Buckling of Ship Structurespresents a comprehensive analysis of the buckling problem of ship structural members.A full analysisof the various types of loadings and stresses imposed on ship plating and primary and secondary structural members is given.The main causes and consequences of the buckling mode of failure of ship structure and the methods commonly used to control buckling failure are clarified. This book contains the main equations required to determine the critical buckling stresses for both ship plating and the primary and secondary stiffening structural members. The critical buckling stresses are given for ship plating subjected to the induced various types of loadings and having the most common boundary conditions encountered in ship structures.
The textbridges the gap existing in most books covering the subject of buckling of ship structures in the classical analytical format, by putting the emphasis on the practical methods required to ensure safety against buckling of ship structural members. It is very useful to ship designers, shipyard engineers, naval architects, international classification societies and also to students studying naval architecture, marine engineering and offshore structures.It is a valuable source for practicing naval architects to quickly check the possibility of buckling of ship structure members without reverting to the complex and costly analysis using advanced FEM software.
|Publisher:||Springer Berlin Heidelberg|
|Product dimensions:||6.10(w) x 9.25(h) x 0.03(d)|
About the Author
His complete CV is available online at: http://www.alex.edu.eg/FILES/CVs/engineering/Marine/MShama-CV.pdf He has recently published a book with Springer: "Torsion and Shear Stresses in Ships".
Table of ContentsScope of the book.- SI units.- Shipbuilding units.- Introduction.- Configuration and geometry of ship structure.- Bending of beams.- Hull girder loading and stresses.- Secondary loading and stresses.- Tertiary and local loading and stresses.- Compounding of stresses induced in ship structural members.- Buckling of beam Columns.- Buckling of ship plating.- Ultimate strength of ship plating.- Types and causes of ship structural failures.- Control of buckling failure of ship structure.