Introduction to Manufacturing Processes / Edition 1

Paperback (Print)
Rent
Rent from BN.com
$30.12
(Save 83%)
Est. Return Date: 11/16/2014
Buy Used
Buy Used from BN.com
$111.89
(Save 37%)
Item is in good condition but packaging may have signs of shelf wear/aging or torn packaging.
Condition: Used – Good details
Used and New from Other Sellers
Used and New from Other Sellers
from $63.76
Usually ships in 1-2 business days
(Save 64%)
Other sellers (Paperback)
  • All (12) from $63.76   
  • New (5) from $76.15   
  • Used (7) from $63.76   
Close
Sort by
Page 1 of 2
Showing 1 – 10 of 12 (2 pages)
Note: Marketplace items are not eligible for any BN.com coupons and promotions
$63.76
Seller since 2011

Feedback rating:

(30)

Condition:

New — never opened or used in original packaging.

Like New — packaging may have been opened. A "Like New" item is suitable to give as a gift.

Very Good — may have minor signs of wear on packaging but item works perfectly and has no damage.

Good — item is in good condition but packaging may have signs of shelf wear/aging or torn packaging. All specific defects should be noted in the Comments section associated with each item.

Acceptable — item is in working order but may show signs of wear such as scratches or torn packaging. All specific defects should be noted in the Comments section associated with each item.

Used — An item that has been opened and may show signs of wear. All specific defects should be noted in the Comments section associated with each item.

Refurbished — A used item that has been renewed or updated and verified to be in proper working condition. Not necessarily completed by the original manufacturer.

Good
May NOT include supplemental materials such as CDs and access codes. Ships next business day! Choose expedited shipping for delivery in 2-6 business days! May include some ... highlighting or writing. Read more Show Less

Ships from: Vancouver, WA

Usually ships in 1-2 business days

  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$76.15
Seller since 2010

Feedback rating:

(30)

Condition: New
0470632283 PAPERBACK. NEW. Never used. We do not ship to PO Box/APO/FPO addresses.

Ships from: Cupertino, CA

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$90.75
Seller since 2007

Feedback rating:

(2369)

Condition: Very Good
We select best available book. Used items may have varying degrees of wear, highlighting, etc. May or may not include supplements such as infotrac or other web access codes. Fast ... & reliable delivery. Exceptional customer service. Standard shipping is USPS Standard Mail. We ship expedited orders by UPS Ground. Read more Show Less

Ships from: Bloomington, IN

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$91.31
Seller since 2009

Feedback rating:

(10334)

Condition: Good
Used - Very Good Book. Shipped from US within 4 to 14 business days. Established seller since 2000

Ships from: Secaucus, NJ

Usually ships in 1-2 business days

  • Standard, 48 States
  • Standard (AK, HI)
$91.80
Seller since 2005

Feedback rating:

(49359)

Condition: Very Good
Ships same day or next business day via UPS (Priority Mail for AK/HI/APO/PO Boxes)! Used sticker and some writing and/or highlighting. Used books may not include working access ... code or dust jacket. Read more Show Less

Ships from: Columbia, MO

Usually ships in 1-2 business days

  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$96.56
Seller since 2014

Feedback rating:

(0)

Condition: Good
0470632283 These books are collected from multiple sources and multiple copies are usually available. When checked in they are all verified that they are in ?Good? to ?Like New? ... condition. Although we do check and when sure the information is located in the title above, it is impossible to be 100% sure that each book has all the supplemental material (i.e, unused access card, CD/DVD etc.). These books are not available for expedited shipping and may take up to 14 business days to receive. Read more Show Less

Ships from: Woodland Hills, CA

Usually ships in 1-2 business days

  • Standard, 48 States
  • Express, 48 States
$99.95
Seller since 2014

Feedback rating:

(11)

Condition: Acceptable
Chichester 2011 Paperback Fair. 720 p. Illustrations. Intended for college/higher education audience.

Ships from: Pueblo West, CO

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$138.85
Seller since 2008

Feedback rating:

(873)

Condition: New
0470632283 Brand New. Exact book as advertised. Delivery in 4-14 business days (not calendar days). We are not able to expedite delivery.

Ships from: Romulus, MI

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
$156.92
Seller since 2005

Feedback rating:

(49359)

Condition: New
Ships same day or next business day! UPS(AK/HI Priority Mail)/ NEW book

Ships from: Columbia, MO

Usually ships in 1-2 business days

  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$162.99
Seller since 2014

Feedback rating:

(40)

Condition: Good
Buy with Confidence. Excellent Customer Support. We ship from multiple US locations. No CD, DVD or Access Code Included.

Ships from: Fort Mill, SC

Usually ships in 1-2 business days

  • Standard, 48 States
Page 1 of 2
Showing 1 – 10 of 12 (2 pages)
Close
Sort by

Overview

Michele Groover's first issue of Manufacturing Processes builds upon much of the content from his 4th edition, of Fundamentals of Modern Manufacturing. The text incorporates design topics, balance quantitative and qualitative coverage; offers most current information on latest developments in the field; and makes the topic of manufacturing processes exciting with visualizing processes.

The text also includes several case studies expanded upon online with related assessment content along with videos with related assessment questions. The text includes "hot topics" pedagogical elements with discussions ranging from lean manufacturing to green engineering to nanotechnology as well as an end chapter containing "putting it all together" systems analysis type exercises.

Read More Show Less

Product Details

  • ISBN-13: 9780470632284
  • Publisher: Wiley
  • Publication date: 10/11/2011
  • Series: CourseSmart Series
  • Edition description: New Edition
  • Edition number: 1
  • Pages: 720
  • Sales rank: 849,162
  • Product dimensions: 7.95 (w) x 9.88 (h) x 0.94 (d)

Table of Contents

1 INTRODUCTION AND OVERVIEW OF MANUFACTURING.

1.1 What Is Manufacturing?

1.2 Manufacturing Processes.

1.3 Organization of the Book.

Part I Engineering Materials and Product Attributes.

2 ENGINEERING MATERIALS.

2.1 Metals and Their Alloys.

2.2 Ceramics.

Groover: Introduction to Manufacturing Processes.

2.3 Polymers.

2.4 Composites.

3 PROPERTIES OF ENGINEERING MATERIALS.

3.1 Stress–Strain Relationships.

3.2 Hardness.

3.3 Effect of Temperature on Mechanical Properties.

3.4 Fluid Properties.

3.5 Viscoelastic Behavior of Polymers.

3.6 Volumetric and Melting Properties.

3.7 Thermal Properties.

Groover: Introduction to Manufacturing Processes.

4 DIMENSIONS, TOLERANCES AND SURFACES.

4.1 Dimensions, Tolerances, and Related Attributes.

4.2 Surfaces.

4.3 Effect of Manufacturing Processes.

Appendix A4 Measurement of Dimensions and Surfaces.

A4.1 Conventional Measuring Instruments and Gages.

A4.2 Measurement of Surfaces.

Part II Solidification Processes.

5 FUNDAMENTALS OF METAL CASTING.

5.1 Overview of Casting Technology.

Groover: Introduction to Manufacturing Processes.

5.2 Heating and Pouring.

5.3 Solidification and Cooling.

6 METAL CASTING PROCESSES.

6.1 Sand Casting.

6.2 Other Expendable-Mold Casting Processes.

6.3 Permanent-Mold Casting Processes.

Groover: Introduction to Manufacturing Processes.

6.4 Foundry Practice.

6.5 Casting Quality.

6.6 Metals for Casting.

6.7 Product Design Considerations.

7 GLASSWORKING.

7.1 Raw Materials Preparation and Melting.

7.2 Shaping Processes in Glassworking.

7.3 Heat Treatment and Finishing.

7.4 Product Design Considerations.

8 SHAPING PROCESSES FOR PLASTICS.

8.1 Properties of Polymer Melts.

Groover: Introduction to Manufacturing Processes.

8.2 Extrusion.

8.3 Production of Sheet and Film.

8.4 Fiber and Filament Production (Spinning).

8.5 Coating Processes.

8.6 Injection Molding.

8.7 Compression and Transfer Molding.

8.8 Blow Molding and Rotational Molding.

8.9 Thermoforming.

8.10 Casting.

8.11 Polymer Foam Processing and Forming.

8.12 Product Design Considerations.

Groover: Introduction to Manufacturing Processes.

9 SHAPING PROCESSES FOR RUBBER AND POLYMER MATRIX COMPOSITES.

9.1 Rubber Processing and Shaping.

9.2 Manufacture of Tires and Other Rubber Products.

9.3 PMC Shaping Processes and Materials.

9.4 Open Mold Processes.

9.5 Closed Mold Processes.

Groover: Introduction to Manufacturing Processes.

9.6 Filament Winding.

9.7 Pultrusion Processes.

9.8 Other PMC Shaping Processes.

Part III Particulate Processing of Metals and Ceramics.

10 POWDER METALLURGY.

10.1 Production of Metallic Powders.

10.2 Conventional Pressing and Sintering.

10.3 Alternative Pressing and Sintering Techniques.

10.4 Materials and Products for PM.

10.5 Design Considerations in Powder Metallurgy.

Groover: Introduction to Manufacturing Processes.

Appendix 10 Characterization of Engineering Powders.

A10.1 Geometric Features.

A10.2 Other Features.

11 PROCESSING OF CERAMICS AND CERMETS.

11.1 Processing of Traditional Ceramics.

11.2 Processing of New Ceramics.

11.3 Processing of Cermets.

11.4 Product Design Considerations.

Part IV Metal Forming and Sheet Metalworking.

12 FUNDAMENTALS OF METAL FORMING.

12.1 Overview of Metal Forming.

12.2 Material Behavior in Metal Forming.

12.3 Temperature in Metal Forming.

Groover: Introduction to Manufacturing Processes.

12.4 Friction and Lubrication in Metal Forming.

13 BULK DEFORMATION PROCESSES IN METAL WORKING.

13.1 Rolling.

13.2 Forging.

13.3 Extrusion.

13.4 Wire and Bar Drawing.

14 SHEET METALWORKING.

Groover: Introduction to Manufacturing Processes.

14.1 Cutting Operations.

14.2 Bending Operations.

14.3 Drawing.

14.4 Other Sheet-Metal-Forming Operations.

14.5 Dies and Presses for Sheet-Metal Processes.

14.6 Sheet-Metal Operations Not Performed on Presses.

Groover: Introduction to Manufacturing Processes.

Part V Material Removal Processes.

15 THEORY OF METAL MACHINING.

15.1 Overview of Machining Technology.

15.2 Theory of Chip Formation in Metal Machining.

15.3 Force Relationships and the Merchant Equation.

15.4 Power and Energy Relationships in Machining.

15.5 Cutting Temperature.

16 MACHINING OPERATIONS AND MACHINE TOOLS.

16.1 Machining and Part Geometry.

16.2 Turning and Related Operations.

16.3 Drilling and Related Operations.

Groover: Introduction to Manufacturing Processes.

16.4 Milling.

16.5 Machining Centers and Turning Centers.

16.6 Other Machining Operations.

16.7 High-Speed Machining.

16.8 Tolerances and Surface Finish.

16.9 Product Design Considerations in Machining.

17 CUTTING-TOOL TECHNOLOGY AND RELATED TOPICS.

17.1 Tool Life.

17.2 Tool Materials.

Groover: Introduction to Manufacturing Processes.

17.3 Tool Geometry.

17.4 Cutting Fluids.

17.5 Machinability.

17.6 Machining Economics.

18 GRINDING AND OTHER ABRASIVE PROCESSES.

18.1 Grinding.

18.2 Related Abrasive Processes.

Groover: Introduction to Manufacturing Processes.

19 NONTRADITIONAL MACHINING PROCESSES.

19.1 Mechanical Energy Processes.

19.2 Electrochemical Machining Processes.

19.3 Thermal Energy Processes.

19.4 Chemical Machining.

19.5 Application Considerations.

Part VI Property Enhancing and Surface Processing Operations.

20 HEAT TREATMENT OF METALS.

20.1 Annealing.

20.2 Martensite Formation in Steel.

Groover: Introduction to Manufacturing Processes.

20.3 Precipitation Hardening.

20.4 Surface Hardening.

21 SURFACE PROCESSING OPERATIONS.

21.1 Industrial Cleaning Processes.

21.2 Diffusion and Ion Implantation.

21.3 Plating and Related Processes.

21.4 Conversion Coating.

21.5 Vapor Deposition Processes.

21.6 Organic Coatings.

Groover: Introduction to Manufacturing Processes.

Part VII Joining and Assembly Processes

22 FUNDAMENTALS OF WELDING.

22.1 Overview of Welding Technology.

22.2 The Weld Joint.

22.3 Physics of Welding.

22.4 Features of a Fusion-Welded Joint.

23 WELDING PROCESSES.

23.1 Arc Welding.

23.2 Resistance Welding.

23.3 Oxyfuel Gas Welding.

Groover: Introduction to Manufacturing Processes.

23.4 Other Fusion-Welding Processes.

23.5 Solid-State Welding.

23.6 Weld Quality.

23.7 Design Considerations in Welding.

24 BRAZING, SOLDERING, AND ADHESIVE BONDING.

24.1 Brazing.

24.2 Soldering.

24.3 Adhesive Bonding.

25 MECHANICAL ASSEMBLY.

25.1 Threaded Fasteners.

Groover: Introduction to Manufacturing Processes.

25.2 Rivets and Eyelets.

25.3 Assembly Methods Based on Interference Fits.

25.4 Other Mechanical Fastening Methods.

25.5 Molding Inserts and Integral Fasteners.

25.6 Design for Assembly.

Part VIII Special Processing and Assembly Technologies.

26 RAPID PROTOTYPING.

26.1 Fundamentals of Rapid Prototyping.

26.2 Rapid Prototyping Technologies.

26.3 Application Issues in Rapid Prototyping.

27 MICROFABRICATION AND NANOFABRICATION TECHNOLOGIES.

27.1 Microsystem Products.

Groover: Introduction to Manufacturing Processes.

27.2 Microfabrication Processes.

27.3 Nanotechnology Products.

27.4 Scanning Probe Microscopes.

27.5 Nanofabrication Processes.

Part IX Systems Topics in Manufacturing.

28 PRODUCTION SYSTEMS AND PROCESS PLANNING.

28.1 Overview of Production Systems.

28.2 Process Planning.

28.3 Concurrent Engineering and Design for Manufacturability.

29 SURVEY OF AUTOMATION AND MANUFACTURING SYSTEMS.

Groover: Introduction to Manufacturing Processes.

29.1 Computer Numerical Control.

29.2 Cellular Manufacturing.

29.3 Flexible Manufacturing Systems and Cells.

29.4 Lean Production.

29.5 Computer Integrated Manufacturing.

30 QUALITY CONTROL AND INSPECTION.

30.1 Product Quality.

30.2 Process Capability and Tolerances.

30.3 Statistical Process Control.

30.4 Quality Programs in Manufacturing.

Groover: Introduction to Manufacturing Processes.

30.5 Inspection Principles.

30.6 Modern Inspection Technologies.

Read More Show Less

Customer Reviews

Be the first to write a review
( 0 )
Rating Distribution

5 Star

(0)

4 Star

(0)

3 Star

(0)

2 Star

(0)

1 Star

(0)

Your Rating:

Your Name: Create a Pen Name or

Barnes & Noble.com Review Rules

Our reader reviews allow you to share your comments on titles you liked, or didn't, with others. By submitting an online review, you are representing to Barnes & Noble.com that all information contained in your review is original and accurate in all respects, and that the submission of such content by you and the posting of such content by Barnes & Noble.com does not and will not violate the rights of any third party. Please follow the rules below to help ensure that your review can be posted.

Reviews by Our Customers Under the Age of 13

We highly value and respect everyone's opinion concerning the titles we offer. However, we cannot allow persons under the age of 13 to have accounts at BN.com or to post customer reviews. Please see our Terms of Use for more details.

What to exclude from your review:

Please do not write about reviews, commentary, or information posted on the product page. If you see any errors in the information on the product page, please send us an email.

Reviews should not contain any of the following:

  • - HTML tags, profanity, obscenities, vulgarities, or comments that defame anyone
  • - Time-sensitive information such as tour dates, signings, lectures, etc.
  • - Single-word reviews. Other people will read your review to discover why you liked or didn't like the title. Be descriptive.
  • - Comments focusing on the author or that may ruin the ending for others
  • - Phone numbers, addresses, URLs
  • - Pricing and availability information or alternative ordering information
  • - Advertisements or commercial solicitation

Reminder:

  • - By submitting a review, you grant to Barnes & Noble.com and its sublicensees the royalty-free, perpetual, irrevocable right and license to use the review in accordance with the Barnes & Noble.com Terms of Use.
  • - Barnes & Noble.com reserves the right not to post any review -- particularly those that do not follow the terms and conditions of these Rules. Barnes & Noble.com also reserves the right to remove any review at any time without notice.
  • - See Terms of Use for other conditions and disclaimers.
Search for Products You'd Like to Recommend

Recommend other products that relate to your review. Just search for them below and share!

Create a Pen Name

Your Pen Name is your unique identity on BN.com. It will appear on the reviews you write and other website activities. Your Pen Name cannot be edited, changed or deleted once submitted.

 
Your Pen Name can be any combination of alphanumeric characters (plus - and _), and must be at least two characters long.

Continue Anonymously

    If you find inappropriate content, please report it to Barnes & Noble
    Why is this product inappropriate?
    Comments (optional)