Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development / Edition 1 available in Hardcover, eBook
Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development / Edition 1
- ISBN-10:
- 1119406439
- ISBN-13:
- 9781119406433
- Pub. Date:
- 06/12/2017
- Publisher:
- Wiley
Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development / Edition 1
Buy New
$280.95Overview
The Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016) was held in conjunction with HTCMC 9 to address key issues, challenges, and opportunities in a variety of advanced materials and technologies that are critically needed for sustainable societal development.
This Ceramic Transactions volume contains a collection of peer reviewed papers from the 16 below symposia that were submitted from these two conferences
- Design and Development of Advanced Ceramic Fibers, Interfaces, and Interphases in Composites- A Symposium in Honor of Professor Roger Naslain
- Innovative Design, Advanced Processing, and Manufacturing Technologies
- Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases)
- Polymer Derived Ceramics and Composites
- Advanced Thermal and Environmental Barrier Coatings: Processing, Properties, and Applications
- Thermomechanical Behavior and Performance of Composites
- Ceramic Integration and Additive Manufacturing Technologies
- Component Testing and Evaluation of Composites
- CMC Applications in Transportation and Industrial Systems
- Powder Processing Innovation and Technologies for Advanced Materials and Sustainable Development
- Novel, Green, and Strategic Processing and Manufacturing Technologies
- Ceramics for Sustainable Infrastructure: Geopolymers and Sustainable Composites
- Advanced Materials, Technologies, and Devices for Electro-optical and Medical Applications
- Porous Ceramics for Advanced Applications Through Innovative Processing
- Multifunctional Coatings for Sustainable Energy and Environmental Applications
Product Details
ISBN-13: | 9781119406433 |
---|---|
Publisher: | Wiley |
Publication date: | 06/12/2017 |
Series: | Ceramic Transactions Series , #263 |
Pages: | 592 |
Product dimensions: | 6.00(w) x 9.00(h) x 1.25(d) |
About the Author
Mrityunjay Singh
Tatsuki Ohji
Shaoming Dong
Dietmar Koch
Kiyoshi Shimamura
Bernd Clauss
Bernhard Heidenreich
Jun Akedo
Read an Excerpt
Table of Contents
Preface xiDESIGN AND DEVELOPMENT OF ADVANCED CERAMIC FIBERS, INTERFACES, AND INTERPHASES IN COMPOSITES
Physical and Chemical Properties of Silicon Carbide Fibers 3S. Loison and C. Huguet
Heat-Resistant Inorganic Fibers 7Toshihiro Ishikawa and Hiroshi Oda
Synthesis, Properties and Applications of SiC Ultrathin Fibers Via Electrospinning Combined with the Polymer-Derived Ceramics Route 19Ying-de Wang, Bing Wang, and De-chuan Zheng
Novel Oxide Fibers to Reinforce Ceramic and Metal Matrices 27S. T. Mileiko
A Journey in the Field of Ceramic Matrix Composites 39R. Naslain
Effects of the Microstructure, and Degradation Reaction under Heat-Treatment on Mechanical Properties of SiC-Polycrystalline Fiber 55Hiroshi Oda and Toshihiro Ishikawa
INNOVATIVE DESIGN, ADVANCED PROCESSING, AND MANUFACTURING TECHNOLOGIES
Fabrication and Mechanical Properties of ZrC-Modified C/C-SiC Composites 67J. X. Dai, J. J. Sha, Y. F. Zu, J.Q. Shao, S.H. Wang, and M. K. Lei
Manufacture of SiC/ZrSi2 Composite Materials: Assessing Thermal Compatibility between Matrix and Reinforcement 75Olga Coloma Esteban, Mario Caccia, Antonio Camarano, and Javier Narciso
Influence of the Annealing Process Parameters in the Production of New Short-Fibre-Reinforced C/C-SiC Composites 85N. Nier, D. Nestler, H. Gurk, K. Roder, G. Wagner, E. Päßler, L. Kroll, J. Weißhuhn, and St. Spange
Fiber-Matrix Adhesion in CFRC Greenbodies and Its Influence on Microcrack Formation during the Carbonization Process 97S. J. A. Haug, W. M. Mueller, M. G. R. Sause, and S. Horn
Effects of Source Gas Flow Paths on the Matrix Infiltration Behaviors and Mechanical Properties of CVI-Processed SiCf/SiC Composite Tubes 109Ji Yeon Park, Sang Min Jeong, Daejong Kim, Hyeon-Geun Lee, Soon Gil Yoon, and Weon-Ju Kim
Fabrication of Co-Toughened C-SiC Based Composite by Carbon Fibers and SiC Nanofibers 117J. J. Sha, J. X. Dai, J. Q. Shao, Z. F. Zhang, J. Li, Y. F. Zu, S. Flauder, and W. Krenkel
Influencing the Mechanical Properties of Weak Matrix C/C Composites by Means of Microstructural Design 125Andreas Todt, Daisy Nestler, Kristina Roder, Natalia Nier, Bernhard Wielage, and Guntram Wagner
Spark Plasma Sintering of Silicon Carbide Powders with Carbon and Boron as Additives 137Jinhua Yang, Jian Jiao, Ling Wang, and Baowei Li
Comparison of Machining Technologies for CMC Materials using Advanced 3D Surface Analysis 145A. Rösiger and R. Goller
Infiltration of Molten Silicon in a Porous Body of B4C under Microwave Heating 157Mathieu Dutto, Dominique Goeuriot, Sébastien Saunier, Sergio Sao-Joao, Matthieu Lenci, Sylvain Marinel, Shmuel Hayun, and Nachum Frage
Refractory Adhesives for Bonding of Polymer Derived Ceramics 167R. Cook, C. Klein, and H. Armstrong
ADVANCED THERMAL AND ENVIRONMENTAL BARRIER COATINGS
Self-Healing EBC Material for Gas Turbine Applications 175Willy Kunz and Hagen Klemm
Mass Transfer Mechanism in Yb2Si2O7 under Oxygen Potential Gradients at High Temperatures 187S. Kitaoka, T. Matsudaira, M. Wada, N. Kawashima, D. Yokoe, T. Kato, and M. Takata
Magnetron Sputtered Y2SiO5 Environmental Barrier Coatings for SiC/SiC CMCS 197V. Leisner, A. Lange, P. Mechnich, and U. Schulz
THERMOMECHANICAL BEHAVIOR AND PERFORMANCE OF COMPOSITES
Thermal Ablation Performance of Cf-HfB2 Composites with and without a C Matrix Deposited by CVI 213V. Rubio, P. Ramanujam, D. K. Ramachandran, A. D’Angio, and J. G. P. Binner
Experimental Research on Air Permeability of Fiber Reinforced Aerogel 223Y. Ma, F. Zhang, and Q. Xiong
Fatigue Behavior of an Advanced SiC/SiC Ceramic Composite at 1300°C in Air and in Steam 231M. B. Ruggles-Wrenn and M. D. Lee
Strength Recovery and Crack-Filling Behavior of Alumina/TiC Self-Healing Ceramics 243S. Yoshioka and W. Nakao
Hot Gas Stability of Various Ceramic Matrix Composites 253H. Klemm, W. Kunz, T. Wamser, A. Rüdinger, R. Weiß, A. Lauer, C. Wilhelmi, T. Machry, S. Hofmann, and D. Koch
Damage Analysis in 3D Woven SiC/SiC Ceramic Matrix Composite 261B. Legin, Z. Aboura, F. Bouillon, and S. Denneulin
The Wedge-Loaded Double Cantilever Beam Test: A Friction Based Method for Measuring Interlaminar Fracutre Properties in Ceramic Matrix Composites 273Rabih Mansour, Manigandan Kannan, Gregory N. Morscher, Frank Abdi, Cody Godines, and Saber DorMohammadi
Damage Monitoring of MI CMCS with Stress Concentrations Utilizing Acoustic Emission and Electrical Resistance 283Ryan Maxwell and Gregory N. Morscher
Damage Evolution and Fracture in SiCF/SiC Ceramic Matrix Composite Specimens 297C. D. Newton, J. P. Jones, M. R. Bache, Z. Quiney, and A. L. Chamberlain
Damage Characterization of High Velocity Impact in Curved SiC/SiC Composites 311Michael J. Presby, Rabih Mansour, Manigandan Kannan, and Gregory N. Morscher, Frank Abdi, Cody Godines, and Sung Choi
Effect of Vacuum on Microstructure and Mechanical Properties of Silicon Carbide Produced by Reactive Infiltration 323Antonio Camarano, Mario Caccia, and Javier Narciso
High-Temperature Mechanical Properties of Silica Aerogel Composites Reinforced by Mullite Fibers 333Yonggang Jiang, Junzong Feng, Jian Feng, and Chunxiao Shi
Oxidation Resistance Mechanism of TiAlSiCN and TiCrSiCN Compositions made by Plasma Spark Sintering at 1200°C 341Alexander Manulyk
Effects of Binders (Ni-Co) and Ternary Carbide (TaC) on Friction and Wear Behavior of Ti(CN) Based Cermets 353V. Verma and B. V. Manoj Kumar
COMPONENT TESTING AND APPLICATIONS OF COMPOSITES
Application of CMC Materials in Rocket Propulsion 367F. Olufsen and E. Ørbekk
Development of Carbon Fiber Reinforced CMC for Automotive Applications 375K. S. Kim, D. W. Im, Y. H. Choi, S. M. Lee, K. Yoo, N. C. Lee, J. H. Shim, and E. J. Hyun
Octra-Optimized Ceramic for Hypersonic Application with Transpiration Cooling 389Christian Dittert and Marius Kütemeyer
Oxide-Oxide Ceramic Matrix Composites—Enabling Widespread Industry Adoption 401J. Lincoln, B. Jackson, A. Barnes, A. R. Beaber, and L. Visser
Updating Composite Materials Handbook-17 Volume 5—Ceramic Matrix Composites 413J. Douglas Kiser, Kaia E. David, Curtis Davies, Rachael Andrulonis, and Cindy Ashforth
MULTIFUNCTIONAL COATINGS FOR SUSTAINABLE ENERGY AND ENVIRONMENTAL APPLICATIONS
Development of Superfine Nano-Composites Antifouling Coatings for Ship Hulls 427A.S. Khanna, Varun Kasturi, and Pankaj Grover
Effect of Heat Exposure on the Microstructures and Mechanical Properties of 3Al2O3 2SiO2/Si/SiC Coating System 443Ryo Inoue, Kazuma Chikamoto, Yasuo Kogo, and Hideki Kakisawa
Suspension Plasma Spray of Yttria Stabilized Zirconia Coatings 451P. Xu, J. Mostaghimi, T. W. Coyle, and L. Pershin
Thick Aluminum Nitride Coatings by Reactive DC Plasma 465Mohammed Shahien, Motohiro Yamada, and Masahiro Fukumoto
Using an Axial Feeding DC-Plasma Spray Gun for Fabrication of Ceramic Coatings 479Mohammed Shahien and Masato Suzuki
CERAMICS FOR SUSTAINABLE INFRASTRUCTURE
Characterization of Two Calcium Aluminate Cement Pastes 493John F. Zapata, Maryory Gomez, and Henry A. Colorado
Additive Manufacturing of Kaolinite Clay from Colombia 505Carlos F. Revelo and Henry A. Colorado
ADVANCED MATERIALS, TECHNOLOGIES, AND DEVICES FOR ELECTRO-OPTICAL AND MEDICAL APPLICATIONS
Elastic Constants Evaluated by Sound Velocities in Relaxor Single-Crystal Plates Applying to Ultrasonic Probe for Medical Uses 519Toshio Ogawa
High Piezoelectricity in Ceramics Evaluated by Elastic Constants 535Toshio Ogawa
A Thermo-Electro-Mechanical Vibration Analysis of Size-Dependent Functionally Graded Piezoelectric Nanobeams 547A. R. Ashoori, E. Salari, and S. A. Sadough Vanini
Development of Liquid Crystal Display with RGB Laser Backlight 559Y. Fujii, E. Niikura, N. Okimoto, S. Maeda, H. Yasui, and A. Heishi
Development of High Thermal Conductivity Silicon Nitride Substrates 567Dai Kusano, Hideki Hyuga, You Zhou, and Kiyoshi Hirao