Stormwater Management for Land Development: Methods and Calculations for Quantity Control / Edition 1 available in Hardcover
Introductory guide to hydraulics, hydrology, and stormwatermanagement designStormwater Management for Land Development is a unique, much-neededbook on developing stormwater management plans that only requiresreaders to understand algebra, trigonometry, and geometry.Beginning with the fundamentals, it walks readers through the ABCsof fluid mechanics and hydrology and presents practical methods anddesigns to control stormwater.Useful to the growing group of professional surveyors and engineerswho may not have taken fluid mechanics or hydrology courses,Stormwater Management for Land Development features:* Sections on elementary fluid mechanics including statics,dynamics, and open channel flow* Sections on practical hydrology including design rainfall, traveltime, and runoff methods* Material on NRCS/SCS unit hydrograph and TR-55 tabular hydrographprocedures, with reference to the latest WinTR-55 variant* Design methods for stormwater conveyance, including storm sewer,culvert, and open channel designs* A detailed procedure for sizing and designing a multiple stageoutlet structure for multiple event detention requirements* More than seventy-five example problems illustrating fluid flowand hydrology calculation methods* Review problems at the end of most chaptersWith more than 150 helpful illustrations, Stormwater Management forLand Development is the most comprehensive, basic guide tohydraulics, hydrology, and stormwater management design methods forquantity control.
|Product dimensions:||6.30(w) x 9.30(h) x 1.00(d)|
About the Author
Thomas A. Seybert, PhD, is Associate Professor of Engineering in the Surveying Program at The Pennsylvania State University, Wilkes–Barre Campus.
Table of Contents
1 INTRODUCTION TO STORMWATER MANAGEMENT.
1.2 Effect of Land Development.
1.3 Stormwater Design Criteria.
1.4 Comprehensive and Innovative Design.
1.5 Book Organization.
2 FLUID PROPERTIES AND BASIC STATICS.
2.3 Fluid Properties.
2.5 Forces on Submerged Objects.
2.6 Buoyant Force.
3 FLUID FLOW.
3.2 Flow Rate.
3.3 Conservation of Mass.
3.4 Energy Methods.
3.5 Bernoulli Equation.
3.6 Energy Losses.
3.7 General Energy Equation.
3.8 The Orifice.
4 OPEN CHANNEL FLOW.
4.2 Flow Classifications.
4.3 Hydraulic Radius and Depth.
4.4 Flow Behavior.
4.5 Steady Uniform Flow.
4.6 Specific Energy and Critical Depth.
4.7 Channel Sizing.
4.8 Circular Conduits Flowing Full or Partially Full.
4.9 The Weir.
5 HYDROLOGY, WATERSHEDS, AND SOILS.
5.2 The Hydrologic Cycle and Water Budget.
5.4 Soils and Infiltration.
5.5 Watershed versus Site Hydrology.
6.2 Rainfall Characteristics.
6.3 VDF and IDF Charts.
6.4 Design Storms.
7 TRAVEL TIME.
7.2 Time of Concentration.
7.3 Sheet Flow.
7.4 Concentrated Flow.
7.5 Mixed Sheet and Concentrated Flow.
7.6 Channel or Pipe Flow.
7.7 Segmental Flow Analysis.
7.8 NRCS Segmental Method.
7.9 NRCS Lag Equation.
7.10 Comparison of Methods.
8 RUNOFF DEPTH AND PEAK FLOW.
8.2 Runoff Curve Number Method.
8.3 NRCS Graphical Peak Discharge Method.
8.4 Rational Peak Flow.
9.2 Unit Hydrograph Concepts.
9.3 NRCS Dimensionless Unit Hydrograph.
9.4 Delmarva Unit Hydrograph.
9.5 NRCS Tabular Hydrograph.
9.6 Rational Hydrograph.
10 ROUTING METHODS.
10.2 Channel Routing.
10.3 Muskingum Channel Routing.
10.4 Muskingum-Cunge Channel Routing.
10.5 Modified Puls Basin Routing.
11 DRAINAGE CONVEYANCE AND CONTROL.
11.2 Swales and Open Channels.
11.3 Storm Sewer Design.
12 MULTIPLE-EVENT DETENTION DESIGN.
12.2 Detention Volume Estimates.
12.3 Multiple-Stage Outlet Flow Analysis.
12.4 Storage and Outlet Design Procedure.
12.5 Design Example.
APPENDIX A: DEVELOPMENT OF THE MANNING EQUATION.
APPENDIX B: DEVELOPMENT OF THE MUSKINGUM ROUTINGEQUATIONS.
APPENDIX C: DETAILED CALCULATIONS FOR EXAMPLE 11.4.
APPENDIX D: MOODY DIAGRAM.