Innovative Processing and Synthesis of Ceramics, Glasses, and Composites V / Edition 1 available in Hardcover
- Pub. Date:
The most recent advancements in the areas of ceramic/composite processing and characterization are presented in this new volume. Selected topics include sol-gel processing, microwave sintering, reaction forming/bonding, polymer precursors, rapid prototyping, mechanical alloying, diamond and diamond-like structures, and functionally graded materials.
Proceedings of the symposium held at the 103rd Annual Meeting of The American Ceramic Society, April 22-25, 2001, in Indiana; Ceramic Transactions, Volume 129.
About the Author
J. P. Singh is the author of Innovative Processing and Synthesis of Ceramics, Glasses, and Composites V, published by Wiley.
Narottam P. Bansal received his Ph. D. in 1973 and is a Senior Research Scientist in the Ceramic Branch, Materials and Structures Division, NASA Glenn Research Center. He is a Fellow of the American Ceramic Society and is recipient of NASA's Medal for Exceptional Scientific Achievements, R&D 100 Award and Hind Rattan Award from the NRI Society of India. Dr. Bansal is author/co-author of four books, six invited book chapters, three review articles, eight NASA Tech Briefs, and 215 research papers including 92 peer-reviewed journal articles, and has been awarded seven U.S. Patents.
Amit Bandyopadhyay is the author of Innovative Processing and Synthesis of Ceramics, Glasses, and Composites V, published by Wiley.
Table of Contents
CYD/CYI and Plasma Technology
Cubic and Tetragonal Hafnium Oxide Films Prepared by lon-Beam-Assisted Deposition 3 R. R. Manory I. Shimizu,! Mori, S. Miyake, H. Saito, G. Kimmel, and T.Tanaka
Plasma-Sprayed Ceramic Coatings on Glass and Glass Ceramic Substrates 15 R. Gadow, A. Killingen and C. Li
Gas Infiltration and Preceramic Polymer Processing Manufacturing of Biomorphic SiC Ceramics by Gas Phase Infiltration of Wood 33 E.Vogli, C. Zollfrank, H. Sieben R Greil, and J. Mukerji
Manufacturing of Anisotropie Ceramics from Preceramic Polymer Infiltrated Wood 43 C. Zollfrank, R. Kladny, H. Sieben R Greil, and G. Motz
Modeling the Dynamic Rheological Behavior of AGAR-Based Aqueous Binders 53 K. C. Labropoulos, D. E. Niesz, and S. C. Danforth
Effects of Alloying with Nb, Re, and AI on Yield Strength of MoSi 2 69 A. A. Sharif, A. Misra, J. J. Petrovic, and T. E. Mitchell
In situ Synthesis of Nonoxide-Boron Nitride (NOBN) Composites 83 G. J. Zhang, J. F.Yang,! Ohji, and S. Kanzaki
Fabrication of Lightweight Oxide/lntermetallic Composites at I000°C by the Displacive Compensation of Porosity (DCP) Method 93 RJ.Wurm, R Kumar; K. D. Ralston, M.J. Mills, and K. H. Sandhage
Microstructure and Mechanical Properties of SiAION Ceramics with Porous Structure 103 J.Yang,Y Beppu, G.J. Zhang, and T Ohji
Functionally Graded Materials & Coatings
Functionally Graded Porosity in Ceramics—Analysis with High Resolution Computed Tomography 113 J. Goebbels, G. Weidemann, R. Dittrich, M. Mangier; and G.Tomandl
Novel Processing for Combined Coatings with Dry Lubrication Ability 125 R. Gadow and D. Scherer
Ceramic Coatings on Fiber Woven Fabrics for Lightweight Ballistic Protection 137 K.V Niessen and R. Gadow
Laminated Object Manufacturing
The Effect of Sheetstock on the Layered Manufacturing of a Telescoping Ceramic Actuator 153 A. A. Bender and R. J. Rayne
Electronic and Magnetic Materials
Binder Removal by Supercritical Extraction from BaTi03-Pt Multilayer Ceramic Capacitors 165 S.J. Lombardo, R.V Shende, and D. 5. Krueger
Processing and Characterization of PZT and PLZT Thick Films 175 O. Huang, A. Bandyopadhyay, and S. Bose
Micromachining of PZT-Based MEMS 187 T B. Myers, S. Bose, A. Bandyopadhyay, and J. D. Fraser
Templated Grain Growth of Lead Metaniobate Ceramics by Solid Freeform Fabrication 199 K. Nonaka, M. Allahverdi, and A. Safari
Investigation of Ni-Cu-Zn Ferrite with High Performance Derived from Nanoferrite Powders 211 X. Wang, W Qu, L Li, Z. Gui, and J. Zhou