MEMS and Nanotechnology, Volume 5: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics

by Gordon Shaw III (Editor), Barton C. Prorok (Editor), LaVern Starman (Editor), Cosme Furlong (Editor)

Overview

MEMS and Nanotechnology, Volume 5: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the fifth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including:
Microelectronics Packaging
Single Atom/Molecule Mechanical Testing
MEMS Devices & Fabrication
In-Situ Mechanical Testing
Nanoindentation
Experimental Analysis of Low-Dimensional Materials for Nanotechnology.

Product Details

ISBN-13:	9781040602188
Publisher:	River Publishers
Publication date:	08/07/2025
Sold by:	Barnes & Noble
Format:	eBook
Pages:	134
File size:	20 MB
Note:	This product may take a few minutes to download.

About the Author

Gordon Shaw III, NIST, Gaithersburg, USA. Barton C. Prorok, Auburn University, Auburn, USA. LaVern Starman, Air Force Research Laboratory, Wright-Patterson AFB, USA. Cosme Furlong, Worcester Polytechnic Institute, Worcester, USA.

Table of Contents

1 Warpage Measurement of Simulated Electronic Packaging Assembly 2 Nanomechanical Characterization of Lead Free Solder Joints 3 In-Situ Surface Mount Process Characterization Using Digital Image Correlation 4 Acoustic Waveform Energy as an Interconnect Damage Indicator 5 Shape Optimization of Cantilevered Piezoelectric Devices 6 Unique Fabrication Method for Novel MEMS Micro-contact Structure 7 A Frequency Selective Surface Design Fabricated with Tunable RF Meta-Atoms 8 Stress Characterization in Si/SiO2 Spherical Shells Used in Micro-robotics 9 MEMS Cantilever Sensor for Photoacoustic Detection of Terahertz Radiation 10 In-Plane MEMS Acoustic Emission Sensors Development and Experimental Characterization 11 New Insight into Pile-up in Thin Film Indentation 12 Mapping the Mechanical Properties of Alloyed Magnesium (AZ 61) 13 Temperature Dependent Micromechanical Testing on the Formation of Cu/Sn Intermetallic Thin Films 14 Molecular Interactions on InxGa1_xN 15 Timoshenko Beam Model for Lateral Vibration of Liquid-Phase Microcantilever-Based Sensors 16 Improvement in Uncertainty of Tuning Fork-Based Force Sensor Stiffness Calibration via the Indentation Method Using Direct Determination of Contact and Machine Compliance 17 Flexible Terahertz Metamaterials for Frequency Selective Surfaces.