×

Uh-oh, it looks like your Internet Explorer is out of date.

For a better shopping experience, please upgrade now.

Produced Water Treatment Field Manual
     

Produced Water Treatment Field Manual

by Maurice Stewart, Ken Arnold
 

See All Formats & Editions

ISBN-10: 1856179842

ISBN-13: 9781856179843

Pub. Date: 08/22/2011

Publisher: Elsevier Science

Produced Water Treatment Field Manual presents different methods used in produced water treatment systems in the oil and gas industry. Produced water is salty water that is produced as a byproduct along with oil or gas during the treatment. Water is brought along with the oil and gas when these are lifted from the surface. The water is then treated before the

Overview

Produced Water Treatment Field Manual presents different methods used in produced water treatment systems in the oil and gas industry. Produced water is salty water that is produced as a byproduct along with oil or gas during the treatment. Water is brought along with the oil and gas when these are lifted from the surface. The water is then treated before the discharge or re-injection process.
In the introduction, the book discusses the basic terms and concepts that describe produced water treatment. It also presents the different methods involved in the treatment. It further discusses the design, operation, maintenance, and sizing of the produced water treatment systems. In the latter part of the book, the ways to remove impurities in water are discussed, including choosing the proper filter, filtering equipment, filtering methods, and filtering types.
The main objective of this book is to provide information about proper water management. Readers who are involved in this field will find this book relevant.

  • Present a description of the various water treating equipment that are currently in use
  • Provide performance data for each unit
  • Develop a "feel" for the parameters needed for design and their relative importance
  • Develop and understanding of the uncertainties and assumptions inherent in the design of the various items of equipment
  • Outline sizing procedures and equipment selection

Product Details

ISBN-13:
9781856179843
Publisher:
Elsevier Science
Publication date:
08/22/2011
Pages:
244
Product dimensions:
4.40(w) x 7.30(h) x 0.60(d)

Table of Contents

Part One: Basic considerations

Chapter One: Pre-treatment considerations

Chapter Two: Upstream equipment considerations

Chapter Three: Process considerations

Part Two: Water treating equipment

Chapter Four: API Separators

Chapter Five: Skimmer Tanks and Vessels

Chapter Six: Plate Separators (Downflow/Upflow/Crossflow)

Chapter Seven: Free-flow Turbulent Coalescers

Chapter Eight: Induced Gas Flotation Units (Mechanical/Hydraulic)

Chapter Nine: Sparger Units

Chapter Ten: Hydrocyclones

Chapter Eleven: Combination Units

Part Three: Information required for design

Part Four: Influent water quality

Part Five: Equipment selection and performance

Part Six: Filtration

Chapter Twelve: Solids removal principles

Chapter Thirteen: Water injection system treatment steps:

Part Seven: Solids removal equipment

Chapter Fourteen: Multimedia Filtration

Chapter Fifteen:Deep-bed Upflow Filters

Chapter Sixteen: Deep-bed Downflow Filters

Chapter Seventeen: Deep-bed Nutshell Filters

Customer Reviews

Average Review:

Post to your social network

     

Most Helpful Customer Reviews

See all customer reviews