, and Andy Grove.”
The Huffington Post
“A seminal book.”
“A holy book for entrepreneurs in Silicon Valley . . .”
“The notion of ‘disruptive technology’ is one of the timeliest ideas of the Internet age. Coined by Harvard Business School professor Clayton Christensen, it’s at the heart of his influential book The Innovator’s Dilemma.”
- Harvard Business Review Press
- Publication date:
- Sold by:
- Barnes & Noble
- NOOK Book
- Sales rank:
- File size:
- 4 MB
Read an Excerpt
How Can Great Firms Fail?
Insights from the Hard Disk
When I began my search for an answer to the puzzle of why the best firms can fail, a friend offered some sage advice. "Those who study genetics avoid studying humans," he noted. "Because new generations come along only every thirty years or so, it takes a long time to understand the cause and effect of any changes. Instead, they study fruit flies, because they are conceived, born, mature, and die all within a single day. If you want to understand why something happens in business, study the disk drive industry. Those companies are the closest things to fruit flies that the business world will ever see."
Indeed, nowhere in the history of business has there been an industry like disk drives, where changes in technology, market structure, global scope, and vertical integration have been so pervasive, rapid, and unrelenting. While this pace and complexity might be a nightmare for managers, my friend was right about its being fertile ground for research. Few industries offer researchers the same opportunities for developing theories about how different types of change cause certain types of firms to succeed or fail or for testing those theories as the industry repeats its cycles of change.
This chapter summarizes the history of the disk drive industry in all its complexity. Some readers will be interested in it for the sake of history itself. But the value of understanding this history is that out of its complexity emerge a few stunningly simple and consistent factors that have repeatedly determined the success and failure of the industry's best firms. Simply put, when the best firms succeeded, they did so because they listened responsively to their customers and invested aggressively in the technology, products, and manufacturing capabilities that satisfied their customers' next-generation needs. But, paradoxically, when the best firms subsequently failed, it was for the same reasons--they listened responsively to their customers and invested aggressively in the technology, products, and manufacturing capabilities that satisfied their customers' next-generation needs. This is one of the innovator's dilemmas: Blindly following the maxim that good managers should keep close to their customers can sometimes be a fatal mistake.
The history of the disk drive industry provides a framework for understanding when "keeping close to your customers" is good advice--and when it is not. The robustness of this framework could only be explored by researching the industry's history in careful detail. Some of that detail is recounted here, and elsewhere in this book, in the hope that readers who are immersed in the detail of their own industries will be better able to recognize how similar patterns have affected their own fortunes and those of their competitors.
HOW DISK DRIVES WORK
Disk drives write and read information that computers use. They comprise read-write heads mounted at the end of an arm that swings over the surface of a rotating disk in much the same way that a phonograph needle and arm reach over a record; aluminum or glass disks coated with magnetic material; at least two electric motors, a spin motor that drives the rotation of the disks and an actuator motor that moves the head to the desired position over the disk; and a variety of electronic circuits that control the drive's operation and its interface with the computer. See Figure 1.1 for an illustration of a typical disk drive.
The read-write head is a tiny electromagnet whose polarity changes whenever the direction of the electrical current running through it changes. Because opposite magnetic poles attract, when the polarity of the head becomes positive, the polarity of the area on the disk beneath the head switches to negative, and vice versa. By rapidly changing the direction of current flowing through the head's electromagnet as the disk spins beneath the head, a sequence of positively and negatively oriented magnetic domains are created in concentric tracks on the disk's surface. Disk drives can use the positive and negative domains on the disk as a binary numeric system--1 and 0--to "write" information onto disks. Drives read information from disks in essentially the opposite process: Changes in the magnetic flux fields on the disk surface induce changes in the micro current flowing through the head.
EMERGENCE OF THE EARLIEST DISK DRIVES
A team of researchers at IBM's San Jose research laboratories developed the first disk drive between 1952 and 1956. Named RAMAC (for Random Access Method for Accounting and Control), this drive was the size of a large refrigerator, incorporated fifty twenty-four-inch disks, and could store 5 megabytes (MB) of information (see Figure 1.2). Most of the fundamental architectural concepts and component technologies that defined today's dominant disk drive design were also developed at IBM. These include its removable packs of rigid disks (introduced in 1961); the floppy disk drive (1971); and the Winchester architecture (1973). All had a powerful, defining influence on the way engineers in the rest of the industry defined what disk drives were and what they could do.
As IBM produced drives to meet its own needs, an independent disk drive industry emerged serving two distinct markets. A few firms developed the plug-compatible market (PCM) in the 1960s, selling souped-up copies of IBM drives directly to IBM customers at discount prices. Although most of IBM's competitors in computers (for example, Control Data, Burroughs, and Univac) were integrated vertically into the manufacture of their own disk drives, the emergence in the 1970s of smaller, nonintegrated computer makers such as Nixdorf, Wang, and Prime spawned an original equipment market (OEM) for disk drives as well. By 1976 about $1 billion worth of disk drives were produced, of which captive production accounted for 50 percent and PCM and OEM for about 25 percent each.
The next dozen years unfolded a remarkable story of rapid growth, market turbulence, and technology-driven performance improvements. The value of drives produced rose to about $18 billion by 1995. By the mid-1980s the PCM market had become insignificant, while OEM output grew to represent about three-fourths of world production. Of the seventeen firms populating the industry in 1976--all of which were relatively large, diversified corporations such as Diablo, Ampex, Memorex, EMM, and Control Data--all except IBM's disk drive operation had failed or had been acquired by 1995. During this period an additional 129 firms entered the industry, and 109 of those also failed. Aside from IBM, Fujitsu, Hitachi, and NEC, all of the producers remaining by 1996 had entered the industry as start-ups after 1976.
Some have attributed the high mortality rate among the integrated firms that created the industry to its nearly unfathomable pace of technological change. Indeed, the pace of change has been breathtaking. The number of megabits (Mb) of information that the industry's engineers have been able to pack into a square inch of disk surface has increased by 35 percent per year, on average, from 50 Kb in 1967 to 1.7 Mb in 1973, 12 Mb in 1981, and 1100 Mb by 1995. The physical size of the drives was reduced at a similar pace: The smallest available 20 MB drive shrank from 800 cubic inches ([in..sup.3]) in 1978 to 1.4 [in..sup.3] by 1993--a 35 percent annual rate of reduction.
Figure 1.3 shows that the slope of the industry's experience curve (which correlates the cumulative number of terabytes (one thousand gigabytes) of disk storage capacity shipped in the industry's history to the constant-dollar price per megabyte of memory) was 53 percent--meaning that with each doubling of cumulative terabytes shipped, cost per megabyte fell to 53 percent of its former level. This is a much steeper rate of price decline than the 70 percent slope observed in the markets for most other microelectronics products. The price per megabyte has declined at about 5 percent per quarter for more than twenty years.
THE IMPACT OF TECHNOLOGICAL CHANGE
My investigation into why leading firms found it so difficult to stay atop the disk drive industry led me to develop the "technology mudslide hypothesis": Coping with the relentless onslaught of technology change was akin to trying to climb a mudslide raging down a hill. You have to scramble with everything you've got to stay on top of it, and if you ever once stop to catch your breath, you get buried.
To test this hypothesis, I assembled and analyzed a database consisting of the technical and performance specifications of every model of disk drive introduced by every company in the world disk drive industry for each of the years between 1975 and 1994. This database enabled me to identify the firms that led in introducing each new technology; to trace how new technologies were diffused through the industry over time; to see which firms led and which lagged; and to measure the impact each technological innovation had on capacity, speed, and other parameters of disk drive performance. By carefully reconstructing the history of each technological change in the industry, the changes that catapulted entrants to success or that precipitated the failure of established leaders could be identified.
This study led me to a very different view of technology change than the work of prior scholars on this question had led me to expect. Essentially, it revealed that neither the pace nor the difficulty of technological change lay at the root of the leading firms' failures. The technology mudslide hypothesis was wrong.
The manufacturers of most products have established a trajectory of performance improvement over time. Intel, for example, pushed the speed of its microprocessors ahead by about 20 percent per year, from its 8 megahertz (MHz) 8088 processor in 1979 to its 133 MHz Pentium chip in 1994. Eli Lilly and Company improved the purity of its insulin from 50,000 impure parts per million (ppm) in 1925 to 10 ppm in 1980, a 14 percent annual rate of improvement. When a measurable trajectory of improvement has been established, determining whether a new technology is likely to improve a product's performance relative to earlier products is an unambiguous question.
But in other cases, the impact of technological change is quite different. For instance, is a notebook computer better than a mainframe? This is an ambiguous question because the notebook computer established a completely new performance trajectory, with a definition of performance that differs substantially from the way mainframe performance is measured. Notebooks, as a consequence, are generally sold for very different uses.
This study of technological change over the history of the disk drive industry revealed two types of technology change, each with very different effects on the industry's leaders. Technologies of the first sort sustained the industry's rate of improvement in product performance (total capacity and recording density were the two most common measures) and ranged in difficulty from incremental to radical. The industry's dominant firms always led in developing and adopting these technologies. By contrast, innovations of the second sort disrupted or redefined performance trajectories--and consistently resulted in the failure of the industry's leading firms.
The remainder of this chapter illustrates the distinction between sustaining and disruptive technologies by describing prominent examples of each and summarizing the role these played in the industry's development. This discussion focuses on differences in how established firms came to lead or lag in developing and adopting new technologies, compared with entrant firms. To arrive at these examples, each new technology in the industry was examined. In analyzing which firms led and lagged at each of these points of change, I defined established firms to be those that had been established in the industry prior to the advent of the technology in question, practicing the prior technology. I defined entrant firms as those that were new to the industry at that point of technology change. Hence, a given firm would be considered an entrant at one specific point in the industry's history, for example, at the emergence of the 8-inch drive. Yet the same firm would be considered an established firm when technologies that emerged subsequent to the firm's entry were studied.
SUSTAINING TECHNOLOGICAL CHANGES
In the history of the disk drive industry, most technology changes have sustained or reinforced established trajectories of product performance improvement. Figure 1.4, which compares the average recording density of drives that employed successive generations of head and disk technologies, maps an example of this. The first curve plots the density of drives that used conventional particulate oxide disk technology and ferrite head technology; the second charts the average density of drives that used new-technology thin-film heads and disks; the third marks the improvements in density achievable with the latest head technology, magneto-resistive heads.
The way such new technologies as these emerge to surpass the performance of the old resembles a series of intersecting technology S-curves. Movement along a given S-curve is generally the result of incremental improvements within an existing technological approach, whereas jumping onto the next technology curve implies adopting a radically new technology. In the cases measured in Figure 1.4, incremental advances, such as grinding the ferrite heads to finer, more precise dimensions and using smaller and more finely dispersed oxide particles on the disk's surface, led to the improvements in density from 1 to 20 megabits per square inch (Mbpsi) between 1976 and 1989. As S-curve theory would predict, the improvement in recording density obtainable with ferrite/ oxide technology began to level off toward the end of the period, suggesting a maturing technology. The thin-film head and disk technologies' effect on the industry sustained performance improvement at its historical rate. Thin-film heads were barely established in the early 1990s, when even more advanced magneto-resistive head technology emerged. The impact of magneto-resistive technology sustained, or even accelerated, the rate of performance improvement.
Figure 1.5 describes a sustaining technological change of a very different character: an innovation in product architecture, in which the 14-inch Winchester drive is substituted for removable disk packs, which had been the dominant design between 1962 and 1978. Just as in the thin-film for ferrite/oxide substitution, the impact of Winchester technology sustained the historically established rate of performance improvement. Similar graphs could be constructed for most other technological innovations in the industry, such as embedded servo systems, RLL and PRML recording codes, higher RPM motors, and embedded interfaces. Some of these were straightforward technology improvements; others were radical departures. But all had a similar impact on the industry: They helped manufacturers to sustain the rate of historical performance improvement that their customers had come to expect.
In literally every case of sustaining technology change in the disk drive industry, established firms led in development and commercialization. The emergence of new disk and head technologies illustrates this.
In the 1970s, some manufacturers sensed that they were reaching the limit on the number of bits of information they could pack onto oxide disks. In response, disk drive manufacturers began studying ways of applying super-thin films of magnetic metal on aluminum to sustain the historical rate of improvements in recording density. The use of thin-film coatings was then highly developed in the integrated circuit industry, but its application to magnetic disks still presented substantial challenges. Experts estimate that the pioneers of thin-film disk technology--IBM, Control Data, Digital Equipment, Storage Technology, and Ampex--each took more than eight years and spent more than $50 million in that effort. Between 1984 and 1986, about two-thirds of the producers active in 1984 introduced drives with thin-film disks. The overwhelming majority of these were established industry incumbents. Only a few entrant firms attempted to use thin-film disks in their initial products, and most of those folded shortly after entry.
The same pattern was apparent in the emergence of thin-film heads. Manufacturers of ferrite heads saw as early as 1965 the approaching limit to improvements in this technology; by 1981 many believed that the limits of precision would soon be reached. Researchers turned to thin-film technology, produced by sputtering thin films of metal on the recording head and then using photolithography to etch much finer electromagnets than could be attained with ferrite technology. Again, this proved extraordinarily difficult. Burroughs in 1976, IBM in 1979, and other established firms first successfully incorporated thin-film heads in disk drives. In the period between 1982 and 1986, during which some sixty firms entered the rigid disk drive industry, only four (all commercial failures) attempted to do so using thin-film heads in their initial products as a source of performance advantage. All other entrant firms--even aggressively performance-oriented firms such as Maxtor and Conner Peripherals--found it preferable to learn their way using conventional ferrite heads first, before tackling thin-film technology.
As was the case with thin-film disks, the introduction of thin-film heads entailed the sort of sustained investment that only established firms could handle. IBM and its rivals each spent more than $100 million developing thin-film heads. The pattern was repeated in the next-generation magneto--resistive head technology: The industry's largest firms--IBM, Seagate, and Quantum--led the race.
The established firms were the leading innovators not just in developing risky, complex, and expensive component technologies such as thin-film heads and disks, but in literally every other one of the sustaining innovations in the industry's history. Even in relatively simple innovations, such as RLL recording codes (which took the industry from double- to triple-density disks), established firms were the successful pioneers, and entrant firms were the technology followers. This was also true for those architectural innovations--for example, 14-inch and 2.5-inch Winchester drives--whose impact was to sustain established improvement trajectories. Established firms beat out the entrants.
Figure 1.6 summarizes this pattern of technology leadership among established and entrant firms offering products based on new sustaining technologies during the years when those technologies were emerging. The pattern is stunningly consistent. Whether the technology was radical or incremental, expensive or cheap, software or hardware, component or architecture, competence-enhancing or competence-destroying, the pattern was the same. When faced with sustaining technology change that gave existing customers something more and better in what they wanted, the leading practitioners of the prior technology led the industry in the development and adoption of the new. Clearly, the leaders in this industry did not fail because they became passive, arrogant, or risk-averse or because they couldn't keep up with the stunning rate of technological change. My technology mudslide hypothesis wasn't correct.
FAILURE IN THE FACE OF DISRUPTIVE
Most technological change in the disk drive industry has consisted of sustaining innovations of the sort described above. In contrast, there have been only a few of the other sort of technological change, called disruptive technologies. These were the changes that toppled the industry's leaders.
The most important disruptive technologies were the architectural innovations that shrunk the size of the drives--from 14-inch diameter disks to diameters of 8, 5.25, and 3.5-inches and then from 2.5 to 1.8 inches. Table 1.1 illustrates the ways these innovations were disruptive. Based on 1981 data, it compares the attributes of a typical 5.25-inch drive, a new architecture that had been in the market for less than a year, with those of a typical 8-inch drive, which at that time was the standard drive used by minicomputer manufacturers. Along the dimensions of performance important to established minicomputer manufacturers--capacity, cost per megabyte, and access time--the 8-inch product was vastly superior. The 5.25-inch architecture did not address the perceived needs of minicomputer manufacturers at that time. On the other hand, the 5.25-inch drive had features that appealed to the desktop personal computer market segment just emerging in the period between 1980 and 1982. It was small and lightweight, and, priced at around $2,000, it could be incorporated into desktop machines economically.
Generally disruptive innovations were technologically straightforward, consisting of off-the-shelf components put together in a product architecture that was often simpler than prior approaches. They offered less of what customers in established markets wanted and so could rarely be initially employed there. They offered a different package of attributes valued only in emerging markets remote from, and unimportant to, the mainstream.
The trajectory map in Figure 1.7 shows how this series of simple but disruptive technologies proved to be the undoing of some very aggressive, astutely managed disk drive companies. Until the mid-1970s, 14-inch drives with removable packs of disks accounted for nearly all disk drive sales. The 14-inch Winchester architecture then emerged to sustain the trajectory of recording density improvement. Nearly all of these drives (removable disks and Winchesters) were sold to mainframe computer manufacturers, and the same companies that led the market in disk pack drives led the industry's transition to the Winchester technology.
Table 1.1 A Disruptive Technology Change: The 5.25-inch Winchester Disk Drive (1981) 8-Inch Drives 5.25-Inch Drives Attribute (Minicomputer Market) (Desktop Computer Market) Capacity (megabytes) 60 10 Physical volume (cubic inches) 566 150 Weight (pounds) 21 6 Access time (milliseconds) 30 160 Cost per megabyte $50 $200 Unit cost $3000 $2000 Source: Data are from various issues of Disk/Trend Report.
The trajectory map shows that the hard disk capacity provided in the median priced, typically configured mainframe computer system in 1974 was about 130 MB per computer. This increased at a 15 percent annual rate over the next fifteen years--a trajectory representing the disk capacity demanded by the typical users of new mainframe computers. At the same time, the capacity of the average 14-inch drive introduced for sale each year increased at a faster, 22 percent rate, reaching beyond the mainframe market to the large scientific and supercomputer markets.
Between 1978 and 1980, several entrant firms--Shugart Associates, Micropolis, Priam, and Quantum--developed smaller 8-inch drives with 10, 20, 30, and 40 MB capacity. These drives were of no interest to mainframe computer manufacturers, which at that time were demanding drives with 300 to 400 MB capacity. These 8-inch entrants therefore sold their disruptive drives into a new application--minicomputers. The customers--Wang, DEC, Data General, Prime, and Hewlett-Packard--did not manufacture mainframes, and their customers often used software substantially different from that used in mainframes. These firms hitherto had been unable to offer disk drives in their small, desk-side minicomputers because 14-inch models were too big and expensive. Although initially the cost per megabyte of capacity of 8-inch drives was higher than that of 14-inch drives, these new customers were willing to pay a premium for other attributes that were important to them--especially smaller size. Smallness had little value to mainframe users.
Once the use of 8-inch drives became established in minicomputers, the hard disk capacity shipped with the median-priced minicomputer grew about 25 percent per year: a trajectory determined by the ways in which minicomputer owners learned to use their machines. At the same time, however, the 8-inch drive makers found that, by aggressively adopting sustaining innovations, they could increase the capacity of their products at a rate of more than 40 percent per year--nearly double the rate of increase demanded by their original "home" minicomputer market. In consequence, by the mid-1980s, 8-inch drive makers were able to provide the capacities required for lower-end mainframe computers. Unit volumes had grown significantly so that the cost per megabyte of 8-inch drives had declined below that of 14-inch drives, and other advantages became apparent: For example, the same percentage mechanical vibration in an 8-inch drive, as opposed to a 14-inch drive, caused much less variance in the absolute position of the head over the disk. Within a three-to-four-year period, therefore, 8-inch drives began to invade the market above them, substituting for 14-inch drives in the lower-end mainframe computer market.
As the 8-inch products penetrated the mainframe market, the established manufacturers of 14-inch drives began to fail. Two-thirds of them never introduced an 8-inch model. The one-third that introduced 8-inch models did so about two years behind the 8-inch entrant manufacturers. Ultimately, every 14-inch drive maker was driven from the industry.
The 14-inch drive makers were not toppled by the 8-inch entrants because of technology. The 8-inch products generally incorporated standard off-the-shelf components, and when those 14-inch drive makers that did introduce 8-inch models got around to doing so, their products were very performance-competitive in capacity, areal density, access time, and price per megabyte. The 8-inch models introduced by the established firms in 1981 were nearly identical in performance to the average of those introduced that year by the entrant firms. In addition, the rates of improvement in key attributes (measured between 1979 and 1983) were stunningly similar between established and entrant firms.
Held Captive by Their Customers
Why were the leading drive makers unable to launch 8-inch drives until it was too late? Clearly, they were technologically capable of producing these drives. Their failure resulted from delay in making the strategic commitment to enter the emerging market in which the 8-inch drives initially could be sold. Interviews with marketing and engineering executives close to these companies suggest that the established 14-inch drive manufacturers were held captive by customers. Mainframe computer manufacturers did not need an 8-inch drive. In fact, they explicitly did not want it: they wanted drives with increased capacity at a lower cost per megabyte. The 14-inch drive manufacturers were listening and responding to their established customers. And their customers--in a way that was not apparent to either the disk drive manufacturers or their computer-making customers--were pulling them along a trajectory of 22 percent capacity growth in a 14-inch platform that would ultimately prove fatal.
Figure 1.7 maps the disparate trajectories of performance improvement demanded in the computer product segments that emerged later, compared to the capacity that changes in component technology and refinements in system design made available within each successive architecture. The solid lines emanating from points A, B, C, D, and E measure the disk drive capacity provided with the median-priced computer in each category, while the dotted lines from the same points measure the average capacity of all disk drives introduced for sale in each architecture, for each year. These transitions are briefly described below.
The Advent of the 5.25-inch Drive
In 1980, Seagate Technology introduced 5.25-inch disk drives. Their capacities of 5 and 10 MB were of no interest to minicomputer manufacturers, who were demanding drives of 40 and 60 MB from their suppliers. Seagate and other firms that entered with 5.25-inch drives in the period 1980 to 1983 (for example, Miniscribe, Computer Memories, and International Memories) had to pioneer new applications for their products and turned primarily to desktop personal computer makers. By 1990, the use of hard drives in desktop computers was an obvious application for magnetic recording. It was not at all clear in 1980, however, when the market was just emerging, that many people could ever afford or use a hard drive on the desktop. The early 5.25-inch drive makers found this application (one might even say that they enabled it) by trial and error, selling drives to whomever would buy them.
Once the use of hard drives was established in desktop PCs, the disk capacity shipped with the median-priced machine (that is, the capacity demanded by the general PC user) increased about 25 percent per year. Again, the technology improved at nearly twice the rate demanded in the new market: The capacity of new 5.25-inch drives increased about 50 percent per year-between 1980 and 1990. As in the 8-inch for 14-inch substitution, the first firms to produce 5.25-inch drives were entrants; on average, established firms lagged behind entrants by two years. By 1985, only half of the firms producing 8-inch drives had introduced 5.25-inch models. The other half never did.
Growth in the use of 5.25-inch drives occurred in two waves. The first followed creation of a new application for rigid disk drives: desktop computing, in which product attributes such as physical size, relatively unimportant in established applications, were highly valued. The second wave followed substitution of 5.25-inch disks for larger drives in established minicomputer and mainframe computer markets, as the rapidly increasing capacity of 5.25-inch drives intersected the more slowly growing trajectories of capacity demanded in these markets. Of the four leading 8-inch drive makers--Shugart Associates, Micropolis, Priam, and Quantum--only Micropolis survived to become a significant manufacturer of 5.25-inch drives, and that was accomplished only with Herculean managerial effort, as described in chapter 5.
The Pattern Is Repeated: The Emergence of the 3.5-inch Drive
The 3.5-inch drive was first developed in 1984 by Rodime, a Scottish entrant. Sales of this architecture were not significant, however, until Conner Peripherals, a spinoff of 5.25-inch drive makers Seagate and Miniscribe, started shipping product in 1987. Conner had developed a small, lightweight drive architecture that was much more rugged than its 5.25-inch ancestors. It handled electronically functions that had previously been managed with mechanical parts, and it used microcode to replace functions that had previously been addressed electronically. Nearly all of Conner's first year revenues of $113 million came from Compaq Computer, which had aided Conner's start-up with a $30 million investment. The Conner drives were used primarily in a new application--portable and laptop machines, in addition to "small footprint" desktop models--where customers were willing to accept lower capacities and higher costs per megabyte to get lighter weight, greater ruggedness, and lower power consumption.
Seagate engineers were not oblivious to the coming of the 3.5-inch architecture. Indeed, in early 1985, less than one year after Rodime introduced the first 3.5-inch drive and two years before Conner Peripherals started shipping its product, Seagate personnel showed working 3.5-inch prototype drives to customers for evaluation. The initiative for the new drives came from Seagate's engineering organization. Opposition to the program came primarily from the marketing organization and Seagate's executive team; they argued that the market wanted higher capacity drives at a lower cost per megabyte and that 3.5-inch drives could never be built at a lower cost per megabyte than 5.25-inch drives.
Seagate's marketers tested the 3.5-inch prototypes with customers in the desktop computing market it already served--manufacturers like IBM, and value-added resellers of full-sized desktop computer systems. Not surprisingly, they indicated little interest in the smaller drive. They were looking for capacities of 40 and 60 megabytes for their next-generation machines, while the 3.5-inch architecture could provide only 20 MB--and at higher costs.
In response to lukewarm reviews from customers, Seagate's program manager lowered his 3.5-inch sales estimates, and the firm's executives canceled the program. Their reasoning? The markets for 5.25-inch products were larger, and the sales generated by spending the engineering effort on new 5.25-inch products would create greater revenues for the company than would efforts targeted at new 3.5-inch products.
In retrospect, it appears that Seagate executives read the market--at least their own market--very accurately. With established applications and product architectures of their own, such as the IBM XT and AT, these customers saw no value in the improved ruggedness or the reduced size, weight, and power consumption of 3.5-inch products.
Seagate finally began shipping 3.5-inch drives in early 1988--the same year in which the performance trajectory of 3.5-inch drives (shown in Figure 1.7) intersected the trajectory of capacity demanded in desktop computers. By that time, the industry had shipped, cumulatively, nearly $750 million in 3.5-inch products. Interestingly, according to industry observers, as of 1991 almost none of Seagate's 3.5-inch products had been sold to manufacturers of portable/laptop/notebook computers. In other words, Seagate's primary customers were still desktop computer manufacturers, and many of its 3.5-inch drives were shipped with frames for mounting them in computers designed for 5.25-inch drives.
The fear of cannibalizing sales of existing products is often cited as a reason why established firms delay the introduction of new technologies. As the Seagate-Conner experience illustrates, however, if new technologies enable new market applications to emerge, the introduction of new technology may not be inherently cannibalistic. But when established firms wait until a new technology has become commercially mature in its new applications and launch their own version of the technology only in response to an attack on their home markets, the fear of cannibalization can become a self-fulfilling prophecy.
Although we have been looking at Seagate's response to the development of the 3.5-inch drive architecture, its behavior was not atypical; by 1988, only 35 percent of the drive manufacturers that had established themselves making 5.25-inch products for the desktop PC market had introduced 3.5-inch drives. Similar to earlier product architecture transitions, the barrier to development of a competitive 3.5-inch product does not appear to have been engineering-based. As in the 14- to 8-inch transition, the new-architecture drives introduced by the incumbent, established firms during the transitions from 8 to 5.25 inches and from 5.25 to 3.5 inches were fully performance-competitive with those of entrant drives. Rather, the 5.25-inch drive manufacturers seem to have been misled by their customers, notably IBM and its direct competitors and resellers, who themselves seemed as oblivious as Seagate to the potential benefits and possibilities of portable computing and the new disk drive architecture that might facilitate it.
Prairietek, Conner, and the 2.5-inch Drive
In 1989 an industry entrant in Longmont, Colorado, Prairietek, upstaged the industry by announcing a 2.5-inch drive, capturing nearly all $30 million of this nascent market. But Conner Peripherals announced its own 2.5-inch product in early 1990 and by the end of that year had claimed 95 percent of the 2.5-inch drive market. Prairietek declared bankruptcy in late 1991, by which time each of the other 3.5-inch drivemakers--Quantum, Seagate, Western Digital, and Maxtor--had introduced 2.5-inch drives of their own.
What had changed? Had the incumbent leading firms finally learned the lessons of history? Not really. Although Figure 1.7 shows the 2.5-inch drive had significantly less capacity than the 3.5-inch drives, the portable computing markets into which the smaller drives were sold valued other attributes: weight, ruggedness, low power consumption, small physical size, and so on. Along these dimensions, the 2.5-inch drive offered improved performance over that of the 3.5-inch product: It was a sustaining technology. In fact, the computer makers who bought Conner's 3.5-inch drive--laptop computer manufacturers such as Toshiba, Zenith, and Sharp--were the leading makers of notebook computers, and these firms needed the smaller 2.5-inch drive architecture. Hence, Conner and its competitors in the 3.5-inch market followed their customers seamlessly across the transition to 2.5-inch drives.
In 1992, however, the 1.8-inch drive emerged, with a distinctly disruptive character. Although its story will be recounted in detail later, it suffices to state here that by 1995, it was entrant firms that controlled 98 percent of the $130 million 1.8-inch drive market. Moreover, the largest initial market for 1.8-inch drives wasn't in computing at all. It was in portable heart monitoring devices!
Figure 1.8 summarizes this pattern of entrant firms' leadership in disruptive technology. It shows, for example, that two years after the 8-inch drive was introduced, two-thirds of the firms producing it (four of six), were entrants. And, two years after the first 5.25-inch drive was introduced, 80 percent of the firms producing these disruptive drives were entrants.
There are several patterns in the history of innovation in the disk drive industry. The first is that the disruptive innovations were technologically straightforward. They generally packaged known technologies in a unique architecture and enabled the use of these products in applications where magnetic data storage and retrieval previously had not been technologically or economically feasible.
The second pattern is that the purpose of advanced technology development in the industry was always to sustain established trajectories of performance improvement: to reach the higher-performance, higher-margin domain of the upper right of the trajectory map. Many of these technologies were radically new and difficult, but they were not disruptive. The customers of the leading disk drive suppliers led them toward these achievements. Sustaining technologies, as a result, did not precipitate failure.
The third pattern shows that, despite the established firms' technological prowess in leading sustaining innovations, from the simplest to the most radical, the firms that led the industry in every instance of developing and adopting disruptive technologies were entrants to the industry, not its incumbent leaders.
This book began by posing a puzzle: Why was it that firms that could be esteemed as aggressive, innovative, customer-sensitive organizations could ignore or attend belatedly to technological innovations with enormous strategic importance? In the context of the preceding analysis of the disk drive industry, this question can be sharpened considerably. The established firms were, in fact, aggressive, innovative, and customer-sensitive in their approaches to sustaining innovations of every sort. But the problem established firms seem unable to confront successfully is that of downward vision and mobility, in terms of the trajectory map. Finding new applications and markets for these new products seems to be a capability that each of these firms exhibited once, upon entry, and then apparently lost. It was as if the leading firms were held captive by their customers, enabling attacking entrant firms to topple the incumbent industry leaders each time a disruptive technology emerged. Why this happened, and is still happening, is the subject of the next chapter.
What People are Saying About This
“a holy book for entrepreneurs in Silicon Valley ” Bloomberg BusinessWeek
Named one of "The 25 Most Influential Business Management Books" by TIME Magazine (TIME.com)
"I came very late to that book [The Innovator’s Dilemma]. I only read it six months ago. And I haven't stopped thinking of it ever since. Malcolm Gladwell, FastCompany.com
“Clayton Christensen’s The Innovator’s Dilemma (1997) introduced one of the most influential modern business ideasdisruptive innovationand proved that high academic theory need not be a disadvantage in a book aimed at the general reader.” - The Economist
Meet the Author
Clayton M. Christensen is an associate professor of business administration at the Harvard Business School, where he holds a joint appointment with the Technology and Operations Management and General Management faculty groups. His research and writing focus on the management of technological innovation, the problems in finding new markets for new technologies, and the identification and development of organizational capabilities. Prior to joining the Harvard Business School faculty, Professor Christensen served as Chairman and President of Ceramics Process Systems Corporations, a firm he co-founded in 1984 with several MIT professors. He also served as a White House Fellow and as a member of the staff of the Boston Consulting Group. He is the author or co-author of numerous articles in journals such as Research Policy, Strategic Management Journal, Industrial and Corporate Change, the Business History Review, and the Harvard Business Review.
Most Helpful Customer Reviews
See all customer reviews
What it does: Provides insight for business managers that need to deliver continually improved products to their markets. Provides good information about how business have grown and fallen in the face of technical advancement. It does provide case-study backed recommendations on how to manage innovative business ventures. What it does not do: This is not about 'how to innovate,' how to make a better mouse trap, nor even how to find out what your customer wants. Christensen assumes that you have that much together already. The book's emphasis is on business management. Comments: Before reading "The Innovator's Delimma," I thought that I knew what a 'disruptive innovation' was. (After all, I am an experienced engineering manager working in new product development.) But Christensen succeeded in changing my paradigm here and gave me significant insight into the evolution and demise of corporations. Christensen's book takes an academic study of business innovation, drawing extensively on the computer hard drive industry, to divide innovation into two classes: 'sustaining' and 'disruptive.' What many people would be inclined to call 'disruptive innovation' are, in Christensen's view, radical 'sustaining innovations.' The 'disruptive innovations' are initially generally not especially technically innovative, but they fill a market niche and grow to the point of challenging the established. He then digs into details, and pulls out similar supporting case studies of the excavator industry (steam shovels to back hoes), computers and electronics, and lesser detail in discussing changes in retailing. He shares some good insights into why big companies have fallen to upstarts. This is rooted in the natural tendencies of companies to progress from lower-end, lower-margin products to higher-end, higher-margin products. He also shows how companies succeed by innovating and managing to provide what customers' want, and how that focus can cause a company to miss the disruptive technology. His case-study supported recommendations on how companies can address the dilemma seem convincing. A few complaints about the book: 1) the texts and graphs do not agree or match in several cases - this was very annoying, 2) the case studies are largely from manufacturing, so applications to the services industry may not be as straightforward as one would hope, 3) the advice is geared more towards keeping a large corporation alive rather than in assisting small companies grow. He ends with a discussion of how he would manage commercializing an electric car, based on his research findings. (I don't think that GM has been listening.) In my opinion, he didn't follow his own advice well enough in his plan - it relies too much on mainstream market.
Clayton M. Christensen’s work in his book The Innovators Dilemma is both equal parts frightening and entertaining. To the professional world of high-ranking executives and aspiring business owners this book is like a dangerous warning. The book outlines the problems successful companies have in adapting to new emerging markets that utilize disrupting technologies. He backs up his claims by using in depth analysis of real world examples to help frame his perspective and opinion. Christensen creates what he calls the ”failure framework”(Christensen 7), and using the frantic changing of the guard in the disk drive industry elaborates on three main reasons why leading firms tend to stumble repeatedly with stagnation and disruptive technology. Upon finding comparisons in industries unlike the ones previously mentioned, Christensen goes onto promote what he has dubbed the, “principles of disruptive innovation”(Christensen 14). The Innovators Dilemma culminates with an explanation of how to spot threats and opportunities of disruptive technology and their markets as well as where in today’s world disruptions are currently happening. I enjoyed reading The Innovators Dilemma because I believe what he writes about is seen constantly in society. Technology is continually advancing and changing. The same advances in technology have a massive impact on various industries across the world, from hotel enterprises to various outlets of social media. Examining recent technological advances such as Airbnb, Uber and other recent startups we see how disruptive advances in technology can truly be. As Christensen argues, traditional powerhouse companies in their respective markets were unable to capitalize on the evolving technology because they had a responsibility to their customers and their investors to provide great quality and create growth. He provides tremendous examples such as Sears and IBM as leading firms that fell victim to what is described as the “Failure of Success Bias”(Silk 52)in What Is Marketing by Alvin J. Silk. Failure of success bias is a term used to describe firms that lose touch with customers and markets because they fail to understand evolving culture, emerging technologies and repeat past strategies. The book uses Sears as a prime example, a company that once accounted for over 2% of all retail sales in the United States was considered to be in the upper echelon of successful firms in the late twentieth century. As Christensen points out in his failure framework, Sears like other successful firms don’t have the luxury of spending valuable resources on possible disruptive technologies because improving their sustained technologies is more profitable in the short run. Firms can’t spend cash on long-term investments because shareholders voice their opinions for what Christensen calls ‘‘Rational Investments’’(Christensen 71). By using companies like Sears and IBM, Chistensen is able to solidify his argument and delicate elaboration of the failure of success bias. Ultimately showcasing to aspiring business owners and the professional world the importance of recognizing disruptive technologies and the dangers of being successful. What struck me the most was how Christensen’s principles remain relevant in today’s market. It has been almost two decades since the book was first published and yet Christensen’s principles remain at the forefront of emerging technologies. He highlights five fundamental principals that harness the princ
Clayton’s Christensen’s book, “The Innovator’s Dilemma”, is a well-known read amongst business experts, offering a unique look at the constant and repeating reason that businesses fail. Originally published in 1997, Professor Christensen of Harvard Business School writes about what he finds is the key factor is business failure: disruptive technology. Typically technologies seek to improve existing products or markets, which Christensen calls “sustaining technologies”. Sustaining technologies are what businesses handle best, since they address the current needs and wants of customers. However, disruptive technologies quickly change the market, leaving businesses that did not see the change coming in the dust. Sometimes the changes are easy to see, while some are nearly impossibly to spot. Throughout the book, Christensen meticulously breaks down his findings and what led him to his theories, offering countless examples that although now dated, still prove his point as technology evolves exponentially today. By the end, he seeks to provide successful solutions and tips for businesses that face the “innovators dilemma”: making a decision to embrace a disruptive technology, regardless of whether or not it is counter-productive to current business operations. For a large section of the read Christensen describes his theories, using the hard disk industry as a primary example. Seagate was a large manufacturer of 5.25 inch hard drives, and in 1985 developed the first 3.5 inch design. After testing with customers, the initial response was that 3.5 inch drives were not growing in popularity, and were more expensive, causing their development to be shelved. As a result, Seagate continued to develop the 5.25 inch drives, making them perform better and more efficiently, until new and competing companies developed the 3.5 inch drive. Quickly the 3.5 inch drives grew in performance and reliability, becoming more popular as the main components of personal computers and laptops. As a result, Seagate quickly lost its 5.25 inch drive market, not anticipating the rise of the 3.5 inch drives. This example explains Christensen’s theories rather well, demonstrating the need to embrace technologies still in their infancy. Although 5.25 inch drives were the sustaining technology, which drove Seagate’s success for quite some time, the disruptive technology was the smaller and higher performance 3.5 drives, which have made 5.25 drives obsolete. Of course, identifying disruptive technologies is not an easy task, and it is especially more difficult to invest money and resources into a product that will not succeed for an indefinite period of time. In the second half of the book, Christensen offers many ideas for combating this, such as creating strategies to embrace disruptive technologies with research and development plans as opposed to immediately jumping to serving the current market. Another strategy he offers his for a company to take a stake in a disruptive company, typically a startup, to provide necessary resources and share the benefits of the emerging innovation. For example, Johnson & Johnson in the past has acquired small startup companies focused on disruptive technologies at the time, such as disposable contact lenses and blood glucose meters, and provided them research for further development, which today have evolved into billion dollar markets. This seems to be a highly valued solution offered by Christensen, since there are numerous instances in which he dismisses the idea of creating a division within a large company for research on a disruptive technology. Christensen says that typically these divisions are given minimal resources and support, due to the present day sustaining operations that hold back advancement on emerging technology. Overall I felt that Professor Christensen’s theories are very valid in a world where technology continues to grow faster than businesses can keep up. He supports his claims with real examples from the industry, which demonstrate how well managed businesses constantly fail due to their myopic look at the market. The book itself, although slightly dry, provides indispensible information to semi-mature audiences, especially business owners looking towards the future in our techno-centric world. Despite examples that are now semi-dated, Christensen’s findings can still be applied to today’s biggest market changes, as companies such as how Uber, Skype, Amazon, and Google continue to replace traditional markets that were once wildly successful. I recommend this book to any rising entrepreneur, as it offers insight to how startup companies can use disruptive innovation to their advantage, and also to veteran business owners that seek to stay ahead of the technological revolution.
Even if it does get a bit clunky at times, the ideas are important considerations for managers today.
HIGHLY recomended do read this book it is amazing!!!!!!!!!
For those interested in what makes company's succeed or fail when faced with technological change, this book should satisfy. Using the disk drive industry as his main focus, but delving into many other examples, Christensen shows how companies react to disruptive technological change, and why most often they fail to adapt. However, Christensen is not just descriptive, but includes advice on how a business can successfully adapt to disruptive technological change. Highly recommended, but technical at times.
We are all familiar with the story of the innovative and nimble startup surpassing the corporate leader with a disruptive technology that the larger corporation was blind to. Why this happens is the subject of Clayton Christensen's thoughtful Innovator's Dilemma. Although originally published in 1997, it's a highly relevant and useful read today. Christensen was interested in how the market leaders missed the disruptive innovations. At the time, most thought the corporate leaders were just too arrogant or too bureaucratic to see the disruption coming. Could there be more structural forces at play? Turns out, there are. The first half of the book follows the development of the disk drive and the hydraulic excavator to understand and make clear these forces. First, the author distinguishes between sustaining technologies and disruptive technologies. Market leaders, it turns out, are capable of innovation but those innovations typically occur as incremental evolutionary changes to existing products - sustaining innovations. Where they get tripped up is the development of disruptive technologies which fundamentally transform the existing product. In many cases the market leader also developed early forms of the disruptive technology or were at least aware of the development of the technology. Christensen, a professor at the Harvard Business School, makes the case that in ignoring the disruptive technology, the market leader was acting quite rationally. They were following their customers' and corporation's best interests. Christensen discovered that the disruptive technology yields a product that is inferior as measured by the traditional metrics for product quality. In the case of the disk drive it was price/unit storage. For the excavators, it was reach. For the disk drives, the disruption was the introduction of smaller and smaller drives. At each step of the way, these products were costlier than the existing larger drives in terms of price/unit storage. However, their advantages, in terms of other characteristics such as size, weight, and power consumption outweighed nominal improvement in the price/unit storage ratio provided by sustaining technologies. Eventually, price catches up and the disruptive products are better in both sets of characteristics. For the excavator (a big digger), the existing machines used cables to extend and control the basket. The overriding measure of performance was reach and capacity - how far out could the basket reach and grab a bucket of dirt. When hydraulic excavators appeared, their reach was very limited because of the physics of the hydraulic cylinders needed to control the baskets. Even today, a cable excavator will give you a longer reach. However, the hydraulic excavators had advantages of safety (no cable breaks) and had significantly lower maintenance costs. Eventually, as manufacturing of hydraulic excavators grew in practice, reach extended and for many uses such as building foundation excavation and utility pipe laying, as soon as the reach was sufficient for the task, the improvement in safety and the reduced maintenance costs made the hydraulic excavators superior. This book will change the way you think about innovation and the structures needed not only to spark the ideas, but get them built into new product lines. My name is David Marquet, from Practicum, Inc and we help our customers get everyone be a leader and avoid casting employees into follower roles. To co