This volume contains the edited Proceedings of the Sixth World Round Table Conference on Sintering, held in Herceg-Novi, Yugoslavia on September 2-6, 1985. It was organized by the International Institute for the Science of Sintering (IISS), headquartered in Beograd. Every fourth year since 1969, the Institute has organized such a Round Table Conference on Sintering, each has taken place at some selected lo cation within Yugoslavia. A separate series of IISS Summer Schools have also been held at four year intervals, but they have been offset by about two years, so they occur between the main Conferences. As a rule, the Summer Schools have been devoted to more specific topics and they also take place in different countries. The aim of these Conferences and their related Summer Schools has been to bring together scientists from allover the world who work in various fields of science and technology concerned with sinter ing and sintered materials. A total of six IISS Conferences have been held over the period 1969-1985, and they have been supplemented by the three Summer Schools held in Yugoslavia, Poland and India (in 1975, 1979 and 1983, respectively). This most recent five day Conference addressed the fundamental scien tific background as well as the technological state-of-the-art in sintering and sintered materials. It encompassed many of the high technology sintered materials needed for a wide variety of research and industrial applications.
|Edition description:||Softcover reprint of the original 1st ed. 1987|
|Product dimensions:||7.01(w) x 10.00(h) x 0.03(d)|
Table of ContentsI. Solid State Sintering.- Towards the Understanding of the Process of Sintering.- Rate Controlled Sintering Revisited.- On the Mechanism of Grain Boundary Elimination from Sintering Neck.- Effect of Particle Size Distribution on Sintering.- Contribution to Investigation of the Sintering Process from the Point of Sintering Diagrams.- Dislocation Structure of Nickel Powder and its Role in the Sintering Process.- II. Fine Particles.- Twin Formation During Sintering of Micron and Submicron Sized Copper Particles.- Surface Relaxation, Dynamics of Geometric Structure and Macrokinetics of Densification During Sintering of Ultrafine Powders.- Theoretical Analysis of Metal Particle Cooling in the Rotating Electrode Process.- Preparation of Molybdenum Powders by Rotating Electrode Process.- Variable Influencing the Sintering of MgO.- III. Activated Sintering.- Activated Sintering.- Dislocation-Activated Sintering Processes.- The Dependence of Sinterability of Ni-Added W-Powder Compact on the Contact Neck Size of W-Particles.- Metal Activated Recrystallization and Creep of Tungsten Fibres.- IV. Liquid Phase Sintering.- Macropore Filling During Hot Isostatic Pressing of Liquid Phase Sintered Ceramics.- Formation of Residual Porosities During Liquid Phase Sintering of W-Ni-Fe.- Fundamental Study of the Later Stages of Liquid Phase Sintering of a Ni Base P/M Superalloy-Metallographic Observations on Quenched Supersolidus-Sintered Materials.- Observation of Liquid Phase Sintering of a High Speed Steel Powder.- V. Hot Pressing and Hot Isostatic Pressing.- The Processing of a Permalloy-Magnetite Composite by Hydrothermal Reaction Sintering.- Densification During Hot Isostatic Pressing of a High Temperature Ni-Alloy.- The Preparation of Very Small Grain Size Compacts of Lead Telluride.- Microstructural Features of Transparent PLZT Ceramics.- Sintering and Microstructure of PZT-ZrO2 Composites.- VI. Sintering of Multiphase Systems.- Sintering in Chemically Heterogeneous Systems.- Calculation of Phase Diagrams.- Structural Evolution During the Sintering of SnO2 and SnO2-2 Mole% CuO.- Inhibition of the Grain Growth in PZT Ceramics by Doping with Neodymium Oxide.- Controlled Grain Growth in Ceramics.- Influence of Dewatering of the Yttrium-Zirconium Hidroxide Precipitates on the Sintering Behaviour of Their Calcined Products.- Sintering and Microstructure Development in the System BaTiO3-CaTiO3-TiO2.- The Influence of Aggregates on the Sintering of MgCr2O4-TiO2 Solid Solution.- The Influence of Sintering Parameters and Subsequent Thermal Treatment on U-I Characteristics and Degradation of ZnO Varistors.- Sintering of Alumina in Oxygen and Nitrogen Containing Liquids.- Chemically Driven Pore Growth.- Magnetic Properties of Sintered Fe-Sn Cores.- The Influence of Structural Factors on Mechanical Properties of Sintered Materials.- Sintering of Iron Powder with an Addition of Ferromanganese.- VII. Non-Oxide Ceramics.- Effect of Additives on the Cold Compaction Behaviour of SiC Powder.- Sintering of Nonmetallic Nitrides.- New Experimental Data in the C-Fe-W, C-Co-W, C-Fe-Ni-W and C-Co-Ni-W Systems Application to Sintering Conditions of Cemented Carbides Optimization of Steel Binder Composition by Partial Factorial Experimens.- VIII. International Cooperation.- International Cooperation in High Technology Ceramics.- International Program Committee.- Contributors.