Introduction to Biomedical Imaging / Edition 1

Hardcover (Print)
Rent
Rent from BN.com
$51.41
(Save 71%)
Est. Return Date: 09/08/2014
Buy New
Buy New from BN.com
$146.91
Buy Used
Buy Used from BN.com
$106.20
(Save 40%)
Item is in good condition but packaging may have signs of shelf wear/aging or torn packaging.
Condition: Used – Good details
Used and New from Other Sellers
Used and New from Other Sellers
from $69.95
Usually ships in 1-2 business days
(Save 60%)
Other sellers (Hardcover)
  • All (11) from $69.95   
  • New (6) from $81.37   
  • Used (5) from $69.95   

Overview

An integrated, comprehensive survey of biomedical imaging modalities

An important component of the recent expansion in bioengineering is the area of biomedical imaging. This book provides in-depth coverage of the field of biomedical imaging, with particular attention to an engineering viewpoint.

Suitable as both a professional reference and as a text for a one-semester course for biomedical engineers or medical technology students, Introduction to Biomedical Imaging covers the fundamentals and applications of four primary medical imaging techniques: magnetic resonance imaging, ultrasound, nuclear medicine, and X-ray/computed tomography.

Taking an accessible approach that includes any necessary mathematics and transform methods, this book provides rigorous discussions of:

  • The physical principles, instrumental design, data acquisition strategies, image reconstruction techniques, and clinical applications of each modality
  • Recent developments such as multi-slice spiral computed tomography, harmonic and sub-harmonic ultrasonic imaging, multi-slice PET scanning, and functional magnetic resonance imaging
  • General image characteristics such as spatial resolution and signal-to-noise, common to all of the imaging modalities
Read More Show Less

Editorial Reviews

Doody's Review Service
Reviewer: E. Russell Ritenour, PhD (University of Minnesota School of Medicine)
Description: This book would help junior-senior level undergraduate engineers understand medical imaging. It builds upon math and physics knowledge that they would have at that point to explain physical aspects of image acquisition as well as introductory image processing.
Purpose: According to the preface, the book is is intended to show how principles of mathematics, physics, and engineering are used in biomedical imaging. These are worthy objectives. It is my experience that even biomedical engineering academic programs are usually weak in imaging instruction. The book meets the stated objectives.
Audience: It is written for junior-to-senior level undergraduate engineers. The author has published in the field and has received recognition for his work..
Features: The first four chapters cover the principles behind and the factors that affect performance and safety of the different types of medical imaging. Material that is common to all images, such as spatial resolution and frequency space analysis, is presented in the fifth chapter. The appendixes deal with complex mathematical topics such as the Fourier transform and back projection. The book's best feature is that it uses a reasonably high level of mathematical explanation at the same time that it is an introduction to this particular topic.
Assessment: This book fills a particular niche in that it is as mathematically sophisticated as upper level undergrad engineering students would need, but still is introductory in the sense that it is assumed that they have no knowledge of the imaging principles or types of imaging used in medicine. It does a particularly good job of covering not only basic imaging, but some of the latest technological developments in the field. It is more mathematically rigorous than a book meant for physicians, such as Hendee and Ritenour's Medical Imaging Physics, 4th edition (John Wiley and Sons, 2002). However, it is not as mathematically rigorous as Hobbie's Intermediate Physics for Medicine and Biology, 3rd edition (Springer-Verlag, 1997). The book by Hobbie is appropriate for physics majors, but would be less satisfying to engineering students.

3 Stars from Doody
Read More Show Less

Product Details

  • ISBN-13: 9780471237662
  • Publisher: Wiley
  • Publication date: 4/28/2003
  • Series: IEEE Press Series on Biomedical Engineering Series , #9
  • Edition description: New Edition
  • Edition number: 1
  • Pages: 264
  • Sales rank: 1,342,741
  • Product dimensions: 6.42 (w) x 9.53 (h) x 0.77 (d)

Meet the Author

ANDREW WEBB, PhD, is a faculty member in the Department of Electrical and Computer Engineering and the Beckman Institute for Advanced Science and Technology at the University of Illinois at Urbana-Champaign. Dr. Webb has contributed to many areas of magnetic resonance imaging including developments in radiofrequency coil design, feedback control of thermal processes, techniques for localized spectroscopy, and functional brain mapping. He was awarded a Whitaker Foundation Research Award and a National Science Foundation Career Award in 1997, a Wolfgang-Paul Prize from the Alexander von Humbolt Foundation in 2001, and Xerox and Willett awards for young faculty in 2002. He is a Senior Member of the IEEE.

Read More Show Less

Read an Excerpt

Introduction to Biomedical Imaging


By Andrew G. Webb

John Wiley & Sons

ISBN: 0-471-23766-3


Chapter One

X-Ray Imaging and Computed Tomography

1.1. GENERAL PRINCIPLES OF IMAGING WITH X-RAYS

X-ray imaging is a transmission-based technique in which X-rays from a source pass through the patient and are detected either by film or an ionization chamber on the opposite side of the body, as shown in Figure 1.1. Contrast in the image between different tissues arises from differential attenuation of X-rays in the body. For example, X-ray attenuation is particularly efficient in bone, but less so in soft tissues. In planar X-ray radiography, the image produced is a simple two-dimensional projection of the tissues lying between the X-ray source and the film. Planar X-ray radiography is used for a number of different purposes: intravenous pyelography (IVP) to detect diseases of the genitourinary tract including kidney stones; abdominal radiography to study the liver, bladder, abdomen, and pelvis; chest radiography for diseases of the lung and broken ribs; and X-ray fluoroscopy (in which images are acquired continuously over a period of several minutes) for a number of different genitourinary and gastrointestinal diseases.

Planar X-ray radiography of overlapping layers of soft tissue or complex bone structures can often be difficult to interpret, even for a skilled radiologist. In these cases, X-ray computed tomography (CT) is used. The basic principles of CT are shown inFigure 1.2. The X-ray source is tightly collimated to interrogate a thin "slice" through the patient. The source and detectors rotate together around the patient, producing a series of one-dimensional projections at a number of different angles. These data are reconstructed to give a two-dimensional image, as shown on the right of Figure 1.2. CT images have a very high spatial resolution (~1 mm) and provide reasonable contrast between soft tissues. In addition to anatomical imaging, CT is the imaging method that can produce the highest resolution angiographic images, that is, images that show blood flow in vessels. Recent developments in spiral and multislice CT have enabled the acquisition of full three-dimensional images in a single patient breath-hold.

The major disadvantage of both X-ray and CT imaging is the fact that the technique uses ionizing radiation. Because ionizing radiation can cause tissue damage, there is a limit on the total radiation dose per year to which a patient can be subjected. Radiation dose is of particular concern in pediatric and obstetric radiology.

1.2. X-RAY PRODUCTION

The X-ray source is the most important system component in determining the overall image quality. Although the basic design has changed little since the mid-1900s, there have been considerable advances in the past two decades in designing more efficient X-ray sources, which are capable of delivering the much higher output levels necessary for techniques such as CT and X-ray fluoroscopy.

1.2.1. The X-Ray Source

The basic components of the X-ray source, also referred to as the X-ray tube, used for clinical diagnoses are shown in Figure 1.3. The production of X-rays involves accelerating a beam of electrons to strike the surface of a metal target. The X-ray tube has two electrodes, a negatively charged cathode, which acts as the electron source, and a positively charged anode, which contains the metal target. A potential difference of between 15 and 150 kV is applied between the cathode and the anode; the exact value depends upon the particular application. This potential difference is in the form of a rectified alternating voltage, which is characterized by its maximum value, the kilovolts peak (k[V.sub.p]). The maximum value of the voltage is also referred to as the accelerating voltage. The cathode consists of a filament of tungsten wire (~200µm in diameter) coiled to form a spiral ~2 mm in diameter and less than 1 cm in height. An electric current from a power source passes through the cathode, causing it to heat up. When the cathode temperature reaches ~2200ºC the thermal energy absorbed by the tungsten atoms allows a small number of electrons to move away from the metallic surface, a process termed thermionic emission. A dynamic equilibrium is set up, with electrons having sufficient energy to escape from the surface of the cathode, but also being attracted back to the metal surface.

The large positive voltage applied to the anode causes these free electrons created at the cathode surface to accelerate toward the anode. The spatial distribution of these electrons striking the anode correlates directly with the geometry of the X-ray beam that enters the patient. Since the spatial resolution of the image is determined by the effective focal spot size, shown in Figure 1.4, the cathode is designed to produce a tight, uniform beam of electrons. In order to achieve this, a negatively charged focusing cup is placed around the cathode to reduce divergence of the electron beam. The larger the negative potential applied to the cup, the narrower is the electron beam. If an extremely large potential (~2 kV) is applied, then the flux of electrons can be switched off completely. This switching process forms the basis for pulsing the X-ray source on and off for applications such as CT, covered in Section 1.10.

At the anode, X-rays are produced as the accelerated electrons penetrate a few tens of micrometers into the metal target and lose their kinetic energy. This energy is converted into X-rays by mechanisms covered in detail in Section 1.2.3. The anode must be made of a metal with a high melting point, good thermal conductivity, and low vapor pressure (to enable a vacuum of less than [10.sup.-7] bar to be established within the vessel). The higher the atomic number of the metal in the target, the higher is the efficiency of X-ray production, or radiation yield. The most commonly used anode metal is tungsten, which has a high atomic number of 74, a high melting point of 3370ºC, and the lowest vapor pressure, [10.sup.-7] bar at 2250ºC, of all metals. Elements with higher atomic number, such as platinum (78) and gold (79), have much lower melting points and so are not practical as anode materials. For mammography, in which the X-rays required are of much lower energy, the anode usually consists of molybdenum rather than tungsten. Even with the high radiation yield of tungsten, most of the energy absorbed by the anode is converted into heat, with only ~1% of the energy being converted into X-rays. If pure tungsten is used, then cracks form in the metal, and so a tungsten-rhenium alloy with between 2% and 10% rhenium has been developed to overcome this problem. The target is about 700 µm thick and is mounted on the same thickness of pure tungsten. The main body of the anode is made from an alloy of molybdenum, titanium, and zirconium and is shaped into a disk.

As shown in Figure 1.4, the anode is beveled, typically at an angle of 5-20º, in order to produce a small effective focal spot size, which in turn reduces the geometric "unsharpness" of the X-ray image (Section 1.6.2). The relationship between the actual focal spot size F and the effective focal spot size ƒ is given by

(1.1) ƒ = F sin [theta]

where [theta] is the bevel angle. Values of the effective focal spot size range from 0.3 mm for mammography to between 0.6 and 1.2 mm for planar radiography. In practice, most X-ray tubes contain two cathode filaments of different sizes to give the option of using a smaller or larger effective focal spot size. The effective focal spot size can also be controlled by increasing or decreasing the value of the negative charge applied to the focusing cup of the cathode.

The bevel angle [theta] also affects the coverage of the X-ray beam, as shown in Figure 1.4. The approximate value of the coverage is given by

(1.2) coverage = 2(source-to-patient distance) tan [theta]

All of the components of the X-ray system are contained within an evacuated vessel. In the past, this was constructed from glass, but more recently glass has been replaced by a combination of metal and ceramic. The major disadvantage with glass is that vapor deposits, from both the cathode filament and the anode target, form on the inner surface of the vessel, causing electrical arcing and reducing the life span of the tube. The evacuated vessel is surrounded by oil for both cooling and electrical isolation. The whole assembly is surrounded by a lead shield with a glass window, through which the X-ray beam is emitted.

1.2.2. X-Ray Tube Current, Tube Output, and Beam Intensity

The tube current (mA) of an X-ray source is defined in terms of the number of electrons per second that travel from the tungsten cathode filament to the anode. Typical values of the tube current are between 50 and 400 milliamps for planar radiography and up to 1000mA for CT. Much lower tube currents are used in continuous imaging techniques such as fluoroscopy. If the value of k[V.sub.p] is increased, the tube current also increases, until a saturation level is reached. This level is determined by the maximum temperature in, or current through, the cathode filament. X-ray tubes are generally characterized in terms of either the tube output or tube power rating. The tube output, measured in watts, is defined as the product of the tube current and the applied potential difference between the anode and cathode. In addition to the k[V.sub.p] value, the tube output also depends upon the strength of the vacuum inside the tube. A stronger vacuum enables a higher electron velocity to be established, and also a greater number of electrons to reach the anode, due to reduced interactions with gas molecules. A high tube output is desirable in diagnostic X-ray imaging because it means that a shorter exposure time can be used, which in turn decreases the possibility of motion-induced image artifacts in moving structures such as the heart.

The tube power rating is defined as the maximum power dissipated in an exposure time of 0.1 s. For example, a tube with a power rating of 10 kW can operate at a k[V.sub.p] of 80 kV with a tube current of 1.25 A for 0.1 s. The ability of the X-ray source to achieve a high tube output is ultimately limited by anode heating. The anode rotates at roughly 3000 rpm, thus increasing the effective surface area of the anode and reducing the amount of power deposited per unit area per unit time. The maximum tube output is, to a first approximation, proportional to the square root of the rotation speed. Anode rotation is accomplished using two stator coils placed close to the neck of the X-ray tube, as shown in Figure 1.3. The magnetic field produced by these stator coils induces a current in the copper rotor of the induction motor which rotates the anode. A molybdenum stem joins the main body of the anode to the rotor assembly. Because molybdenum has a high melting point and low thermal conductivity, heat loss from the anode is primarily via radiation through the vacuum to the vessel walls.

The intensity I of the X-ray beam is defined to be the power incident per unit area and has units of joules/square meter. The power of the beam depends upon two factors, the total number of X-rays and the energy of these X-rays. The number of X-rays produced by the source is proportional to the tube current, and the energy of the X-ray beam is proportional to the square of the accelerating voltage. Therefore, the intensity of the X-ray beam can be expressed as

(1.3) I [varies] [(k[V.sub.p]).sup.2](mA)

In practice, the intensity is not uniform across the X-ray beam, a phenomenon known as the heel effect. This phenomenon is due to differences in the distances that X-rays created in the anode target have to travel through the target in order to be emitted. This distance is longer for X-rays produced at the "anode end" of the target than at the "cathode end." The greater distance at the anode end results in greater absorption of the X-rays within the target and a lower intensity emitted from the source. An increase in the bevel angle can be used to reduce the magnitude of the heel effect, but this also increases the effective focal spot size.

1.2.3. The X-Ray Energy Spectrum

The output of the source consists of X-rays with a broad range of energies, as shown in Figure 1.5. High-energy electrons striking the anode generate X-rays via two mechanisms: bremsstrahlung, also called general, radiation and characteristic radiation. Bremsstrahlung radiation occurs when an electron passes close to a tungsten nucleus and is deflected by the attractive force of the positively charged nucleus. The kinetic energy lost by the deflected electron is emitted as an X-ray. Many such encounters occur for each electron, with each encounter producing a partial loss of the total kinetic energy of the electron. These interactions result in X-rays with a wide range of energies being emitted from the anode. The maximum energy [E.sub.max] of an X-ray created by this process corresponds to a situation in which the entire kinetic energy of the electron is transformed into a single X-ray. The value of [E.sub.max] (in units of keV) therefore corresponds to the value of the accelerating voltage k[V.sub.p]. The efficiency [eta] of bremsstrahlung radiation production is given by

(1.4) [eta] = k(k[V.sub.p])Z

where k is a constant (with a value of 1.1 × [10.sup.-9] for tungsten) and Z is the atomic number of the target metal. Bremsstrahlung radiation is characterized by a linear decrease in X-ray intensity with increasing X-ray energy. However, many X-rays with low energies are absorbed within the X-ray tube and its housing, resulting in the "internally filtered" spectrum shown in Figure 1.5. Additional filters external to the tube are used in order to reduce further the number of X-rays with low energies that are emitted from the tube because such X-rays do not have sufficient energy to pass through the patient and reach the detector, and therefore add to the patient dose, but are not useful for imaging. For values of k[V.sub.p] up to 50 kV, 0.5-mm-thick aluminum is used; between 50 and 70 kV, 1.5-mm-thick aluminum is used; and above 70 kV, 2.5-mm-thick aluminum is used. These filters can reduce skin dose by up to a factor of 80. For mammography studies, where the k[V.sub.p] value is less than 30 kV, a 30-µm-thick molybdenum filter is typically used.

Sharp peaks are also present in the X-ray energy spectrum, and these arise from the second mechanism, characteristic radiation. Surrounding the nucleus of any atom are a number of electron "shells" as shown in Figure 1.6.

Continues...


Excerpted from Introduction to Biomedical Imaging by Andrew G. Webb Excerpted by permission.
All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.

Read More Show Less

Table of Contents

Preface.

Acknowledgments.

1. X-Ray Imaging and Computed Tomography.

1.1 General Principles of Imaging with X-Rays.

1.2 X-Ray Production.

1.3 Interactions of X-Rays with Tissue.

1.4 Linear and Mass Attenuation Coefficients of X-Rays in Tissue.

1.5 Instrumentation for Planar X-Ray Imaging.

1.6 X-Ray Image Characteristics.

1.7 X-Ray Contrast Agents.

1.8 X-Ray Imaging Methods.

1.9 Clinical Applications of X-Ray Imaging.

1.10 Computed Tomography.

1.11 Image Processing for Computed Tomography.

1.12 Spiral/Helical Computed Tomography.

1.13 Multislice Spiral Computed Tomography.

1.14 Radiation Dose.

1.15 Clinical Applications of Computed Tomography.

2. Nuclear Medicine.

2.1 General Principles of Nuclear Medicine.

2.2 Radioactivity.

2.3 The Production of Radionuclides.

2.4 Types of Radioactive Decay.

2.5 The Technetium Generator.

2.6 The Biodistribution of Technetium-Based Agents within the Body.

2.7 Instrumentation: The Gamma Camera.

2.8 Image Characteristics.

2.9 Single Photon Emission Computed Tomography.

2.10 Clinical Applications of Nuclear Medicine.

2.11 Positron Emission Tomography.

3. Ultrasonic Imaging.

3.1 General Principles of Ultrasonic Imaging.

3.2 Wave Propagation and Characteristic Acoustic Impedance.

3.3 Wave Reflection and Refraction.

3.4 Energy Loss Mechanisms in Tissue.

3.5 Instrumentation.

3.6 Diagnostic Scanning Modes.

3.7 Artifacts in Ultrasonic Imaging.

3.8 Image Characteristics.

3.9 Compound Imaging.

3.10 Blood Velocity Measurements Using Ultrasound.

3.11 Ultrasound Contrast Agents, Harmonic Imaging, and Pulse Inversion Techniques.

3.12 Safety and Bioeffects in Ultrasonic Imaging.

3.13 Clinical Applications of Ultrasound.

4. Magnetic Resonance Imaging.

4.1 General Principles of Magnetic Resonance Imaging.

4.2 Nuclear Magnetism.

4.3 Magnetic Resonance Imaging.

4.4 Instrumentation.

4.5 Imaging Sequences.

4.6 Image Characteristics.

4.7 MRI Contrast Agents.

4.8 Magnetic Resonance Angiography.

4.9 Diffusion-Weighted Imaging.

4.10 In Vivo Localized Spectroscopy.

4.11 Functional MRI.

4.12 Clinical Applications of MRI.

5. General Image Characteristics.

5.1 Introduction.

5.2 Spatial Resolution.

5.3 Signal-to-Noise Ratio.

5.4 Contrast-to-Noise Ratio.

5.5 Image Filtering.

5.6 The Receiver Operating Curve.

Appendix A: The Fourier Transform.

Appendix B: Backprojection and Filtered Backprojection.

Abbreviations.

Index.

Read More Show Less

Customer Reviews

Be the first to write a review
( 0 )
Rating Distribution

5 Star

(0)

4 Star

(0)

3 Star

(0)

2 Star

(0)

1 Star

(0)

Your Rating:

Your Name: Create a Pen Name or

Barnes & Noble.com Review Rules

Our reader reviews allow you to share your comments on titles you liked, or didn't, with others. By submitting an online review, you are representing to Barnes & Noble.com that all information contained in your review is original and accurate in all respects, and that the submission of such content by you and the posting of such content by Barnes & Noble.com does not and will not violate the rights of any third party. Please follow the rules below to help ensure that your review can be posted.

Reviews by Our Customers Under the Age of 13

We highly value and respect everyone's opinion concerning the titles we offer. However, we cannot allow persons under the age of 13 to have accounts at BN.com or to post customer reviews. Please see our Terms of Use for more details.

What to exclude from your review:

Please do not write about reviews, commentary, or information posted on the product page. If you see any errors in the information on the product page, please send us an email.

Reviews should not contain any of the following:

  • - HTML tags, profanity, obscenities, vulgarities, or comments that defame anyone
  • - Time-sensitive information such as tour dates, signings, lectures, etc.
  • - Single-word reviews. Other people will read your review to discover why you liked or didn't like the title. Be descriptive.
  • - Comments focusing on the author or that may ruin the ending for others
  • - Phone numbers, addresses, URLs
  • - Pricing and availability information or alternative ordering information
  • - Advertisements or commercial solicitation

Reminder:

  • - By submitting a review, you grant to Barnes & Noble.com and its sublicensees the royalty-free, perpetual, irrevocable right and license to use the review in accordance with the Barnes & Noble.com Terms of Use.
  • - Barnes & Noble.com reserves the right not to post any review -- particularly those that do not follow the terms and conditions of these Rules. Barnes & Noble.com also reserves the right to remove any review at any time without notice.
  • - See Terms of Use for other conditions and disclaimers.
Search for Products You'd Like to Recommend

Recommend other products that relate to your review. Just search for them below and share!

Create a Pen Name

Your Pen Name is your unique identity on BN.com. It will appear on the reviews you write and other website activities. Your Pen Name cannot be edited, changed or deleted once submitted.

 
Your Pen Name can be any combination of alphanumeric characters (plus - and _), and must be at least two characters long.

Continue Anonymously
Sort by: Showing 1 Customer Reviews
  • Anonymous

    Posted January 28, 2006

    very horrible book

    Well the book title is introduction to biomedical imaging however, it does cover introduction in biomedical imaging. It assumes that the reader already had advanced knowledge in imaging techniques.

    Was this review helpful? Yes  No   Report this review
Sort by: Showing 1 Customer Reviews

If you find inappropriate content, please report it to Barnes & Noble
Why is this product inappropriate?
Comments (optional)