Silicon carbide thin film radiators and gallium antimonide photovoltaic device layers on ceramic substrates for solar-thermophotovoltaic application.

More About This Textbook

Overview

The global annual energy consumption is projected to rise from its current value of 13 Terawatt-years to about 30 Terawatt-years within the next 40 years. Growing concerns over global warming and diminishing supplies of petroleum have highlighted the need to reduce carbon emissions and employ non-fossil fuels. In contrast to current and past dependence on a single source of energy for virtually all the power generated in the US, future demands are likely to be met by a variety of energy production technologies. It is the feeling of many that the key to developing a reliable and renewable energy source lies with the sun. In fact, it has already been proven that if, one day, we could harness all the energy the sun provides, there will never be a need for fossil fuels. It is this understanding that sparked the interest for the research presented in this thesis. Unfortunately, current technologies only allow us to capture a small percent of the total energy provided by the sun and at a very high-cost. Increasing the amount of power generated from solar radiation will become increasingly important, but without this technology being affordable, it is practically useless. The focus of this research is on two key components of a relatively new photovoltaic technology namely, solar thermophotovoltaics (STPV). In the STPV concept, the solar radiation is concentrated onto a solid (intermediate radiator) that could be heated to higher temperature and which in turn will radiate infrared photons as a blackbody. The photons from the intermediate radiator are then captured and directly converted to electric power by semiconductor photovoltaic devices. The two goals of this research were: (a) to develop a low-cost thin film based SiC radiator and (b) to develop low-cost III-V semiconductor crystalline thin films suitable for photovoltaic devices.;For low-cost radiators, we have successfully developed processes for the growth of silicon carbide (SiC) thin films by the atmospheric pressure chemical vapor deposition (APCVD) technique using Dimethylisopropylsilane (C5H8Si), 1,1, Dimethyl 1-silacyclopentane (C6 H14Si2), and 1,1,3,3-Tetramethyl 1,3-disilacyclobutane (C10H24 O4Si2) as single source monomolecular polymeric precursors. By using growth temperatures between 700 and 950°C and dilution ratios of precursor to hydrogen (carrier gas) between 1:0 (no dilution) and 1:100, optimum conditions could be identified for each precursor chemical that resulted in crystalline SiC films on a variety of substrates such as ceramic SiC, Si, GaAs, and quartz. As-grown films were evaluated for their chemical composition, crystalline quality, and surface morphology using Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM), respectively. SiC films deposited under different conditions were heated to high temperatures to study the blackbody emissive nature. The emission characteristics of the films were found to be similar to bulk SiC.;For low-cost photovoltaic device grade material, we have developed a process for growing thin film GaSb layers on low-cost SiC and AlN ceramic substrates. High-temperature melt epitaxy process has been used to re-crystallize GaSb continuous thin films on SiC and AlN ceramic-grade substrates from pre-synthesized GaSb pellets. Hydrogen ambient has been found to be the most suitable for obtaining highest quality films at 710°C which is the melting point/growth temperature of GaSb. The chemical treatment of GaSb prior to growth for eliminating thick surface oxide layers has been found to be crucial for sticking of the films on the ceramic substrates. The as-grown films show natural surface texturing (pyramidal microtextures) which is beneficial for increasing the probability of photon absorption from the incident radiation.;Future research on stacking of thin film photovoltaic material grown using melt epitaxy with the thin film radiator could lead to high efficiency STPV systems that are inexpensive to produce in large scale. This will lead to wide-spread solar energy utilization for electricity generation.
Read More Show Less

Product Details

  • BN ID: 2940032290223
  • Publisher: ProQuest LLC
  • Sold by: Barnes & Noble
  • Format: eTextbook
  • Pages: 186

Customer Reviews

Be the first to write a review
( 0 )
Rating Distribution

5 Star

(0)

4 Star

(0)

3 Star

(0)

2 Star

(0)

1 Star

(0)

Your Rating:

Your Name: Create a Pen Name or

Barnes & Noble.com Review Rules

Our reader reviews allow you to share your comments on titles you liked, or didn't, with others. By submitting an online review, you are representing to Barnes & Noble.com that all information contained in your review is original and accurate in all respects, and that the submission of such content by you and the posting of such content by Barnes & Noble.com does not and will not violate the rights of any third party. Please follow the rules below to help ensure that your review can be posted.

Reviews by Our Customers Under the Age of 13

We highly value and respect everyone's opinion concerning the titles we offer. However, we cannot allow persons under the age of 13 to have accounts at BN.com or to post customer reviews. Please see our Terms of Use for more details.

What to exclude from your review:

Please do not write about reviews, commentary, or information posted on the product page. If you see any errors in the information on the product page, please send us an email.

Reviews should not contain any of the following:

  • - HTML tags, profanity, obscenities, vulgarities, or comments that defame anyone
  • - Time-sensitive information such as tour dates, signings, lectures, etc.
  • - Single-word reviews. Other people will read your review to discover why you liked or didn't like the title. Be descriptive.
  • - Comments focusing on the author or that may ruin the ending for others
  • - Phone numbers, addresses, URLs
  • - Pricing and availability information or alternative ordering information
  • - Advertisements or commercial solicitation

Reminder:

  • - By submitting a review, you grant to Barnes & Noble.com and its sublicensees the royalty-free, perpetual, irrevocable right and license to use the review in accordance with the Barnes & Noble.com Terms of Use.
  • - Barnes & Noble.com reserves the right not to post any review -- particularly those that do not follow the terms and conditions of these Rules. Barnes & Noble.com also reserves the right to remove any review at any time without notice.
  • - See Terms of Use for other conditions and disclaimers.
Search for Products You'd Like to Recommend

Recommend other products that relate to your review. Just search for them below and share!

Create a Pen Name

Your Pen Name is your unique identity on BN.com. It will appear on the reviews you write and other website activities. Your Pen Name cannot be edited, changed or deleted once submitted.

 
Your Pen Name can be any combination of alphanumeric characters (plus - and _), and must be at least two characters long.

Continue Anonymously

    If you find inappropriate content, please report it to Barnes & Noble
    Why is this product inappropriate?
    Comments (optional)