Advancement of Optical Methods in Experimental Mechanics, Volume 3: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics

by Helena Jin (Editor), Cesar Sciammarella (Editor), Sanichiro Yoshida (Editor), Luciano Lamberti (Editor)

Overview

Advancement of Optical Methods in Experimental Mechanics, Volume 3: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, the third volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas:
Advanced optical methods for frontier applications
Advanced optical interferometry
Optical measurement systems using polarized light
Optical methods for advanced manufacturing
Digital image correlation
Optical methods at the micro/nano-scale
Three-dimensional imaging and volumetric correlation
Imaging methods for thermomechanics applications
Opto-acoustical methods in experimental mechanics
Optical measurements in challenging environments
Optical methods for inverse problems
Advances in optical methods.

Product Details

ISBN-13:	9781040601594
Publisher:	River Publishers
Publication date:	08/07/2025
Sold by:	Barnes & Noble
Format:	eBook
Pages:	414
File size:	59 MB
Note:	This product may take a few minutes to download.

About the Author

Helena Jin, Sandia National Laboratories, Livermore, USA. Cesar Sciammarella, Illinois Institute of Technology, Chicago, USA. Sanichiro Yoshida, Southeastern Louisiana University, Hammond, USA. Luciano Lamberti, Bari, Italy.

Table of Contents

1 The Kinematics of Crystalline Arrays at the Subnanometric Level 2 Comprehensive Theory of Deformation 3 Topography of Rough Dielectric Surfaces Utilizing Evanescent Illumination 4 Strain Assessment in Cracked Sheet Metals by Optical Grid Method 5 A Preliminary Investigation on the Mechanical Behavior of Umbilical Cord With Moire´ Techniques 6 Study on the Visco-Hyperelastic Behavior of the Zona Pellucida 7 Data Processing Techniques to Analyze Large 3-D Deformations of Cardiac Cycles 8 Bi-Directional Displacement Measurement by Speckle Interferometry Immune to Random Vibration 9 Design of a Double-Illumination ESPI System for the Measurement of Very Slow Motions 10 Multiplexed Holography for Single-Shot Three-Dimensional Shape and Displacement Measurements 11 Observation of Grain-Size Effect in Serration of Aluminum Alloy 12 Opto-Acoustic Technique to Investigate Interface of Thin-Film Systems 13 Analysis of Fatigue of Metals by Electronic Speckle Pattern Interferometry 14 Simultaneous Application of Acoustic and Optical Techniques to Nondestructive Evaluation 15 Stress Analysis on Welded Specimen with Multiple Methods 16 Sound Attenuation for Dogs Barking Using of Transfer Function Method 17 On the Use of Regularized DVC to Analyze Strain Localization 18 Determination of Surface Bi-Axial Stresses Using Raman Spectroscopy 19 Visualization and Quantification of Quasi-Static and Dynamic Surface Slopes Using a Reflection-Mode Digital Gradient Sensor 20 Analysis of Linear Anisotropic Parameters by Using Hybrid Model in Mueller Optical Coherence Tomography 21 Characterization of Time-Dependent Mechanical Behaviors of Dental Composites by DIC 22 Deformation Distribution Measurement from Oblique Direction Using Sampling Moire Method 23 Automatic Stress Measurement by Integrating Photoelasticity and Spectrometry 24 Observation of Fiber-Matrix Interfacial Stresses Using Phase-Stepping Photoelasticity 25 Stabilizing Heteroscedastic Noise with the Generalized Anscombe Transform: Application to Accurate Prediction of the Resolution in Displacement and Strain Maps Obtained with the Grid Method 26 Experimental Evaluation of the Warping Deformation in Thin-Walled Open Section Profiles 27 In Situ Study of Plastic Flow at Sliding Metal Surfaces 28 Stiffness Investigation of Synthetic Flapping Wings for Hovering Flight 29 A Generic, Time-Resolved, Integrated Digital Image Correlation, Identification Approach 30 Multiscale FE-Based DIC for Enhanced Measurements and Constitutive Parameter Identification 31 Uncertainties of Digital Image Correlation Near Strain Localizations 32 Pre-qualifying DIC Performance Based on Image MTF Correlation Coefficient 33 Analysis of E-Beam Microlithography and SEM Imaging Distortions 34 Displacement Measurements Using CAD-Based Stereo-DIC 35 Single-Camera-Based 3D DIC for Fast-Speed Measurement 36 Three-Dimensional Digital Image Correlation Using a Single Color-Camera 37 Multi-Camera DIC Offers New Dimensions in Material Testing 38 Using Sampling Moire´ to Extract Displacement Information from X-Ray Images of Molten Salt Batteries 39 High-Speed Digital Holography for Transient Response of the Human Tympanic Membrane 40 Displacement and Strain Measurement with Multiple Imaging Head Using PSDHI 41 Simultaneous ESPI Measurements Using Multiple Wavelengths and a Color Camera 42 Some Practical Considerations in High-Speed 3D Shape and Deformation Measurement Using Single-Shot Fringe Projection Technique 43 Fast-Speed, High-Accuracy and Real-Time 3D Imaging with Fringe Projection Technique 44 DIC Strain Analysis of Pipeline Test Specimens Containing Metal Loss 45 Experimental Inference of Inter-Particle Forces in Granular Systems Using Digital Image Correlation 46 High Pressure Burst Testing of SiCf-SiCm Composite Nuclear Fuel Cladding 47 Low Cost Digital Image Correlation (DIC) for Monitoring Components Undergoing Fatigue Loading 48 Tensile Response and the Associated Post: Yield Heating of Polycarbonate 49 Passive 3D Face Reconstruction with 3D Digital Image Correlation 50 On the Meso-Macro Scale Deformation of Low Carbon Steel 51 Feasibility of Non-Contacting Measurement of Wind-Induced Full-Field Displacements on Asphalt Shingles.