Design, Development, and Applications of Engineering Ceramics and Composites / Edition 1 available in Hardcover
- Pub. Date:
This compilation of proceedings covering the latest scientific and technological developments in design, development, and applications of engineering ceramics and composites provides a useful one-stop resource for understanding the most important issues in design, development, and applications of engineering ceramics and composites. Logically organized and carefully selected articles give insight into design, development, and applications of engineering ceramics and composites and incorporates the latest developments related to design, development, and applications of engineering ceramics and composites including developments in engineering ceramics, advanced ceramic coatings, and geopolymers.
About the Author
Dileep Singh, Argonne National Laboratory.
Table of Contents
DEVELOPMENTS IN ENGINEERING CERAMICS.
Elastic and Vibration Properties of Diamond-Like B-C Materials(J. E. Lowther).
Towards Simulation-Based Predictive Design of Glasses (LipingHuang and John Kieffer).
Dynamic Behavior of Thick Alumina Plates with TunneledInterfaces (F. Orgaz, T. Gómez del Rio, A.Varela and J.F.Fernández).
Deposition Phase Diagrams for Chemical Vapor Deposition ofBCl3-CH4-H2 System (Shanhua Liu, Litong Zhang, Yongsheng Liu,Laifei Cheng, Xiaowei Yin, and Qingfeng Zeng).
The Relation between Optical Properties and Lattice Defects ofTranslucent Aluminum Nitride Ceramics Fabricated by the NovelAnnealing Process (Yukihiro Kanechika, Yuriko Kaito, MasanobuAzuma, and Hiroshi Fukushima).
Thermodynamic Calculations of ZrC-SiC System for Chemical VaporDeposition Applications from SiCl4-ZrCl4-CH4-H2 (Qiaomu Liu, LitongZhang, Yiguang Wang, and Laifei Cheng).
Debindering of Non Oxide Ceramics under Protective Atmosphere(Dieter G. Brunner, Gaby Böhm, Friedrich Raether, and AndreasKlimera).
Softening of Rare Earth Orthophosphates by TransformationPlasticity: Possible Applications to Fiber-Matrix Interphases inCeramic Composites (R. S. Hay, G. Fair, E. E. Boakye, P.Mogilevsky, T. A. Parthasarathy, and J. Davis).
Influence of Fiber Architecture on Impact Resistance of UncoatedSiC/SiC Composites (Ramakrishna T. Bhatt, Laura M. Cosgriff, andDennis S. Fox).
Oxidation Kinetics and Strength versus Scale Thickness forHi-NICALONTM-S SiC Fiber (R. S. Hay, G. Fair, E. Urban, J. Morrow,J. Somerson, and M. Wilson).
Ceramic Matrix Composites Densification by Active FillerImpregnation Followed by a P.I.P. Process (S. Le Ber, M.-A.Dourges, L. Maillé, R. Pailler, and A. Guette).
High Potential of Composites with Carbon Fibers and aSelf-Sealing Ceramic Matrix in Moist Environments under HighPressures at 600°C (L. Quémard, F. Rebillat, F., A.Guette, H. Tawil, and C. Louchet-Pouillerie).
Quantification of Higher SiC Fiber Oxidation Rates in Presenceof B2O3 under Air (F. Rebillat, E. Garitte, and A. Guette).
Overview on the Self-Sealing Process in the SiCf/[Si,C,B]MComposites under Wet Atmosphere at High Temperature (F. Rebillat,X. Martin, E. Garitte, and A. Guette).
NDE for Characterizing Oxidation Damage in ReinforcedCarbon-Carbon (Don J. Roth, Richard W. Rauser, Nathan S. Jacobson,Russell A. Wincheski, James L. Walker, and Laura A. Cosgriff).
Silicon Nitride and Silicon Carbide Components as Enabling Toolsin Avionics, Space and Dispersing Technology (Karl E. Berroth).
a/bSiAlON Based Composites Incorporated with MoSi2for ElectricalApplications (Erhan Ayas, Alpagut Kara, and Ferhat Kara).
Microstructure Characteristics and High-Temperature Performanceof In-Situ Reinforced -SiAlON Ceramics (Yu Zhou, Feng Ye, andChunfeng Liu).
Synthesis Process and Microstructure for Al2O3/TiC/TiFunctionally Gradient Materials (Enrique Rocha-Rangel, DavidHernández-Silva, Elizabeth Refugio-García, José G.Miranda-Hernández, and Eduardo Terrés-Rojas).
Brazing of MIEC Ceramics to High Temperature Metals (S. Dabbarh,E. Pfaff, A. Ziombra, and A. Bezold).
ADVANCED CERAMIC COATINGS.
Thermodynamic Data for Y-O-H(g) from Volatilization Studies (E.Courcot, F. Rebillat, and F. Teyssandier).
From the Volatility of Simple Oxides to that of Mixed Oxides:Thermodynamic and Experimental Approaches (E. Courcot, F. Rebillat,and F. Teyssandier).
Nanolaminated Oxide Ceramic Coatings in the Y2O3-Al2O3 System(Nadine K. Eils, Peter Mechnich, Martin Schmücker, and HartmutKeune).
Thermochemical Stability of Rare Earth Sesquioxides under aMoist Environment at High Temperature (E. Courcot, F. Rebillat, andF. Teyssandier).
Manufacture of P-Type ZNO Thin Film by CO-Sputtering of ZN andLI2CO3 Targets Simultaneously (Yang-Ming Lu, Shu-Yi Tsai, andShin-Yi Wu).
Synthesized Zircon and Zircon Composite from Liquid ChemicalProcess (Yanxia Lu).
ZrO2-Environmental Barrier Coatings for Oxide/Oxide CeramicMatrix Composites Fabricated by Electron-Beam Physical VaporDeposition (Peter Mechnich and Wolfgang Braue).
Development of Geopolymers from Plasma Vitrified Air PollutionControl Residues from Energy from Waste Plants (Ioanna Kourti, D.Amutha Rani, D. Deegan, C. R. Cheeseman, and A. R. Boccaccini).
Synthesis of Zeolite-X from Waste Porcelain Using Alkali Fusion(Takaaki Wajima and Yasuyuki Ikegami).
The Ageing Process of Alkali Activated Metakaolin (C. H.Rüscher, E. Mielcarek, W. Lutz, A. Ritzmann, and W. M.Kriven).
Testing of Geopolymer Mortar Properties for Use as a RepairMaterial (Wanchai Yodsudjai, Prasert Suwanvitaya, WeerapongPikulprayong, and Banjerd Taweesappaiboon).