Fundamentals of Laser Powder Bed Fusion of Metals

by Igor Yadroitsev (Editor), Ina Yadroitsava (Editor), Anton Du Plessis (Editor), Eric MacDonald (Editor)

Overview

Laser powder bed fusion of metals is a technology that makes use of a laser beam to selectively melt metal powder layer-by-layer in order to fabricate complex geometries in high performance materials. The technology is currently transforming aerospace and biomedical manufacturing and its adoption is widening into other industries as well, including automotive, energy, and traditional manufacturing. With an increase in design freedom brought to bear by additive manufacturing, new opportunities are emerging for designs not possible previously and in material systems that now provide sufficient performance to be qualified in end-use mission-critical applications. After decades of research and development, laser powder bed fusion is now enabling a new era of digitally driven manufacturing. Fundamentals of Laser Powder Bed Fusion of Metals will provide the fundamental principles in a broad range of topics relating to metal laser powder bed fusion. The target audience includes new users, focusing on graduate and undergraduate students; however, this book can also serve as a reference for experienced users as well, including senior researchers and engineers in industry. The current best practices are discussed in detail, as well as the limitations, challenges, and potential research and commercial opportunities moving forward. - Presents laser powder bed fusion fundamentals, as well as their inherent challenges - Provides an up-to-date summary of this advancing technology and its potential - Provides a comprehensive textbook for universities, as well as a reference for industry - Acts as quick-reference guide

Product Details

ISBN-13:	9780128240915
Publisher:	Elsevier Science
Publication date:	05/23/2021
Series:	Additive Manufacturing Materials and Technologies
Sold by:	Barnes & Noble
Format:	eBook
Pages:	676
File size:	257 MB
Note:	This product may take a few minutes to download.

About the Author

Prof. Igor Yadroitsev is a Research Chair in Medical Product Development through Additive Manufacturing at the Central University of Technology launched by the National Research Foundation of South Africa in 2015. He has been involved in additive manufacturing with emphasis on laser powder bed fusion at the Vitebsk Institution of Technical Acoustics (Belarus) since 1995, when this technology was in its infancy. He continued his research in the field at the National School of Engineering (Saint-Étienne, France) and published a book on selective laser melting in 2009. His research interests include applied optics and laser technologies: additive manufacturing, laser powder bed fusion of metals and plastics, laser processing, materials science, and optics. He has authored over 100 articles in the field of laser powder bed fusion.
Dr. Ina Yadroitsava, PhD, has been involved in additive manufacturing since 2007 when she started to work in the Laboratory of Diagnostics and Engineering of Industrial Processes at the National School of Engineering (Saint-Étienne, France). At present, she is working as Senior Researcher at the Department of Mechanical and Mechatronic Engineering, Faculty of Engineering, Built Environment and Information Technology at the Central University of Technology, Free State. In 2019, she was recognized by the South Africa National Research Foundation as an established researcher in such areas as laser metal additive manufacturing, advanced materials and numerical modeling. Her research interests include laser powder bed fusion, material characterization, bio-medical applications, and properties of advanced additively manufactured materials.
Prof. Anton Du Plessis is Associate Professor at Stellenbosch University (South Africa) and Applications Scientist at Object Research Systems (Canada). His research spans X-ray tomography applications, additive manufacturing and engineering materials. He has published over 150 journal papers and is on the editorial board of a number of journals, and acts as deputy editor of Additive Manufacturing Letters and editor in chief of Tomography of Materials and Structures. He holds extraordinary professor positions at Nelson Mandela University and Central University of Technology (South Africa).
Prof. Eric MacDonald, PhD, is a Professor of Mechanical Engineering and the Murchison Chair at the University of Texas at El Paso, as well as deputy editor of the Elsevier journal 'Additive Manufacturing'. Dr. MacDonald received his PhD degree in Electrical Engineering from the University of Texas at Austin and has worked in industry for 12 years at IBM and Motorola, and subsequently co-founded a start-up — Pleiades, Inc., which was acquired by Magma Inc. (San Jose, CA) in 2003. Dr. MacDonald has held faculty fellowships at NASA's Jet Propulsion Laboratory, SPAWAR Navy Research (San Diego), and a State Department Fulbright Fellowship in South America. His research interests include 3D-printed multi-functional applications and advanced process monitoring in additive manufacturing.

Table of Contents

1. Historical backgroundJoseph J. Beaman, University of Texas, Austin, Texas, USA2. Basics of laser powder bed fusionIgor Yadroitsev and Ina Yadroitsava, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa; Anton Du Plessis, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, South Africa3. A step-by-step guide to the L-PBF processIgor Yadroitsev and Ina Yadroitsava, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa;4. Physics and modelingAndrey V. Gusarov, Moscow State University of Technology STANKIN, Moscow, Russia5. Design principlesMartin Leary, David Downing, and Bill Lozanovski, Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria, Australia; Jonathan Harris, nTopology, New York, New York, USA6. Porosity in laser powder bed fusionAnton Du Plessis, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, South Africa 7. Surface roughnessMartin Leary, Avik Sarker, Johnathan Tran, Kate Fox, and David Downing, Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria, Australia; Mahyar Khorasani, School of Engineering, Deakin University, Waurn Ponds, Victoria, Australia; Anton Du Plessis, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, South Africa8. Microstructure of L-PBF alloysPavel Krakhmalev, Department of Engineering and Physics, Karlstad University, Karlstad, Sweden; Nataliya Kazantseva, Institute of Metal Physics UB RAS, Ekaterinburg, Russia9. Residual stress in laser powder bed fusionLameck Mugwagwa, Ina Yadroitsava and Igor Yadroitsev, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa; Nkutwane Washington Makoana, Council for Scientific and Industrial Research, National Laser Centre, Pretoria, South Africa10. Non-destructive testing of parts produced by laser powder bed fusionAnton Du Plessis, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, South Africa; Eric MacDonald, W. M. Keck Center for 3D Innovation, University of Texas at El Paso, El Paso, Texas, USA; Jess M. Waller, NASA-Johnson Space Center White Sands Test Facility, Las Cruces, New Mexico, USA; Filippo Berto, Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway11. Process monitoring of laser powder bed fusionMarco Grasso and Bianca Maria Colosimo, Department of Mechanical Engineering, Polytechnic University of Milan, Milan, Italy; Kevin Slattery, The Barnes Global Advisors, Pittsburgh, Pennsylvania, USA; Eric MacDonald, W. M. Keck Center for 3D Innovation, University of Texas at El Paso, El Paso, Texas, USA12. Post-processingSara Bagherifard and Mario Guagliano, Department of Mechanical Engineering, Polytechnic University of Milan, Milan, Italy13. Structural integrity I: static mechanical propertiesPavel Krakhmalev, Department of Engineering and Physics, Karlstad University, Karlstad, Sweden; Anna Martin Vilardell and Naoki Takata, Department of Materials Process Engineering, Graduate School of Engineering, Nagoya University, Nagoya, Aich, Japan14. Structural integrity II: fatigue propertiesUwe Zerbst and Mauro Madia, Federal Institute for Materials Research and Testing (BAM), Berlin, Germany15. Structural integrity III: energy-based fatigue prediction for complex partsSeyed Mohammad Javad Razavi and Filippo Berto, Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway; Anton Du Plessis, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, South Africa16. Lattice structures made by laser powder bed fusionMohammad J. Mirzaali, Jie Zhou, and Amir A.

What People are Saying About This

From the Publisher

A comprehensive overview of laser powder bed fusion of metals, from fundamental understanding of processes, to current challenges and applications

Editorial Reviews

"I just finished reading the latest book entitled Fundamentals of Laser Powder Bed Fusion of Metals published by Elsevier which I found to be of exceptional quality. The topics are coherently and overarchingly discussed right from the basics of laser powder bed fusion to its physics and modelling, porosity defects, residual stresses, non-destructive characterisation, process monitoring, lattice materials, metamaterials, mechanical properties, novel material developments and future trends. Altogether there are 24 chapters, each authored by respective leaders in the field totalling 58 authors from around the globe. The book concludes with an interesting case study that puts some of the key aspects into perspective. Overall, this is the most comprehensive book regarding laser powdered bed fusion of metals to date. As such it is a recommended reading for undergraduates, postgraduates, researchers, and advanced practitioners in the field of metal additive manufacturing. The book is suitable both for guided learning and quick reference." —Dr Arun. Arjunan

From the Publisher