OSHA Part 1926 "Editorial Note: At 44 FR 8577, February 9, 1979, and corrected at FR 44 20940, April 6, 1979, OSHA reprinted without change the entire text of 29 CFR part 1926 together with certain General Industry Occupational Safety and Health Standards contained in 29 CFR part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry."
This Work; DUVALLS OSHA 1926 Instructors Manual 2014 Edition. Subpart A- General, contains within over 70 pages of a soft cover, fastback binding, easy to read, easy to study textbook printed in black and white and containing over 100 multiple-choice test type questions with answers in college format. This Work is a continuing and ongoing development of my copyrighted lecture series for both industry and classroom.
1926.1 Purpose and scope is address by the use of generally sequential multiple-choice questions paralleling the published text of the source document, the Government Printing Office edition of 1926 Subpart A.
1926.2 Variances from Safety and Health Standards are provided with text sequential multiple-choice questions with answers to aid both the Instructor and the student.
1926.3 Inspections-Right of Entry. It shall be a condition of each contract which is subject to section 107 of the Contract Work Hours and safety Standards Act (Federal Law) that the Secretary of labor or any authorized representative shall have a righr of entry to any site of contract performance for the following purposes:
1926.4 Detail, describe and test upon the Roles of practice for Administrative adjudications for enforcement of safety and health standards. This standard is also provided with easy to read, easy to solve multiple-choice test type questions with answers.
1926.5 OMB control numbers under the Paperwork Reduction Act. This is a simple, easy to read, generally sequential continuation of 1926 Subpart A. Difficult test type questions tend to be appearing with greater frequency at the college and trade level examinations. A substantial number of multiple-choice test type question are provided for Instructors to develop class syllabus and lecture material.
Expect testing on 1926.6 Incorporation by Reference. This area of study is often dismissed as "only reading material". However, in any timed test the knowledge of where the correct answer is to be located if often the key issue at hand. a sizable number of multiple-choice test type questions is provided within this Instructors Manual.
OSHA Part 1926 "Editorial Note: At 44 FR 8577, February 9, 1979, and corrected at FR 44 20940, April 6, 1979, OSHA reprinted without change the entire text of 29 CFR part 1926 together with certain General Industry Occupational Safety and Health Standards contained in 29 CFR part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry."
This Work; DUVALLS OSHA 1926 Instructors Manual 2014 Edition. Subpart A- General, contains within over 70 pages of a soft cover, fastback binding, easy to read, easy to study textbook printed in black and white and containing over 100 multiple-choice test type questions with answers in college format. This Work is a continuing and ongoing development of my copyrighted lecture series for both industry and classroom.
1926.1 Purpose and scope is address by the use of generally sequential multiple-choice questions paralleling the published text of the source document, the Government Printing Office edition of 1926 Subpart A.
1926.2 Variances from Safety and Health Standards are provided with text sequential multiple-choice questions with answers to aid both the Instructor and the student.
1926.3 Inspections-Right of Entry. It shall be a condition of each contract which is subject to section 107 of the Contract Work Hours and safety Standards Act (Federal Law) that the Secretary of labor or any authorized representative shall have a righr of entry to any site of contract performance for the following purposes:
1926.4 Detail, describe and test upon the Roles of practice for Administrative adjudications for enforcement of safety and health standards. This standard is also provided with easy to read, easy to solve multiple-choice test type questions with answers.
1926.5 OMB control numbers under the Paperwork Reduction Act. This is a simple, easy to read, generally sequential continuation of 1926 Subpart A. Difficult test type questions tend to be appearing with greater frequency at the college and trade level examinations. A substantial number of multiple-choice test type question are provided for Instructors to develop class syllabus and lecture material.
Expect testing on 1926.6 Incorporation by Reference. This area of study is often dismissed as "only reading material". However, in any timed test the knowledge of where the correct answer is to be located if often the key issue at hand. a sizable number of multiple-choice test type questions is provided within this Instructors Manual.
DUVALLS OSHA 1926 Instructors Manual 2014 Edition Subpart A General: OSHA 1926 Subpart A General Study Guide
80
DUVALLS OSHA 1926 Instructors Manual 2014 Edition Subpart A General: OSHA 1926 Subpart A General Study Guide
80Paperback
Product Details
| ISBN-13: | 9780989539098 |
|---|---|
| Publisher: | Ficus Tree Publishing LLC |
| Publication date: | 02/10/2014 |
| Pages: | 80 |
| Product dimensions: | 8.50(w) x 11.02(h) x 0.17(d) |