HAZOP: Guide to Best Practice, 3rd Edition describes and illustrates the HAZOP study method, highlighting a variety of proven uses and approaches. This updated edition brings additional experience with which to assist the reader in delivering optimum safety and efficiency of performance of the HAZOP team. HAZOP is the most widely-used technique in the process industries for the identification of hazards and the planning of safety measures.
This book explains how to implement HAZOP techniques in new facilities and apply it to existing facilities. The content covers many of the possible applications of HAZOP and takes you through all the stages of a study. This simple, easily digestible book is a favorite in the chemical and process industries.
- A concise and clear guide to the do's and don'ts in HAZOP
- New edition brings additional experienceto help youdeliver optimum safety and efficiency of performance.
- Updated material includes a section on HAZOP study of a procedure with a detailed example, new sections on pre-meeting with the client auditing a study, human factors and linking HAZOP study to LOPA. A section on start-up and shutdown has been added to the chapter on specific applications of HAZOP.
|Product dimensions:||6.00(w) x 8.90(h) x 0.50(d)|
About the Author
After 10 years in the Offshore O & G Industry, retiring from BP, Crawley split his time as LP Consultant and Senior Lecturer in Academe. It was during his time in the O & G industry that he learned different ways in which the HAZOP tool could be used more, particularly the first “Drilling HAZOP” in UKCS some 33 years ago. This in particular revealed a number of deficiencies in the design of drill rigs which produced novel design changes.
HAZOP has been his fascination and he believes that it is a very flexible tool which has more potential for development.Brian Tyler established his consulting company with his colleague Bob Simmons in 1990. At that time he was also on the staff of the chemistry department at the University of Manchester Institute of Science and Technology (UMIST). His research work at that time focused on the areas of fire, explosion, self-heating and kinetics, including work on industrially related problems. By 1990 he had over 20 years’ experience of organising meetings and courses under the general heading ‘Safety in the Chemical Industry’. These included HAZOP and HAZAN, Fire and Explosion, Accident Investigation, Gas Dispersion and many others. His course “HAZOP study for team leaders and team members" is still run by the IChemE under the leadership of Phil Aspinall. Another major activity has been the authorship to two IChemE monographs. The first, written with Frank Crawley and Malcolm Preston, is ‘HAZOP, Guide to Best Practice’; the second with Frank Crawley is ‘Hazard Identification Methods’. In 2011 he was one of the first group elected to the newly established class of Associate Fellow of the Institution of Chemical Engineers.
Table of Contents
1. Introduction 2. Process hazard studies 3. The HAZOP study method 4. The detailed HAZOP study procedure 5. Organizing a HAZOP study 6. Carrying out a study 7. Recording 8. Training 9. Company procedures for HAZOP study 10. HAZOP study of computer-controlled processes 11. Specific applications of HAZOP 12. Factors for a successful HAZOP study