BN.com Gift Guide

Technical Drawing / Edition 9

Hardcover (Print)
Used and New from Other Sellers
Used and New from Other Sellers
from $1.99
Usually ships in 1-2 business days
(Save 96%)
Other sellers (Hardcover)
  • All (32) from $1.99   
  • Used (32) from $1.99   
Close
Sort by
Page 1 of 4
Showing 1 – 9 of 32 (4 pages)
Note: Marketplace items are not eligible for any BN.com coupons and promotions
$1.99
Seller since 2009

Feedback rating:

(23972)

Condition:

New — never opened or used in original packaging.

Like New — packaging may have been opened. A "Like New" item is suitable to give as a gift.

Very Good — may have minor signs of wear on packaging but item works perfectly and has no damage.

Good — item is in good condition but packaging may have signs of shelf wear/aging or torn packaging. All specific defects should be noted in the Comments section associated with each item.

Acceptable — item is in working order but may show signs of wear such as scratches or torn packaging. All specific defects should be noted in the Comments section associated with each item.

Used — An item that has been opened and may show signs of wear. All specific defects should be noted in the Comments section associated with each item.

Refurbished — A used item that has been renewed or updated and verified to be in proper working condition. Not necessarily completed by the original manufacturer.

Acceptable
Our feedback rating says it all: Five star service and fast delivery! We have shipped four million items to happy customers, and have one MILLION unique items ready to ship today!

Ships from: Toledo, OH

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$1.99
Seller since 2014

Feedback rating:

(16)

Condition: Acceptable
BOOK COVER MAY VARY FROM STOCK PHOTO Used - Acceptable

Ships from: CLARKSVILLE, IN

Usually ships in 1-2 business days

  • Standard, 48 States
$1.99
Seller since 2009

Feedback rating:

(23972)

Condition: Good
Our feedback rating says it all: Five star service and fast delivery! We have shipped four million items to happy customers, and have one MILLION unique items ready to ship today!

Ships from: Toledo, OH

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$1.99
Seller since 2006

Feedback rating:

(60921)

Condition: Acceptable
Shows definite wear, and perhaps considerable marking on inside. 100% Money Back Guarantee. Shipped to over one million happy customers. Your purchase benefits world literacy!

Ships from: Mishawaka, IN

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$1.99
Seller since 2006

Feedback rating:

(60921)

Condition: Good
Shows some signs of wear, and may have some markings on the inside. 100% Money Back Guarantee. Shipped to over one million happy customers. Your purchase benefits world literacy!

Ships from: Mishawaka, IN

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$2.00
Seller since 2014

Feedback rating:

(90)

Condition: Acceptable
Acceptable BOOK COVER MAY VARY FROM STOCK PHOTO Used-Acceptable.

Ships from: Clarksville, IN

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$2.02
Seller since 2008

Feedback rating:

(16228)

Condition: Very Good
Macmillan Coll Div, 01/01/1991, Hardcover, Very Good condition. Owner's name inside. 9th ed.

Ships from: Frederick, MD

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$2.05
Seller since 2009

Feedback rating:

(7748)

Condition: Good
Light shelving wear with minimal damage to cover and bindings. Pages show minor use. Help save a tree. Buy all your used books from Green Earth Books. Read. Recycle and Reuse.

Ships from: Portland, OR

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
$2.05
Seller since 2009

Feedback rating:

(11076)

Condition: Acceptable
A tradition of southern quality and service. All books guaranteed at the Atlanta Book Company. Our mailers are 100% recyclable.

Ships from: Atlanta, GA

Usually ships in 1-2 business days

  • Canadian
  • International
  • Standard, 48 States
  • Standard (AK, HI)
  • Express, 48 States
  • Express (AK, HI)
Page 1 of 4
Showing 1 – 9 of 32 (4 pages)
Close
Sort by

Overview

This book's practical, well illustrated, step-by-step explanations of procedures have successfully trained users for 60 years, and continue to appeal to today's visually oriented users. This book offers the best coverage of basic graphics principles and an unmatched set of fully machinable working drawings. For professions that utilize the skills of engineering graphics/technical drawing and drafting/technical sketching.
Read More Show Less

Editorial Reviews

Booknews
New edition of a standard for 60 years, this text describes the practices and techniques of graphical communication. All aspects of technical drawing are described and pictured, from oblique projection and tolerancing to how to sharpen a pencil. Much attention is given to CAD, and all drawings are ANSI standard. Annotation c. by Book News, Inc., Portland, Or.
Booknews
The latest revision and updating (eighth edition, 1986) of a classic textbook first published in 1933, which contains a great number of problems on every phase of the subject and constitutes a complete teaching unit for use in college classes, technical schools, and industrial drafting and design departments. This edition reflects the increased use of computer technology for drafting, design work, and manufacturing processes. Annotation c. Book News, Inc., Portland, OR (booknews.com)
Read More Show Less

Product Details

  • ISBN-13: 9780023426056
  • Publisher: Prentice Hall Professional Technical Reference
  • Publication date: 1/1/1991
  • Edition description: Older Edition
  • Edition number: 9
  • Pages: 1056

Read an Excerpt

PREFACE:

Preface

ABOUT THIS BOOK

Over the last sixty years, Technical Drawing has taught well over a million students the practices and techniques of graphical communication. Both instructors and their students have come to depend on this text as the authority on the subject, and most students have used this book as a professional reference long after they have finished taking this course. Why has this book been so successful? First, the main goal of the text has always been to explain each principle so clearly that the student is certain to understand it, and to make the text interesting enough to encourage all students to read and study on their own. Second, this book has also had what are unquestionably the best, most detailed, and accurate set of drawings on the market. A student skilled with this book's drawings will have a full repertoire of graphical skills in his or her hands. Lastly, Technical Drawing continually has sought to address the new technologies and the skills that constantly change this field. By doing so, this text prepares students to enter the marketplace and face the challenges of a rapidly changing playing field.

THE ELEVENTH EDITION

The Eleventh Edition of Technical Drawing continues to offer the best coverage of basic graphics principles available. Edition after edition, this text serves as the authoritative source on the subject. With this new version, we have acted upon the requests of over 30 reviewers to improve certain aspects of the book while preserving its core presentation. In particular, this new volume features:

  • Greatly increased coverage of thedesign process in Chapter 14. This chapter now includes coverage of 3D solid modeling, and parametric or constraintbased modeling.
  • Thoroughly revised chapter on manufacturing processes. We especially thank Professor Serope Kalpakjian of the Illinois Institute of Technology and the author of Manufacturing Engineering and Technology for his assistance with this chapter.
  • Over 50 brand new questions /problems. These problems feature parts that come from a variety of industries.
  • Material on Instrumental Drawing and Lettering condensed to one chapter.
  • New coverage of Geometric Dimensioning and Tolerancing.
  • Extensive updating of text graphics to comply to most recent ANSI standards.
  • New "Graphics Spotlights" feature that highlights a particular use of graphics in industry.
  • A decrease in the overall size of the book. Instructors have told us that students are finding books too large. However, they want their students to have access to important reference material. To achieve both these goals, we have eliminated the chapters on Graphs and Diagrams and Alignment Charts included in the last edition, and included them in Adobe pdf format on a free CD. This CD also contains over 30 animations of graphics concepts.
  • Updated web site http//www.prenhall.com /giesecke now includes even more questions for review, as well as a new feature available for January of 2000 that lets professors create their own online syllabus. Using a simple interface, instructors build a graphic assignment list and use it to interact with their class over the web. This site also features links to other graphics related areas, a selection of animations available for class instruction or student review, an exploration of VRML technology, a case studies exploring how graphics communication is handled at an engineering company, and more. This site will be a constant resource to help instructors and students remain as current as possible.
  • Eight Page Color Insert. To give students a feel for how color is often used in CAD software and other technological processes, but without overloading and obscuring the book's core content, we have included an eightpage color insert.

SUPPLEMENTS

INSTRUCTOR'S MANUAL WITH SOLUTIONS/RESOURCE CD

This new manual prepared by Tom Kane of Pueblo Community College includes outlines, teaching tips, extra quiz questions, and other tools designed to aid in class preparation. In addition, this manual comes with a new CDROM containing answer files for over 450 Giesecke drawing problems. The problems are in both dwg and dwf form for easy electronic access and display. This CD also includes pdf files of all art in the text for quick integration in course web pages. Instructors have long asked for this supplement and we are happy to provide it with the new edition.

WORKBOOKS

Three workbooks with additional problems are available. These workbooks are fully class tested for effectiveness and relevance to the course. They range from having more traditional problems to more modern approaches.

  • Engineering Drawing, Problem Series 1 (ISBN 0136585361): Contains traditional, mechanical workbook problems.
  • Engineering Drawing, Problem Series 2 (ISBN 0136588816): Contains traditional problems with an emphasis on engineering concepts.
  • Engineering Drawing, Problem Series 3, New 2nd Edition (ISBN 0130259543): The new edition of a workbook by Paige Davis and Karen Juneau of the Louisiana State University. This book contains modern problems, as well as an extensive CAD based project, and comes with its own disk of starter CAD files.

WORLDWIDE WEB SITE — ...

Read More Show Less

Table of Contents

1 The Graphic Language and Design 1
2 Introduction to CAD 15
3 Instrumental Drawing 45
4 Lettering 89
5 Geometric Constructions 111
6 Sketching and Shape Description 153
7 Multiview Projection 185
8 Sectional Views 237
9 Auxiliary Views 267
10 Revolutions 295
11 Manufacturing Processes 313
12 Dimensioning 349
13 Tolerancing 387
14 Threads, Fasteners, and Springs 421
15 Design and Working Drawings 461
16 Reproduction and Control of Drawings 533
17 Axonometric Projection 545
18 Oblique Projection 581
19 Perspective 599
20 Intersections and Developments 625
21 Gearing and Cams 655
22 Electronic Diagrams 679
23 Structural Drawing 701
24 Topographic Drawing and Mapping 725
25 Piping Drawing 745
26 Welding Representation 763
27 Graphs and Diagrams 781
28 Alignment Charts 815
Appendix a1
Index i1
Read More Show Less

Preface

PREFACE:

Preface

ABOUT THIS BOOK

Over the last sixty years, Technical Drawing has taught well over a million students the practices and techniques of graphical communication. Both instructors and their students have come to depend on this text as the authority on the subject, and most students have used this book as a professional reference long after they have finished taking this course. Why has this book been so successful? First, the main goal of the text has always been to explain each principle so clearly that the student is certain to understand it, and to make the text interesting enough to encourage all students to read and study on their own. Second, this book has also had what are unquestionably the best, most detailed, and accurate set of drawings on the market. A student skilled with this book's drawings will have a full repertoire of graphical skills in his or her hands. Lastly, Technical Drawing continually has sought to address the new technologies and the skills that constantly change this field. By doing so, this text prepares students to enter the marketplace and face the challenges of a rapidly changing playing field.

THE ELEVENTH EDITION

The Eleventh Edition of Technical Drawing continues to offer the best coverage of basic graphics principles available. Edition after edition, this text serves as the authoritative source on the subject. With this new version, we have acted upon the requests of over 30 reviewers to improve certain aspects of the book while preserving its core presentation. In particular, this new volume features:

  • Greatly increased coverage ofthedesign process in Chapter 14. This chapter now includes coverage of 3D solid modeling, and parametric or constraintbased modeling.
  • Thoroughly revised chapter on manufacturing processes. We especially thank Professor Serope Kalpakjian of the Illinois Institute of Technology and the author of Manufacturing Engineering and Technology for his assistance with this chapter.
  • Over 50 brand new questions /problems. These problems feature parts that come from a variety of industries.
  • Material on Instrumental Drawing and Lettering condensed to one chapter.
  • New coverage of Geometric Dimensioning and Tolerancing.
  • Extensive updating of text graphics to comply to most recent ANSI standards.
  • New "Graphics Spotlights" feature that highlights a particular use of graphics in industry.
  • A decrease in the overall size of the book. Instructors have told us that students are finding books too large. However, they want their students to have access to important reference material. To achieve both these goals, we have eliminated the chapters on Graphs and Diagrams and Alignment Charts included in the last edition, and included them in Adobe pdf format on a free CD. This CD also contains over 30 animations of graphics concepts.
  • Updated web site http//www.prenhall.com /giesecke now includes even more questions for review, as well as a new feature available for January of 2000 that lets professors create their own online syllabus. Using a simple interface, instructors build a graphic assignment list and use it to interact with their class over the web. This site also features links to other graphics related areas, a selection of animations available for class instruction or student review, an exploration of VRML technology, a case studies exploring how graphics communication is handled at an engineering company, and more. This site will be a constant resource to help instructors and students remain as current as possible.
  • Eight Page Color Insert. To give students a feel for how color is often used in CAD software and other technological processes, but without overloading and obscuring the book's core content, we have included an eightpage color insert.

SUPPLEMENTS

INSTRUCTOR'S MANUAL WITH SOLUTIONS/RESOURCE CD

This new manual prepared by Tom Kane of Pueblo Community College includes outlines, teaching tips, extra quiz questions, and other tools designed to aid in class preparation. In addition, this manual comes with a new CDROM containing answer files for over 450 Giesecke drawing problems. The problems are in both dwg and dwf form for easy electronic access and display. This CD also includes pdf files of all art in the text for quick integration in course web pages. Instructors have long asked for this supplement and we are happy to provide it with the new edition.

WORKBOOKS

Three workbooks with additional problems are available. These workbooks are fully class tested for effectiveness and relevance to the course. They range from having more traditional problems to more modern approaches.

  • Engineering Drawing, Problem Series 1 (ISBN 0136585361): Contains traditional, mechanical workbook problems.
  • Engineering Drawing, Problem Series 2 (ISBN 0136588816): Contains traditional problems with an emphasis on engineering concepts.
  • Engineering Drawing, Problem Series 3, New 2nd Edition (ISBN 0130259543): The new edition of a workbook by Paige Davis and Karen Juneau of the Louisiana State University. This book contains modern problems, as well as an extensive CAD based project, and comes with its own disk of starter CAD files.

WORLDWIDE WEB SITE — ...

Read More Show Less

Customer Reviews

Be the first to write a review
( 0 )
Rating Distribution

5 Star

(0)

4 Star

(0)

3 Star

(0)

2 Star

(0)

1 Star

(0)

Your Rating:

Your Name: Create a Pen Name or

Barnes & Noble.com Review Rules

Our reader reviews allow you to share your comments on titles you liked, or didn't, with others. By submitting an online review, you are representing to Barnes & Noble.com that all information contained in your review is original and accurate in all respects, and that the submission of such content by you and the posting of such content by Barnes & Noble.com does not and will not violate the rights of any third party. Please follow the rules below to help ensure that your review can be posted.

Reviews by Our Customers Under the Age of 13

We highly value and respect everyone's opinion concerning the titles we offer. However, we cannot allow persons under the age of 13 to have accounts at BN.com or to post customer reviews. Please see our Terms of Use for more details.

What to exclude from your review:

Please do not write about reviews, commentary, or information posted on the product page. If you see any errors in the information on the product page, please send us an email.

Reviews should not contain any of the following:

  • - HTML tags, profanity, obscenities, vulgarities, or comments that defame anyone
  • - Time-sensitive information such as tour dates, signings, lectures, etc.
  • - Single-word reviews. Other people will read your review to discover why you liked or didn't like the title. Be descriptive.
  • - Comments focusing on the author or that may ruin the ending for others
  • - Phone numbers, addresses, URLs
  • - Pricing and availability information or alternative ordering information
  • - Advertisements or commercial solicitation

Reminder:

  • - By submitting a review, you grant to Barnes & Noble.com and its sublicensees the royalty-free, perpetual, irrevocable right and license to use the review in accordance with the Barnes & Noble.com Terms of Use.
  • - Barnes & Noble.com reserves the right not to post any review -- particularly those that do not follow the terms and conditions of these Rules. Barnes & Noble.com also reserves the right to remove any review at any time without notice.
  • - See Terms of Use for other conditions and disclaimers.
Search for Products You'd Like to Recommend

Recommend other products that relate to your review. Just search for them below and share!

Create a Pen Name

Your Pen Name is your unique identity on BN.com. It will appear on the reviews you write and other website activities. Your Pen Name cannot be edited, changed or deleted once submitted.

 
Your Pen Name can be any combination of alphanumeric characters (plus - and _), and must be at least two characters long.

Continue Anonymously

    If you find inappropriate content, please report it to Barnes & Noble
    Why is this product inappropriate?
    Comments (optional)