Table Saw: The Tool Information You Need at Your Fingertips

Overview

When you unpack a new table saw-whether it's a bench top, contractor or cabinet saw-the enclosed manual doesn't venture much beyond basic safety, assembly, and set-up. That leaves some head-scratching when it's time to turn it on and start cutting. Where's the manual that covers all the things your new table saw is designed to do?

The Missing Shop Manual-Table Saw takes that next step with you. In addition to explaining the basics of safety and set-up, this handy reference will ...

See more details below
Available through our Marketplace sellers.
Other sellers (Paperback)
  • All (16) from $1.99   
  • New (5) from $6.61   
  • Used (11) from $1.99   
Close
Sort by
Page 1 of 1
Showing 1 – 4 of 5
Note: Marketplace items are not eligible for any BN.com coupons and promotions
$6.61
Seller since 2009

Feedback rating:

(2619)

Condition:

New — never opened or used in original packaging.

Like New — packaging may have been opened. A "Like New" item is suitable to give as a gift.

Very Good — may have minor signs of wear on packaging but item works perfectly and has no damage.

Good — item is in good condition but packaging may have signs of shelf wear/aging or torn packaging. All specific defects should be noted in the Comments section associated with each item.

Acceptable — item is in working order but may show signs of wear such as scratches or torn packaging. All specific defects should be noted in the Comments section associated with each item.

Used — An item that has been opened and may show signs of wear. All specific defects should be noted in the Comments section associated with each item.

Refurbished — A used item that has been renewed or updated and verified to be in proper working condition. Not necessarily completed by the original manufacturer.

New
2010-04-01 Paperback New 1565234715 Ships Within 24 Hours. Tracking Number available for all USA orders. Excellent Customer Service. Upto 15 Days 100% Money Back Gurantee. Try ... Our Fast! ! ! ! Shipping With Tracking Number. Read more Show Less

Ships from: Bensalem, PA

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$26.32
Seller since 2014

Feedback rating:

(338)

Condition: New
PAPERBACK New 1565234715 XCITING PRICES JUST FOR YOU. Ships within 24 hours. Best customer service. 100% money back return policy.

Ships from: Bensalem, PA

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$26.32
Seller since 2015

Feedback rating:

(517)

Condition: New
PAPERBACK New 1565234715! ! KNOWLEDGE IS POWER! ! ENJOY OUR BEST PRICES! ! ! Ships Fast. All standard orders delivered within 5 to 12 business days.

Ships from: Southampton, PA

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$31.38
Seller since 2010

Feedback rating:

(801)

Condition: New
PAPERBACK New 1565234715! ! ! ! BEST PRICES WITH A SERVICE YOU CAN RELY! ! !

Ships from: Philadelphia, PA

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
Page 1 of 1
Showing 1 – 4 of 5
Close
Sort by
Table Saw (Missing Shop Manual): The Tool Information You Need at Your Fingertips

Available on NOOK devices and apps  
  • NOOK Devices
  • Samsung Galaxy Tab 4 NOOK 7.0
  • Samsung Galaxy Tab 4 NOOK 10.1
  • NOOK HD Tablet
  • NOOK HD+ Tablet
  • NOOK eReaders
  • NOOK Color
  • NOOK Tablet
  • Tablet/Phone
  • NOOK for Windows 8 Tablet
  • NOOK for iOS
  • NOOK for Android
  • NOOK Kids for iPad
  • PC/Mac
  • NOOK for Windows 8
  • NOOK for PC
  • NOOK for Mac

Want a NOOK? Explore Now

NOOK Book (eBook)
$10.49
BN.com price
(Save 18%)$12.95 List Price

Overview

When you unpack a new table saw-whether it's a bench top, contractor or cabinet saw-the enclosed manual doesn't venture much beyond basic safety, assembly, and set-up. That leaves some head-scratching when it's time to turn it on and start cutting. Where's the manual that covers all the things your new table saw is designed to do?

The Missing Shop Manual-Table Saw takes that next step with you. In addition to explaining the basics of safety and set-up, this handy reference will help you get the most for your money by getting the most from your equipment. From cutting dados and molding to creating jigs, you'll discover the techniques and tips you need to maximize your table saw's performance. Even if you've been woodworking for years, you'll wish this was the manual that originally came with your new table saw.

Read More Show Less

Editorial Reviews

From the Publisher
I love woodworking. I'm not great at it - I figure it'll take me another 15+ years to hit that magic 10,000 hour mark in the shop to reach an expert's level of craftsmanship. But in the meantime, I try to always have something going on in the shop that either allows me to learn a new skill or get a bit more practice with an older one. Right now, I'm enjoying learning how to properly use my router table. I know how to use a router as a stand-alone device, but the table is going to allow me to branch out and really do some interesting stuff. But mounting the router underneath the table brought with it some questions that required me to dig out the router manual a big white heap of pages that answered my question but not with a lot of enjoyment.

I've done this in the past, breaking out my stack of manuals to remind myself how to tune my table saw or replace the blade correctly in my band saw. The operator manuals that come with tools are definitely useful, but they have one glaringly obvious drawback - the manual will tell you how to properly and safely operate a tool, but it won't tell you how to really use it. You won't get the advice that a pro can offer when you're first getting your feet wet with a new tool (well, unless you have access to a few pros). This is exactly the situation I found myself in when I first purchased my circular saw, my table saw, my band saw, and my router.

I tell you all this so you'll understand (and not poke too much fun at me) why I grabbed the box from the UPS guy and beat a path to my man cave to tear into the care package sent to me from Fox Chapel Publishing. They've got books on a lot of different subjects from Mennonite Cookbooks to Sewing to Winemaking to Woodburning. But it's their woodworking titles that make me drool, with subjects ranging from furniture making to pinewood derby cars. Tucked in the box were ten little books I've been itching to read and review, and I've just completed the entire set after just a little over a week. If that sounds like a lot of reading in a short time, rest assured that these ten little books are short, easy to read, and sure to be of interest to anyone who has stared at a power tool and wondered how to operate it, how to maintain it, and ultimately how best to use it.

The series is called The Missing Shop Manual, and while I certainly hope the library continues to grow, you'll likely find at least one of the books that matches a tool in your shop maybe more. The series claims you'll wish this was the manual that originally came with your insert-tool-name-here.

I can't speak for all ten books as I've not yet got a jointer, shaper, or lathe (my wife is grimacing right now as she realizes I don't yet have all the tools I really want), but I can tell you that the claim holds true for my band saw (2-page manual, I kid you not), my router (a bit better manual, but no actual usage examples), and my drill press (a little better with a 3-page manual but half of it was warnings and troubleshooting steps).

I'll go ahead and say it - I wasn't really certain how much these little books (most of them averaging less than 150 pages) were going to really help me when I started reading. But after completing the Router and Table Saw books, I couldn't stop smiling. I had already picked up on some of the advice in these books, but there was new stuff in there (to me). Stuff I know I would likely never have figured out without someone with experience telling me. But since I typically work alone and am of the I'll-figure-it-out-on-my-own mentality, I tend to make mistakes often. That's how I learn, I guess.

But let's take the Band Saw book, for example. I thought using a band saw was pretty straight forward. I knew how to operate it, how to tighten the blade, and how to do a few tricky cuts. But I never thought to check the blade wheel alignment. I guess the manufacturer just figured it would be perfect from the factory. (Wrong.) This little book even showed me how to test for (and fix) an out-of-round blade wheel. There was zero mention of this in the manufacturer's manual fortunately my blade wheels were round but the alignment was a bit off. I fixed it per the book's instructions and did a test cut on a piece of hardwood that had been giving me trouble. Immediate improvement that I could tell just by feel.

I can go on with more examples. The Circular Saws and Jig Saws book (two tools in one book) gave me a much better understanding of two of the tools I use most in my shop. Again, I thought I knew all there was to using these tools, but the little manual proved otherwise by offering me some tips on how to make specific types of cuts with these (at times) not so accurate cutting tools, especially the jig saw.

The Table Saw book I read twice. I honestly could not believe how little I knew about the maintenance and operation of one of the most expensive tools in my shop. I mean, seriously - how hard would it be for tool manufacturers to provide some DVDs and mini-projects to help us learn how to use our new tools better? Thankfully, it's never too late to learn and I can point to the Table Saw book as a prime example of where The Missing Shop Manual is a worthy investment.

I started reading the Glue and Clamps book as I was waiting for my wife to get ready to go shopping - she gave me the funniest look when I put a bookmark in and took it with me. Yes, I actually enjoyed reading about gluing and clamping techniques while sitting and waiting for her to finish her shopping. I even had one guy pass by me, give me a strange look, and then ask me if the book was any good! I've never done any drawer assembly, but now I know what to buy (and why) should I ever try to put together a box.

All of the books contain a mixture of color photographs and color line drawings to demonstrate techniques or concepts. They're also, as I said earlier, short and sweet. You can typically read an entire book in less than 45 minutes or, in the case of the Jointer book's 77 pages, about 20 minutes. The books range in price from $9.95 to $12.95, with the exception being the Bench Planes book that comes with a 55-minute DVD showing techniques and proper usage.

After reading all ten books, I'm thinking I'd really like a lathe. The Lathe book was fun to read, even though I don't own one. I know what's involved (to a point), so it was interesting to read a detailed overview of how the tool works, how the various cutting tools are used, and some of the interesting things I can do with it.

The Missing Shop Manual series is well done. Most of us who enjoy woodworking are not professional woodworkers, so it's nice to have little books like this available to help refresh our memory on operation, cleaning, tuning, and proper usage. I know I'm guilty of getting lazy here and there and operating a tool improperly, so I think I'm going to make myself a promise to review these books once a year to keep me on my toes and keep my tools in proper working order. Take a look at your own tools and find the one that gives you the most trouble or the one that you tend to take for granted that you know everything there is to know about it. Pick up a copy of the matching Missing Shop Manual and give it a read - I'll be curious to know what you think.

The ten books in the series include:

Jointer

Lathe

Shaper

Glue and Clamps

Band Saw

Circular Saws and Jig Saws

Router

Table Saw

Drills and Drill Presses

Bench Planes

Part of a new series, these small manuals feature clear, useful color drawings as well as photographs. The books are straight forward and focus on the basics-projects are not included. Each saw is dissected to show variations and the components, then blades, maintenance, and accessories are covered. These bare-bones guides are well done and recommended for libraries needing to stretch their dollars.

The Table Saw is perhaps the most used tool in your shop and the Skills Institute Press book devotes 142 pages of excellent information to it. The book illustrates the three basic tools, the bench top, the contractors and the cabinet saw. You are shown how to correctly align the saw for perfect rip and cross cuts, you are shown how to precisely set your miter gauge and how to maintain your saw table top. Routine maintenance is covered as well. There is a long list of time saving jigs with illustrations to save you time and effort on the table saw.

From the Publisher
Each book in The Missing Shop Manual series provides information so you can get the most out of your machines/tools. The “manuals” include set-up and safety advice and go on to cover basic operation and technique information. For example, the Tablesaw manual includes sections on ripping and crosscutting, cutting dados, rabbets and grooves, and has a chapter all about jigs. The books are filled with drawings and photos and come bound with durable covers so they can be used often in the shop. - Fine Woodworking.com
Library Journal
Part of a new series, these small manuals feature clear, useful color drawings as well as photographs. The books are straightforward and focus on the basics—projects are not included. Each saw is dissected to show variations and the components, then blades, maintenance, and accessories are covered. These bare-bones guides are well done and recommended for libraries needing to stretch their dollars. [See Drills and Drill Presses, below; the series also includes Glue and Clamps and Lathe.—Ed.]
Read More Show Less

Product Details

  • ISBN-13: 9781565234710
  • Publisher: Fox Chapel Publishing Company, Incorporated
  • Publication date: 4/1/2010
  • Series: Missing Shop Manual Series
  • Pages: 143
  • Product dimensions: 4.90 (w) x 6.90 (h) x 0.40 (d)

Meet the Author

John Kelsey is a journalist and editor specializing in woodworking and furniture making. He has a degree in woodworking and furniture design from the School for American Craft at the Rochester Institute of Technology. He is a former editor in chief of Fine Woodworking magazine and a publisher of woodworking and home building books at the Taunton Press. He is the author of Furniture Projects for the Deck and Lawn. He lives in Newtown, Connecticut.

Read More Show Less

Customer Reviews

Be the first to write a review
( 0 )
Rating Distribution

5 Star

(0)

4 Star

(0)

3 Star

(0)

2 Star

(0)

1 Star

(0)

Your Rating:

Your Name: Create a Pen Name or

Barnes & Noble.com Review Rules

Our reader reviews allow you to share your comments on titles you liked, or didn't, with others. By submitting an online review, you are representing to Barnes & Noble.com that all information contained in your review is original and accurate in all respects, and that the submission of such content by you and the posting of such content by Barnes & Noble.com does not and will not violate the rights of any third party. Please follow the rules below to help ensure that your review can be posted.

Reviews by Our Customers Under the Age of 13

We highly value and respect everyone's opinion concerning the titles we offer. However, we cannot allow persons under the age of 13 to have accounts at BN.com or to post customer reviews. Please see our Terms of Use for more details.

What to exclude from your review:

Please do not write about reviews, commentary, or information posted on the product page. If you see any errors in the information on the product page, please send us an email.

Reviews should not contain any of the following:

  • - HTML tags, profanity, obscenities, vulgarities, or comments that defame anyone
  • - Time-sensitive information such as tour dates, signings, lectures, etc.
  • - Single-word reviews. Other people will read your review to discover why you liked or didn't like the title. Be descriptive.
  • - Comments focusing on the author or that may ruin the ending for others
  • - Phone numbers, addresses, URLs
  • - Pricing and availability information or alternative ordering information
  • - Advertisements or commercial solicitation

Reminder:

  • - By submitting a review, you grant to Barnes & Noble.com and its sublicensees the royalty-free, perpetual, irrevocable right and license to use the review in accordance with the Barnes & Noble.com Terms of Use.
  • - Barnes & Noble.com reserves the right not to post any review -- particularly those that do not follow the terms and conditions of these Rules. Barnes & Noble.com also reserves the right to remove any review at any time without notice.
  • - See Terms of Use for other conditions and disclaimers.
Search for Products You'd Like to Recommend

Recommend other products that relate to your review. Just search for them below and share!

Create a Pen Name

Your Pen Name is your unique identity on BN.com. It will appear on the reviews you write and other website activities. Your Pen Name cannot be edited, changed or deleted once submitted.

 
Your Pen Name can be any combination of alphanumeric characters (plus - and _), and must be at least two characters long.

Continue Anonymously

    If you find inappropriate content, please report it to Barnes & Noble
    Why is this product inappropriate?
    Comments (optional)