Injection Molding of Thermoplastics Materials - 1
During the years 1987 and 1988 we published a series of articles on the molding of thermoplastics materials in the magazine British Plastics and Rubber (B P & R). These articles were very well received and we also received a large number of requests for reprints. In order to cater for what is obviously a need in the thermoplas­ tics molding industry, we therefore brought the information together and produced it in the form of a book. We can only hope that it serves you well and that you find the information useful. We in turn would like to thank the editor of the magazine B P & R for helping us in this matter. Thanks are also due to our many friends and colleagues throughout the molding industry for their useful help and advice, in particular the company Moldflow (Europe) Limited deserve a special mention as they allowed us to extract information from their extensive data base.
1117753125
Injection Molding of Thermoplastics Materials - 1
During the years 1987 and 1988 we published a series of articles on the molding of thermoplastics materials in the magazine British Plastics and Rubber (B P & R). These articles were very well received and we also received a large number of requests for reprints. In order to cater for what is obviously a need in the thermoplas­ tics molding industry, we therefore brought the information together and produced it in the form of a book. We can only hope that it serves you well and that you find the information useful. We in turn would like to thank the editor of the magazine B P & R for helping us in this matter. Thanks are also due to our many friends and colleagues throughout the molding industry for their useful help and advice, in particular the company Moldflow (Europe) Limited deserve a special mention as they allowed us to extract information from their extensive data base.
54.99 Out Of Stock
Injection Molding of Thermoplastics Materials - 1

Injection Molding of Thermoplastics Materials - 1

by John Goff
Injection Molding of Thermoplastics Materials - 1

Injection Molding of Thermoplastics Materials - 1

by John Goff

Overview

During the years 1987 and 1988 we published a series of articles on the molding of thermoplastics materials in the magazine British Plastics and Rubber (B P & R). These articles were very well received and we also received a large number of requests for reprints. In order to cater for what is obviously a need in the thermoplas­ tics molding industry, we therefore brought the information together and produced it in the form of a book. We can only hope that it serves you well and that you find the information useful. We in turn would like to thank the editor of the magazine B P & R for helping us in this matter. Thanks are also due to our many friends and colleagues throughout the molding industry for their useful help and advice, in particular the company Moldflow (Europe) Limited deserve a special mention as they allowed us to extract information from their extensive data base.

Product Details

ISBN-13: 9780442303068
Publisher: Springer US
Publication date: 07/31/1990
Series: Shape of Space
Edition description: Softcover reprint of the original 1st ed. 1990
Pages: 167
Product dimensions: 5.00(w) x 7.99(h) x (d)

Table of Contents

Plastics and polymers.- Injection molding of thermoplastics.- General purpose polystyrene (GPPS).- High impact polystyrene (HIPS or TPS).- Styrene acrylonitrile (SAN).- Acrylonitrile butadiene styrene (ABS).- Acrylate styrene acrylontrile (ASA or AAS).- Styrene butadiene block copolymer (BDS).- Polymethyl methacrylate (PMMA).- Cellulosics (CA, CAB, CAP).- List of tables.- 1 Some names and abbreviations of plastics and elastomers.- 2a Letters used to modify abbreviations for plastics (ISO and ASTM).- 2b Commonly-used letters used to modify abbreviations for plastics (i.e. in addition to table 2a).- 2c Symbols used for fillers and/or reinforcing materials.- 3 Some abbreviations and trade names of plastics.- 4 Some trade names, abbreviations and suppliers of polymers and polymer compounds.- 5 Water absorption and drying conditions.- 6 Heat contents of some molding materials.- 7 Approximate price of materials relative to a general purpose grade of PS (GPPS = 1.00).- 8 Densities and approximate costs of materials.- 9 Material properties.- 10 Temperature conversion.
From the B&N Reads Blog
Page 1 of

Customer Reviews