Statics and Strength of Materials / Edition 2

Hardcover (Print)
Used and New from Other Sellers
Used and New from Other Sellers
from $1.99
Usually ships in 1-2 business days
(Save 96%)
Other sellers (Hardcover)
  • All (3) from $1.99   
  • Used (3) from $1.99   
Close
Sort by
Page 1 of 1
Showing All
Note: Marketplace items are not eligible for any BN.com coupons and promotions
$1.99
Seller since 2006

Feedback rating:

(59925)

Condition:

New — never opened or used in original packaging.

Like New — packaging may have been opened. A "Like New" item is suitable to give as a gift.

Very Good — may have minor signs of wear on packaging but item works perfectly and has no damage.

Good — item is in good condition but packaging may have signs of shelf wear/aging or torn packaging. All specific defects should be noted in the Comments section associated with each item.

Acceptable — item is in working order but may show signs of wear such as scratches or torn packaging. All specific defects should be noted in the Comments section associated with each item.

Used — An item that has been opened and may show signs of wear. All specific defects should be noted in the Comments section associated with each item.

Refurbished — A used item that has been renewed or updated and verified to be in proper working condition. Not necessarily completed by the original manufacturer.

Very Good
Great condition for a used book! Minimal wear. 100% Money Back Guarantee. Shipped to over one million happy customers. Your purchase benefits world literacy!

Ships from: Mishawaka, IN

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$1.99
Seller since 2006

Feedback rating:

(59925)

Condition: Good
Shows some signs of wear, and may have some markings on the inside. 100% Money Back Guarantee. Shipped to over one million happy customers. Your purchase benefits world literacy!

Ships from: Mishawaka, IN

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$1.99
Seller since 2010

Feedback rating:

(3867)

Condition: Good
Book has a small amount of wear visible on the binding, cover, pages. Selection as wide as the Mississippi.

Ships from: St Louis, MO

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
Page 1 of 1
Showing All
Close
Sort by

Overview

The new edition also includes:

  • A list of objectives at the beginning of each chapter to help students identify the specific skills they should acquire from the material covered;
  • More than 200 worked examples, and over 900 practice problems in varying degrees of difficulty;
  • An extensive list of professional organizations (including address, phone number, and website) for specific information on material properties and recommended practices related to manufacturing or construction;
  • New material on the use of mathematical technology (BASIC programs and graphing calculators) to solve simultaneous equations;
  • A new section that details the use of computer spreadsheets in determining beam deflections
Read More Show Less

Editorial Reviews

Booknews
Intended for engineering technology and architecture students, this text introduces the topics of statics and strength of materials at an elementary level. New sections requiring calculus have been added, covering centoids, moments of inertia of plane areas, and deflection of beams by integration. Other topics include linear equations and determinants, the equilibrium of noncurrent forces in space, and strain and stress concentrations around holes, notches and fillets. Also provides information of Saint-Venant's principal and repeated loading and fatigue. Annotation c. by Book News, Inc., Portland, Or.
Read More Show Less

Product Details

  • ISBN-13: 9780138458355
  • Publisher: Prentice Hall Professional Technical Reference
  • Publication date: 1/28/1993
  • Edition description: Older Edition
  • Edition number: 2
  • Pages: 640

Read an Excerpt

PREFACE:

Preface

The objective of this fourth edition is to cover statics and strength of materials at an elementary level, not requiring calculus. However, for instructors who use the text to teach in accredited programs in the technologies, sections requiring calculus are included. Those sections relate to centroids and moments of inertia of plane areas and deflection of beams by integration. Marked with an asterisk, this material can be omitted without a loss of continuity.

Statics and Strength of Materials is written for students enrolled in the industrial technology or engineering technology curriculum, and in university-level courses for nonengineering majors, such as architecture. It is also useful for self-study and can serve as a reference for courses in materials, materials testing, machine design, and structural design.

Several new features appear in this edition, including a list of objectives at the beginning of each chapter to help students identify specific skills they should acquire from the material covered. Appropriate chapter sections include a comprehensive roster of professional organizations (including addresses, telephone numbers, and Web sites) for professors and students who want more information on material properties or recommended practices related to manufacturing and construction. Other sections include procedures for using mathematical technology (graphing calculators, BASIC programs, and software spreadsheets) to facilitate calculations involved in solving simultaneous equations and determining beam deflections.

Aside from this additional material, the general plan of the book is unchanged. Carehas been taken to present the various topics with clarity in a simple and direct fashion and to avoid information overload. To that end, more than 200 examples illustrate the principles involved.

Chapters 1 through 9 provide coverage of statics, while strength of materials is covered in Chapters 10 through 18. The chapters on statics begin with a review of basic mathematics. The graphical method, together with trigonometric formulas and the component method, are employed to solve concurrent force problems. A discussion of the resultant and equilibrium of nonconcurrent forces follows, with special emphasis on the theorem of moments. Then the force analysis of structures and machines and concurrent and nonconcurrent force systems in space is presented. The chapters on statics conclude with friction, centers of gravity, centroids, and moment of inertia of areas. The chapters on strength of materials begin with the study of stress and strain in axially loaded members. This is followed by discussions of shear stresses and strains in torsion members, bending and deflection of beams, combined stress using Mohr's circle, columns, and structural connections.

The text includes more than 900 problems at various levels of difficulty for the student. Both the U.S. customary system of units and the international system of units (SI) are introduced and applied equally in the problems and examples.

The majority of material in this book was originally written by H. W. Morrow, who prepared two preliminary editions for use at Nassau (NY) Community College from 1976 to 1979. These were followed by three editions published in 1981, 1993, and 1998 by Prentice Hall. This fourth edition represents a joint collaboration between Mr. Morrow and R. P Kokernak of Fitchburg (MA) State College.

We would like to thank the following individuals for the information and help they provided for various sections of the fourth edition: Doug Burgin of the Southern Forest Products Association; John Duffy at RANOR Corporation; and Dr. James Kokernak of Rensselaer Polytechnic Institute. Special thanks to Steve Helba, Editor-in-Chief of the Technology Division at Prentice Hall, without whose direction this edition would not have been possible, and to Associate Editor Michelle Churma, who guided the project through to completion.

We would also like to acknowledge the reviewers of this text: Dr. J. G. Huber, Indiana State University, and Martin E. Gordon, Rochester Institute of Technology.

Users of the text are encouraged to write the authors with suggestions for improvements in future editions. Such material may be sent via e-mail to rkokernak@fsc.edu, or mailed directly to this address: Robert P Kokernak, Department of Industrial Technology, Fitchburg State College, 160 Pearl Street, Fitchburg, MA 01420.

H. W. Morrow
Ft. Lauderdale, FL

R. P. Kokernak
Ashburnham, MA

Read More Show Less

Table of Contents

Preface
Ch. 1 Basic Concepts 1
Ch. 2 Resultant of Concurrent Forces in a Plane 28
Ch. 3 Equilibrium of Concurrent Forces in a Plane 50
Ch. 4 Resultant of Nonconcurrent Forces in a Plane 68
Ch. 5 Equilibrium of a Rigid Body 94
Ch. 6 Force Analysis of Structures and Machines 119
Ch. 7 Forces in Space 163
Ch. 8 Friction 195
Ch. 9 Center of Gravity, Centroids, and Moments of Inertia of Areas 222
Ch. 10 Internal Reactions; Stress for Axial Loads 271
Ch. 11 Strain for Axial Loads: Hooke's Law 308
Ch. 12 Shear Stresses and Strains; Torsion 340
Ch. 13 Shear Forces and Bending Moments in Beams 366
Ch. 14 Bending and Shearing Stresses in Beams 399
Ch. 15 Deflection of Beams Due to Bending 450
Ch. 16 Combined Stresses and Mohr's Circle 513
Ch. 17 Columns 558
Ch. 18 Bolted, Riveted, and Welded Structural Connections 578
Appendix 599
Answers to Even-Numbered Problems 629
Index 639
Read More Show Less

Preface

PREFACE:

Preface

The objective of this fourth edition is to cover statics and strength of materials at an elementary level, not requiring calculus. However, for instructors who use the text to teach in accredited programs in the technologies, sections requiring calculus are included. Those sections relate to centroids and moments of inertia of plane areas and deflection of beams by integration. Marked with an asterisk, this material can be omitted without a loss of continuity.

Statics and Strength of Materials is written for students enrolled in the industrial technology or engineering technology curriculum, and in university-level courses for nonengineering majors, such as architecture. It is also useful for self-study and can serve as a reference for courses in materials, materials testing, machine design, and structural design.

Several new features appear in this edition, including a list of objectives at the beginning of each chapter to help students identify specific skills they should acquire from the material covered. Appropriate chapter sections include a comprehensive roster of professional organizations (including addresses, telephone numbers, and Web sites) for professors and students who want more information on material properties or recommended practices related to manufacturing and construction. Other sections include procedures for using mathematical technology (graphing calculators, BASIC programs, and software spreadsheets) to facilitate calculations involved in solving simultaneous equations and determining beam deflections.

Aside from this additional material, the general plan of the book is unchanged.Carehas been taken to present the various topics with clarity in a simple and direct fashion and to avoid information overload. To that end, more than 200 examples illustrate the principles involved.

Chapters 1 through 9 provide coverage of statics, while strength of materials is covered in Chapters 10 through 18. The chapters on statics begin with a review of basic mathematics. The graphical method, together with trigonometric formulas and the component method, are employed to solve concurrent force problems. A discussion of the resultant and equilibrium of nonconcurrent forces follows, with special emphasis on the theorem of moments. Then the force analysis of structures and machines and concurrent and nonconcurrent force systems in space is presented. The chapters on statics conclude with friction, centers of gravity, centroids, and moment of inertia of areas. The chapters on strength of materials begin with the study of stress and strain in axially loaded members. This is followed by discussions of shear stresses and strains in torsion members, bending and deflection of beams, combined stress using Mohr's circle, columns, and structural connections.

The text includes more than 900 problems at various levels of difficulty for the student. Both the U.S. customary system of units and the international system of units (SI) are introduced and applied equally in the problems and examples.

The majority of material in this book was originally written by H. W. Morrow, who prepared two preliminary editions for use at Nassau (NY) Community College from 1976 to 1979. These were followed by three editions published in 1981, 1993, and 1998 by Prentice Hall. This fourth edition represents a joint collaboration between Mr. Morrow and R. P Kokernak of Fitchburg (MA) State College.

We would like to thank the following individuals for the information and help they provided for various sections of the fourth edition: Doug Burgin of the Southern Forest Products Association; John Duffy at RANOR Corporation; and Dr. James Kokernak of Rensselaer Polytechnic Institute. Special thanks to Steve Helba, Editor-in-Chief of the Technology Division at Prentice Hall, without whose direction this edition would not have been possible, and to Associate Editor Michelle Churma, who guided the project through to completion.

We would also like to acknowledge the reviewers of this text: Dr. J. G. Huber, Indiana State University, and Martin E. Gordon, Rochester Institute of Technology.

Users of the text are encouraged to write the authors with suggestions for improvements in future editions. Such material may be sent via e-mail to rkokernak@fsc.edu, or mailed directly to this address: Robert P Kokernak, Department of Industrial Technology, Fitchburg State College, 160 Pearl Street, Fitchburg, MA 01420.

H. W. Morrow
Ft. Lauderdale, FL

R. P. Kokernak
Ashburnham, MA

Read More Show Less

Customer Reviews

Be the first to write a review
( 0 )
Rating Distribution

5 Star

(0)

4 Star

(0)

3 Star

(0)

2 Star

(0)

1 Star

(0)

Your Rating:

Your Name: Create a Pen Name or

Barnes & Noble.com Review Rules

Our reader reviews allow you to share your comments on titles you liked, or didn't, with others. By submitting an online review, you are representing to Barnes & Noble.com that all information contained in your review is original and accurate in all respects, and that the submission of such content by you and the posting of such content by Barnes & Noble.com does not and will not violate the rights of any third party. Please follow the rules below to help ensure that your review can be posted.

Reviews by Our Customers Under the Age of 13

We highly value and respect everyone's opinion concerning the titles we offer. However, we cannot allow persons under the age of 13 to have accounts at BN.com or to post customer reviews. Please see our Terms of Use for more details.

What to exclude from your review:

Please do not write about reviews, commentary, or information posted on the product page. If you see any errors in the information on the product page, please send us an email.

Reviews should not contain any of the following:

  • - HTML tags, profanity, obscenities, vulgarities, or comments that defame anyone
  • - Time-sensitive information such as tour dates, signings, lectures, etc.
  • - Single-word reviews. Other people will read your review to discover why you liked or didn't like the title. Be descriptive.
  • - Comments focusing on the author or that may ruin the ending for others
  • - Phone numbers, addresses, URLs
  • - Pricing and availability information or alternative ordering information
  • - Advertisements or commercial solicitation

Reminder:

  • - By submitting a review, you grant to Barnes & Noble.com and its sublicensees the royalty-free, perpetual, irrevocable right and license to use the review in accordance with the Barnes & Noble.com Terms of Use.
  • - Barnes & Noble.com reserves the right not to post any review -- particularly those that do not follow the terms and conditions of these Rules. Barnes & Noble.com also reserves the right to remove any review at any time without notice.
  • - See Terms of Use for other conditions and disclaimers.
Search for Products You'd Like to Recommend

Recommend other products that relate to your review. Just search for them below and share!

Create a Pen Name

Your Pen Name is your unique identity on BN.com. It will appear on the reviews you write and other website activities. Your Pen Name cannot be edited, changed or deleted once submitted.

 
Your Pen Name can be any combination of alphanumeric characters (plus - and _), and must be at least two characters long.

Continue Anonymously

    If you find inappropriate content, please report it to Barnes & Noble
    Why is this product inappropriate?
    Comments (optional)