Pavement Analysis and Design / Edition 2

Pavement Analysis and Design / Edition 2

by Yang Huang
ISBN-10:
0131424734
ISBN-13:
9780131424739
Pub. Date:
08/08/2003
Publisher:
Pearson Education
ISBN-10:
0131424734
ISBN-13:
9780131424739
Pub. Date:
08/08/2003
Publisher:
Pearson Education
Pavement Analysis and Design / Edition 2

Pavement Analysis and Design / Edition 2

by Yang Huang
$266.65 Current price is , Original price is $266.65. You
$226.22 
  • SHIP THIS ITEM
    Not Eligible for Free Shipping
  • PICK UP IN STORE
    Check Availability at Nearby Stores
$101.80 
  • SHIP THIS ITEM

    Temporarily Out of Stock Online

    Please check back later for updated availability.

    • Condition: Good
    Note: Access code and/or supplemental material are not guaranteed to be included with used textbook.

Overview

For one/two-semester, undergraduate/graduate courses in Pavement Design.

This text covers both theoretical and practical aspects of pavement analysis and design. It includes some of the latest developments in the field, and some very useful computer software—developed by the author—with detailed instructions.


Product Details

ISBN-13: 9780131424739
Publisher: Pearson Education
Publication date: 08/08/2003
Edition description: Subsequent
Pages: 792
Product dimensions: 287.40(w) x 374.01(h) x 74.80(d)

Read an Excerpt

The first edition of Pavement Analysis and Design was published in 1993. The widespread adoption of this book by so many colleges as an undergraduate or graduate text has encouraged me to write this second edition. A major event during the past decade was the completion of the Strategic Highway Research Program (SHRP), which led to the development of the highly publicized 2002 Pavement Design Guide. However, at the time of this writing, the final draft of the 2002 Guide is still not available. It will likely be a few more years before the Guide is approved and implemented by the American Association of State Highway and Transportation Officials (AASHTO). For this reason, only a brief preview of the 2002 Pavement Design Guide is presented, in an appendix.

Other than those improvements in the computer programs that necessitate changes in the text, not much is changed in the theoretical part of this book. Although new procedures were developed by SHRP for material characterization and pavement evaluation, these procedures, such as Superpave, are still in the developmental stage and will be subject to change as more experience is gained in their use. In this second edition, Superpave is presented in an appendix. To extend the usefulness of the book, a new appendix on Pavement Management System is added. It is hoped that a more extensive revision will be made in the third edition, after the 2002 Pavement Design Guide is fully implemented and all the testing and evaluation procedures are finalized. Major changes made in this edition are the following:

  1. The floppy disk containing the four DOS programs is replaced by a CD containing a Windows program called KENPAVE,which combines the original KENLAYER, LAYERINP, KENSLABS, and SLABSINP into a single package, together with the addition of some computer graphics. The software was written in Microsoft Visual Basic 6.0 and can be run on any computer with Windows 95 or higher. Detailed instructions on the use of KENPAVE can be found in the software program.
  2. Section 13.5 on the AASHTO method of overlay design has been totally revised. The 1986 AASHTO Design Guide was used in the first edition. The guide was revised in 1993 with practically no change in the design of new pavements, but the design of overlay was completely rewritten.
  3. New developments and information from the literature have been added to keep the book current. A new method based on the Mohr-Coulomb failure criterion has been added in KENLAYER for nonlinear analysis, and new comparisons age made between KENLAYER and the latest Windows version of MICH-PAVE.
  4. Three new appendices have been added: Appendix D—An Introduction to Superpave; Appendix E—Pavement Management Systems; and Appendix F—A Preview of 2002 Design Guide. Appendix C is combined with Appendix B; a new Appendix C contains a brief description of KENPAVE.
  5. To provide room for the above additions, Sections 3.4.3 (on contained rock asphalt mats) and 10.5 (on probabilistic computer programs) have been deleted. Also deleted from the appendices are the description of the input programs and the programming details of KENLAYER and KENSLABS, such as subroutines and flowcharts. The description of input and output parameters in Chapters 3 and 5 and the illustrative examples in the appendices also have been removed, because they can now be found in the software program.

I wish to acknowledge gratefully the contribution of my colleague, Dr. Kamyar C. Mahboub, who wrote the appendices on Superpave and Pavement Management Systems. These new additions broaden the scope of this book and make it more suitable for a wider audience. I also want to offer my heartfelt thanks to AASHTO, the Transportation Research Board, the Federal Highway Administration, the Asphalt Institute, the Portland Cement Associations, and many others who have permitted the use of the information they developed. Finally, I would like to thank my wife Jane for her support in the use of our retirement time on this book.

YANG H. HUANG, Sc. D., P E.
Professor Emeritus of Civil Engineering
University of Kentucky

Table of Contents

1. Introduction.


2. Stresses and Strains in Flexible Pavements.


3. KENLAYER Computer Program.


4. Stresses and Deflections in Rigid Pavements.


5. KENSLABS Computer Program.


6. Traffic Loading and Volume.


7. Material Characterization.


8. Drainage Design.


9. Pavement Performance.


10. Reliability.


11. Flexible Pavement Design.


12. Rigid Pavement Design.


13. Design of Overlays.


Appendix A. Theory of Viscoelasticity.


Appendix B. Theory of Elastic Layer Systems.


Appendix C. KENPAVE Software.


Appendix D. An Introduction to Superpave.


Appendix E. Pavement Management Systems.


Appendix F. A Preview of 2002 Pavement Design Guide.


Appendix G. List of Symbols.


Appendix H. References.

Preface

The first edition of Pavement Analysis and Design was published in 1993. The widespread adoption of this book by so many colleges as an undergraduate or graduate text has encouraged me to write this second edition. A major event during the past decade was the completion of the Strategic Highway Research Program (SHRP), which led to the development of the highly publicized 2002 Pavement Design Guide. However, at the time of this writing, the final draft of the 2002 Guide is still not available. It will likely be a few more years before the Guide is approved and implemented by the American Association of State Highway and Transportation Officials (AASHTO). For this reason, only a brief preview of the 2002 Pavement Design Guide is presented, in an appendix.

Other than those improvements in the computer programs that necessitate changes in the text, not much is changed in the theoretical part of this book. Although new procedures were developed by SHRP for material characterization and pavement evaluation, these procedures, such as Superpave, are still in the developmental stage and will be subject to change as more experience is gained in their use. In this second edition, Superpave is presented in an appendix. To extend the usefulness of the book, a new appendix on Pavement Management System is added. It is hoped that a more extensive revision will be made in the third edition, after the 2002 Pavement Design Guide is fully implemented and all the testing and evaluation procedures are finalized. Major changes made in this edition are the following:

  1. The floppy disk containing the four DOS programs is replaced by a CD containing a Windows program called KENPAVE, which combines the original KENLAYER, LAYERINP, KENSLABS, and SLABSINP into a single package, together with the addition of some computer graphics. The software was written in Microsoft Visual Basic 6.0 and can be run on any computer with Windows 95 or higher. Detailed instructions on the use of KENPAVE can be found in the software program.
  2. Section 13.5 on the AASHTO method of overlay design has been totally revised. The 1986 AASHTO Design Guide was used in the first edition. The guide was revised in 1993 with practically no change in the design of new pavements, but the design of overlay was completely rewritten.
  3. New developments and information from the literature have been added to keep the book current. A new method based on the Mohr-Coulomb failure criterion has been added in KENLAYER for nonlinear analysis, and new comparisons age made between KENLAYER and the latest Windows version of MICH-PAVE.
  4. Three new appendices have been added: Appendix D—An Introduction to Superpave; Appendix E—Pavement Management Systems; and Appendix F—A Preview of 2002 Design Guide. Appendix C is combined with Appendix B; a new Appendix C contains a brief description of KENPAVE.
  5. To provide room for the above additions, Sections 3.4.3 (on contained rock asphalt mats) and 10.5 (on probabilistic computer programs) have been deleted. Also deleted from the appendices are the description of the input programs and the programming details of KENLAYER and KENSLABS, such as subroutines and flowcharts. The description of input and output parameters in Chapters 3 and 5 and the illustrative examples in the appendices also have been removed, because they can now be found in the software program.

I wish to acknowledge gratefully the contribution of my colleague, Dr. Kamyar C. Mahboub, who wrote the appendices on Superpave and Pavement Management Systems. These new additions broaden the scope of this book and make it more suitable for a wider audience. I also want to offer my heartfelt thanks to AASHTO, the Transportation Research Board, the Federal Highway Administration, the Asphalt Institute, the Portland Cement Associations, and many others who have permitted the use of the information they developed. Finally, I would like to thank my wife Jane for her support in the use of our retirement time on this book.

YANG H. HUANG, Sc. D., P E.
Professor Emeritus of Civil Engineering
University of Kentucky

From the B&N Reads Blog

Customer Reviews