Fracture, Fatigue, Failure and Damage Evolution, Volume 6: Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics

by Jay Carroll (Editor), Shuman Xia (Editor), Allison M. Beese (Editor), Ryan B. Berke (Editor)

Overview

Fracture, Fatigue, Failure and Damage Evolution, Volume 6 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including:
Novel Experimental Methods

Extreme Environments

Interfacial Fracture

Integration of Models & Experiments

Mechanics of Energy & Energetic Materials

Integration of Models & Experiments

In Situ Techniques for Fatigue & Fracture

Microscale & Microstructural Effects on Mechanical Behavior.

Product Details

ISBN-13:	9781040602089
Publisher:	River Publishers
Publication date:	08/07/2025
Sold by:	Barnes & Noble
Format:	eBook
Pages:	112
File size:	16 MB
Note:	This product may take a few minutes to download.

About the Author

Jay Carroll, Sandia National Lab, MS 0889, Albuquerque, USA. Shuman Xia, Mechanical Engineering Georgia Tech, MRDC 4103, Georgia Institute of Technology, Atlanta, USA. Allison M. Beese, Pennsylvania State University, State College, USA. Ryan B. Berke, Department of Mechanical and Aerospace Engineering, Utah State University, Logan, USA. Garrett J. Pataky, Fluor Daniel Innovation Bldg 245, Clemson University, Clemson, USA.

Table of Contents

Preface 1 In Situ Strain Measurement in Solid-State Li-Ion Batteries 2 Crack-Tip Plastic Zone Size and Shape via DIC 3 Investigating Dynamic Fracture Parameters for Al7075-T651 Using Modified Hopkinson Pressure Bar (MHPB) 4 Failure Testing Under In-Plane Biaxial Tension and Out-of-Plane Compression 5 An Experimental Method to Induce and Measure Crack Propagation in Brittle Polymers with Heterogeneities 6 The Sandia Fracture Challenge: How Ductile Failure Predictions Fare 7 Characterization and Modeling of Low Modulus Composite Patched Aluminum Center Crack Tension Specimen Using DIC Surface Displacements 8 Influence of the Temperature on Lifetime Reinforcement of a Filled NR 9 In-situ Crack Tip Stress Measurement at High Temperature in IN-617 Using Combined Nano-Indentation and Nano-Mechanical Raman Spectroscopy 10 Modification of Benthem Solution for Mode I Fracture of Cylinder with Spiral Crack Subjected to Torsion 11 An Investigation of Stress Concentration, Crack Nucleation, and Fatigue Life of Thin Low Porosity Metallic Auxetic Structures 12 Cohesive Zone Smoothing of Bending Stiffness Heterogeneities in Tape Peeling Experiments 13 Experimental Study on Fatigue Performance of Steel-Concrete Composite Girders 14 Numerical Modeling of Charpy Impact Test to Determine the Fracture Characteristics of Aluminium Alloy 6061 15 A Progression on the Determination of Dynamic Fracture Initiation Toughness Using Spiral Crack 16 Damage Evolution and Local Strain Redistribution in Composite Laminate with Various Fiber Arrangements 17 Combined Modeling and Experimental Approach to Improve Mechanical Impact Survivability of GaN Power FET 18 Mechanics of Materials and Fracture for High School Students.