Strategic Materials and Computational Design / Edition 1 available in Hardcover
- Pub. Date:
The session on Geopolymers and other Inorganic Polymers continues to attract growing attention from international researchers (USA, Australia, France, Germany, Italy, Czech Republic, and Viet Nam) and it is encouraging to see the variety of established and new applications being found for these novel and potentially useful materials. The session organizer gratefully acknowledges the support of the US Air Force Office of Scientific Research (AFOSR) through Dr. Joan Fuller. The AFOSR has continuously supported these conferences since the first meeting in Nashville, TN in 2003.
Focused Session 3 was dedicated to design, modeling, simulation and characterization of ceramics and composites. 27 technical papers were presented on prediction of crystal structure and phase stability, characterization of interfaces and grain boundaries at atomic scale, optimization of electrical, optical and mechanical properties, modeling of defects and related properties, design of materials and components at different length scales, application of novel computational methods for processing. Four of these papers are included in this issue of CESP.
Focused Session 4 was dedicated to MAX phases - a class of ternary carbides and nitrides with nanolaminated structure and general formula Mn+1AXn (where M is an early transition metal, A is an A-group element from IIIA to VIA, X is either C or N, and n=1, 2, 3 …). The MAX phases have attracted recently a lot of attention because they possess unique combination of metallic- and ceramic-like properties. In all, 30 technical papers were presented during this session. Four of these papers are included in this issue.
|Series:||Ceramic Engineering and Science Proceedings Series , #538|
|Product dimensions:||6.40(w) x 9.40(h) x 0.70(d)|
About the Author
Waltraud M. Kriven is Professor of Materials Science and Engineering at the University of Illinois at Urbana-Champaign. Professor Kriven received her Ph.D. in 1976 in Solid State Chemistry from the University of Adelaide in South Auatralia and her B.Sc. (Honors) and Baccalaureate degrees in Physical Chemistry, Inorganic Chemistry, and Biochemistry from the same institute. She is an internationally recognized expert in the areas of phase transformations in inorganic compounds and their applications in structural ceramic composites. She has authored or co-authored over 240 research publications, and fourteen books to date.
Table of Contents
GEOPOLYMERS AND OTHER INORGANIC POLYMERS
Geomaterial Foam to Reinforce Wood 3E. Prud'homme, P. Michaud, C. Peyratout, A. Smith, S. Rossignol,E. Joussein, and N. Sauvât
Effect of Curing Conditions on the Porosity Characteristics ofMetakaolin-Fly Ash Geopolymers 11Tammy L. Metroke, Michael V. Henley, and Michael I.Hammons
New Insights on Geopolymerisation using Molybdate, Raman, andInfrared Spectroscopy 17C. H. Rüscher, E. Mielcarek, J. Wongpa, F. Jirasit, and W.Lutz
Transformation of Polysialate Matrixes from Al-Rich and Si-RichMetakaolins: Polycondensation and Physico-Chemical Properties35Elie Kamseu and Cristina Leonelli
Effect of High Tensile Strength Polypropylene Chopped FiberReinforcements on the Mechanical Properties of Sodium BasedGeopolymer Composites 47Daniel R. Lowry and Waltraud M. Kriven
Properties of Basalt Fiber Reinforced Geopolymer Composites51E. Rill, D. R. Lowry, and W. M. Kriven
Novel Applications of Metal-Geopolymers 69Oleg Bortnovsky, Petr Bezucha, Petr Sazama, Jiri Dëdecek,Zdena Tvarùzkovâ, and Zdenék Sobalik
Making Foamed Concretes from Fly Ash Based on Geopolymer Method83Nhi Tuan Pham and Hoang Huy Le
Preparation of Electrically Conductive Materials Based onGeopolymers with Graphite 91Z. Cerny, I. Jakubec, P. Bezdicka, L. Sulc, J. Machacek, J.Bludskâ, and P. Roubicek
Effect of Synthesis Parameters and Post-Cure Temperature on theMechanical Properties of Geopolymers Containing Slag 101Tammy L. Metroke, Brian Evans, Jeff Eichler, Michael I. Hammons,and Michael V. Henley
COMPUTATIONAL DESIGN, MODELING, SIMULATION ANDCHARACTERIZATION
Electronic Structure and Band-Gaps of Eu-Doped LaSi3N5 TernaryNitrides 109L. Benco, Z. Lences, and P. Sajgalik
First Principle Molecular Dynamic Simulations of Oxygen PlasmaEtching of Organosilicate Low Dielectric Materials 119Jincheng Du and Mrunal Chaudhari
Kinetic Monte Carlo Simulation of Cation Diffusion inYttria-Stabilized Zirconia 127Brian Good
Dynamic Neutron Diffraction Study of Thermal Stability andSelf-Recovery in Aluminium Titanate 139I. M. Low and Z. Oo
NANOLAMINATED TERNARY CARBIDES AND NITRIDES
Titanium and Aluminium Based Compounds as a Precursor forSHSofTi2AIN 153L. Chlubny, J. Lis, and M. M. Bucko
Investigations on the Oxidation Behavior of Max-Phase BasedTi2AIC Coatings on 7-TiAI 161Maik Fröhlich
Study of High-Temperature Thermal Stability of Max Phases inVacuum 171I. M. Low, W. K. Pang, S. J. Kennedy, and R. I. Smith
Detection of Amorphous Silica in Oxidized Maxthal Ti3SiC2 at500-1000°C 181W. K. Pang, I. M. Low, J. V. Hanna, and J. P. Palmquist
Author Index 191