Pub. Date:
Energy Technology 2012: Carbon Dioxide Management and Other Technologies / Edition 1

Energy Technology 2012: Carbon Dioxide Management and Other Technologies / Edition 1


Current price is , Original price is $159.95. You

Temporarily Out of Stock Online

Please check back later for updated availability.

This item is available online through Marketplace sellers.

Product Details

ISBN-13: 9781118291382
Publisher: Wiley
Publication date: 04/03/2012
Pages: 540
Product dimensions: 5.90(w) x 9.00(h) x 1.20(d)

About the Author

Maria D. Salazar-Villalpando, Department of Energy/National Energy Technology Laboratory

Neale R. Neelameggham, IND LLC

Soobhankar Pati, Metal Oxygen Separation Technologies

Donna Post Guillen, Idaho National Laboratory

Table of Contents

Preface xiii

Editors xvii

Energy Technologies and Carbon Dioxide Management

CO2 Management and Utilization

Solar Activated Photocatalytic Conversion of CO2 and Water to Fuels by TiO2-Based Nanocomposites Q. Zhang L. Liu Y. Li 5

Photocatalytic Efficacy of 1-Dimensional Nanocomposite Electrode J. Lee B. Ding J. Noh K. Hong 9

Reduction of Energy Consumption and GHGs Emission in Investment Casting Process by Application of a New Casting Method X. Dai M. Jolly B. Zeng 15

Bauxite Residue Neutralization and Carbon Sequestration from Flue Gas L. Alves Venancio E. Negrão Macedo J. Antonio Silva Souza F. Aracati Botelho 23

50% Reduction of Energy and CO2 Emission in Metallurgical Furnaces by Burners M. Potesser D. Spoljaric B. Holleis M. Demuth 31

CO2 Removal from Industrial Off-Gas Streams by Fluidized Bed Carbonation K. Pericleous M. Molaei M. Patel 39

A Hydro-Mechanical Model and Analytical Solutions for Geomechanical Modeling of Carbon Dioxide Geological Sequestration Z. Xu Y. Fang T. Scheibe A. Bonneville 47

Energy Technologies

Energy Opportunities in the Aluminium Processing Industry C. Belt 57

An Alternative Lower Temperature Route For The Recovery of Cobalt From Slag A. Jha Y. Hara 65

High Thermal Energy Storage Density LiNO3-NaNo3-KNO3-KNO2 Quaternary Molten Salts for Parabolic Trough Solar Power Generation T. Wang D. Mantha R. Reddy 73

Global Primary Aluminium Industry 2010 Life Cycle Inventory C. Bayliss M. Bertram K. Buxmann B. de Gelas S. Jones L. Wu 85

Analysis of Combustion Efficiency Using Laser-Induced Fluroscence Measurements of OH-Radicals M. Schnitzler R. Bölling H. Pfeifer 93

A Solid State Thermoelectric Power Generator Prototype Designed to Recover Radiant Waste Heat M. Takla O. Burheim L. Kolbeinsen S. Kjelstrup 101

Study on Smelting Reduction of Coal-Containing Pellets of V-Ti Bearing Beach Placers by Combined Rotary Hearth Furnace and Direct Current Arc Furnace H. Lu J. Xu Q. Li 109

A Novel Method Combined Ionothermal Synthesis and Microwave Energies for Rapid Production of ZIFS L. Yang H. Lu S. Zhou 117

The Relationship between Energy Consumption and CO2 Emissions in Iron and Steel Making H. Bai X. Lu H. Li L. Zhao X. Liu N. Li W. Wei D. Cang 125

Development and Application of Shaft Kiln in China L. Guo M. Xian L. Dong 133

Preparation of Biodiesel by Transesterification of Canola Oil Using Solid Base Catalyst KOH/?-Al2O3 S. Sadrameli M. Omraei 141

Waste Heat Recovery

Effect of Materials on the Autoignition of Cyclopentane D. Guillen 151

Low Grade Waste Heat Driven Desalination and SO2 Scrubbing S. Garimella D. Ziegler J. Klausner 159

Waste Heat Integration Potential Assessment through Exergy Analysis in an Aluminium Production Facility C. Nowicki L. Gosselin C. Duchesne 165

Sustainability, Energy Efficiency and CO2 Elimination in Concentrate Drying J. Talja S. Chen H. Mansikkaviita 173

Development of Heat Recovery System from Steelmaking Slag Y. Ta H. Tobo Y. Hagio M. Kuwayama 181

Dry Granulation of Molten Blast Furnace Slag and Heat Recovery from Obtained Particles Y. Qin X. Lv C. Bai G. Qiu 187

The Environmental Load Assessment of Iron and Steel Producing BF-BOF and EAF Route Process H. Li S. Tao H. Bai D. Cang 195

Aluminium Smelter Waste Heat Recovery Plant (Heat Exchangers Fouling and Corrosion-A Detailed Investigation) H. Fanisalek M. Bashiri R. Kamali 203

Battery Recycling

Session I

Economic and Environmental Trade-Offs for Li-Based Battery Recycling G. Gaustad M. Ganter X. Wang C. Bailey C. Babbitt B. Landi 219

Battery Recycling by Hydrometallurgy: Evaluation of Simultaneous Treatment of Several Cell Systems C. Nogueira F. Margarido 227

The Use of Liquid-Liquid Extraction and Electroplating to Metals Recovery from Spent Batteries K. Provazi D. Espinosa J. Tenório 235

Magnetic Materials for Energy Applications II

Permanent Magnets for Energy Applications

Search for New Rare Earth Based Permanent Magnetic Materials B. Jensen K. Dennis R. McCallum 247

Magnetocaloric and Magnetostrictive Materials

Effect of W Substitution on the Magnetostrictive Behavior of [001] Fe-Ga Alloy Single Crystal C. Ren B. Saha M. Ramanathan S. Guruswamy 257

Power Conversion and Microstructural Effects

Nanocomposite Alloy Design for High Frequency Power Conversion Applications S. Shen P. Ohodnicki S. Kernion A. Leary V. Keylin J. Huth M. McHenry 267

Magnetic Properties of Strontium Ferrite Prepared Using Submicron-Sized SrFe12-xAlxO19 Powders V. Menushenkov V. Shubakov S. Ketov 275

Influence of Magnetization on the Hydrogen Embrittlement Behavior in AISI 4340 Steel M. Ramanathan B. Saha C. Ren S. Guruswamy M. McCarter 281

The Effect of Dynamic Electropulsing on Mechanical and Microstructural Properties of Cold Rolled Fe-6.5%Si Alloy Sheet Y. Liang F. Ye H. Zhou F. Wang G.Tang J. Lin 289

Materials in Clean Power Systems VII: Clean Caol-, Hydrogen Based-Technologies, and Fuel Cells

Fuel Cells

Study of Microstructure and Electrical Conductivity on (Ce0.9Nd0.1)1-xMxO2-Δ Electrolytes for Intermediate-Temperature Solid Oxide Fuel Cells F. Menga Y. Xiab D. Zhouc N. Trubakia X. Liub J. Mengb 301

Transition Metal Doping of Manganese Cobalt Spinel Oxides for Coating SOFC Interconnects J. Fergus Y. Liu J. Ganley D. Nair W. Tilson A. Dekich D. Kumar Y. Liu J. Ganley W. Tilson A. Dekich J. Fergus 305

Materials for Hydrogen Production, Separation, and Storage

Free Form Fabrication of Catalytic Substrates T. Salisbury J. Downey W. Gleason S. Davis G. Pinson R. Christianson M. Berlin R. James E. Rosenberg K. Gleason R. Hiebert J. McCloskey 315

Improved Palladium Coatings for Hydrogen Purification Membranes S. Davis J. Downey W. Gleason T. Salisbury G. Pinson R. Christianson M. Berlin R. James E. Rosenberg K. Gleason R. Hiebert J. McCloskey 323

Raman Spectroscopy of Ammonia Borane at Low Temperature and High Pressure S. Najiba J. Chen V. Drozd A. Durygin Y. Sun 331

Mechanical Performance of Materials for Current and Advanced Nuclear Reactors

Mechanical Behavior of Reactor Materials

Fracture Toughness of 9Cr-1MoV and Thermally Aged Alloy 617 for Advanced Reactor Applications R. Nanstad M. Sokolov X. Chen 343

Characterization and Modeling of Microstructural Evolution in Nuclear Materials

Elemental Solubility Tendency for the Phases of Uranium by Classical Models Used to Predict Alloy Behavior V. Blackwood T. Koenig J. Porter D. Olson B. Mishra R. Mariani D. Porter 359

Irradiation and Testing of Fuels and Cladding Materials

Nanoindentation and TEM Characterization of Ion Irridiated 316L Stainless Steels K. Hattar T. Buchheit P. Kotula A. McGinnis L. Brewer 373

Processing to Control Morphology and Texture in Magnetic Materials

Processing to Enhance Performance in Rare Earth Permanent Magnets

Cluster Synthesis, Direct Ordering and Alignment of Rare-Earth Transition-Metal Nanomagnets B. Balamurugan R. Skomski D. Le Roy 385

Role of Magnetic Fields and Texturing to Improved Magnetic Materials

Nanostructuring and Texturing for Improved Magnetic Materials D. Sellmyer Y. Liu T. George 393

Author Index 403

Subject Index 407

Customer Reviews

Most Helpful Customer Reviews

See All Customer Reviews