Optical Measurements, Modeling, and Metrology, Volume 5: Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics

by Tom Proulx (Editor)

Overview

Optical Measurements, Modeling, and Metrology represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; MEMS and Nanotechnology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

Product Details

ISBN-13:	9781040603154
Publisher:	River Publishers
Publication date:	08/07/2025
Sold by:	Barnes & Noble
Format:	eBook
Pages:	412
File size:	54 MB
Note:	This product may take a few minutes to download.

About the Author

Dr. Tom Proulx is the Executive Director of the Society for Experimental Mechanics, Inc.

Table of Contents

1 3D Structures of Alloys and Nanoparticles Observed by Electron Tomography 2 Damage Characterization in Dual-phase Steels Using X-ray Tomography 3 In-situ Synchrotron-radiation Computed Laminography Observation of Ductile Fracture4 Understanding the Mechanical Behaviour of a High Manganese TWIP Steel by the Means of in Situ 3D X ray Tomography 5 Mechanical Properties of Monofilament Entangled Materials 6 Characterisation of Mechanical Properties of Cellular Ceramic Materials Using X-ray Computed Tomography 7 Multiaxial Stress State Assessed by 3D X-ray Tomography on Semi-crystalline Polymers 8 Effect of Porosity on the Fatigue Life of a Cast al Alloy 9 Fatigue Mechanisms of Brazed Al-Mn Alloys Used in Heat Exchangers 10 Three Dimensional Confocal Microscopy Study of Boundaries between Colloidal Crystals 11 Scale Independent Fracture Mechanics 12 Consistent Embedding: A Theoretical Framework for Multiscale Modelling 13 Analysis of Crystal Rotation by Taylor Theory 14 Numerical Solution of the Walgraef-aifantis Model for Simulation of Dislocation Dynamics in Materials Subjected to Cyclic Loading 15 Photoelastic Determination of Boundary Condition for Finite Element Analysis 16 Discussion on Hybrid Approach to Determination of Cell Elastic Properties 17 Mesh Refinement for Inverse Problems with Finite Element Models 18 Assessment of Inverse Procedures for the Identification of Hyperelastic Material Parameters 19 Digital Image Correlation Through a Rigid Borescope 20 Scale Independent Approach to Strength Physics and Optical Interferometry 21 Optical Techniques That Measure Displacements: A Review of the Basic Principles 22 Studying Phase Transformations in a Shape Memory Alloy with Full-field Measurement Techniques 23 Correlation Between Mechanical Strength and Surface Conditions of Laser Assisted Machined Silicon Nitride 24 Analysis of Speckle Photographs by Subtracting Phase Functions of Digital Fourier Transforms 25 Measurement of Residual Stresses in Diamond Coated Substrates Utilizing Coherent Light Projection Moiré Interferometry 26 Automatic Acquisition and Processing of Large Sets of Holographic Measurements in Medical Research 27 Adaptative Reconstruction Distance in a Lensless Digital Holographic Otoscope 28 3D Shape Measurements With High-speed Fringe Projection and Temporal Phase Unwrapping 29 Measuring Local Mechanical Properties of Membranes Applying Coherent Light Projection Moiré Interferometry 30 Experimental Analysis of Foam Sandwich Panels With Projection Moiré 31 Panoramic Stereo DIC-based Strain Measurement on Submerged Objects 32 Advances in the Measurement of Surfaces Properties Utilizing Illumination at Angles Beyond Total Reflection 33 Filters with Noise/Phase Jump Detection Scheme for Image Reconstruction 34 An Instantaneous Phase Shifting ESPI System for Dynamic Deformation Measurement 35 Development of Linear LED Device for Shape Measurement by Light Source Stepping Method 36 Calibration Method for Strain Measurement Using Multiple Cameras in Digital Holography 37 Performance Assessment of Strain Measurement With an Ultra High Speed Camera 38 Rigid Body Correction Using 3D Digital Photogrammetry for Rotating Structures 39 Development of Sampling Moire Camera for Landslide Prediction by Small Displacement Measurement 40 Energy Dissipation in Impact Absorber 41 Mechanics Behind 4D Interferometric Measurement of Biofilm Mediated Tooth Decay 42 Validating Road Profile Reconstruction Methodology Using ANN Simulation on Experimental Data 43 Electro-optical Property of Sol-gel-derived PLZT7/30/70 Thin Films 44 Decoupling Six Effective Parameters of Anisotropic Optical Materials Using Stokes Polarimetry 45 Measurement of Creep Deformation in Stainless Steel Welded Joints 46 Thermal Deformation Measurement in Thermoelectric Coolers by ESPI and DIC Method 47 Structural Health Monitoring Using Digital Speckle Photography 48 Determining the Strain Distribution in Bonded and Bolted/Bonded Composite Butt Joints Using the Digital Image Correlation Technique and Finite Element Methods 49 Improved Spectral Approach for Continuous Displacement Measurements From Digital Images 50 Experimental Testing (2D DIC) and FE Modelling of T-stub Model.