Fracture, Fatigue, Failure and Damage Evolution, Volume 7: Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics

by Jay Carroll (Editor), Shuman Xia (Editor), Alison M. Beese (Editor), Ryan B. Berke (Editor)

Overview

Fracture, Fatigue, Failure and Damage Evolution, Volume 7 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of nine from the Conference, brings together contributions to this important area of research and engineering.

Session organizers include: Jay Carroll, Shuman Xia, Allison Beese, Ryan Berke, Garrett Pataky, Samantha Daly, Kavan Hazeli, Antonios Kontsos, Omer Ozgur Capraz, Scott Grutzik, Onome Scott-Emaukpor

The collection presents early findings and case studies on a wide range of areas, including:

Mechanics of Energy & Energetic Materials
Vibration Effects in Fracture & Fatigue
Fracture & Fatigue of Additively Manufactured Materials
In Situ Techniques for Fatigue & Fracture
Microscale & Microstructural Effects on Mechanical Behavior
Fracture & Fatigue of Composites
Integration & Validation of Models with Experiments
Fracture & Fatigue in Extreme Environments
Novel Experimental Methods for Fatigue and Fracture
Fracture of Brittle & Ductile Materials
Interfacial Fracture.

Product Details

ISBN-13:	9781040602812
Publisher:	River Publishers
Publication date:	08/07/2025
Sold by:	Barnes & Noble
Format:	eBook
Pages:	123
File size:	15 MB
Note:	This product may take a few minutes to download.

About the Author

Jay Carroll, Sandia National Laboratories, Albuquerque, USA. Shuman Xia, School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, USA. Alison M. Beese, Pennsylvania State University, State College, USA. Ryan B. Berke, Department of Mechanical&Aerospace Engineering, Utah State University, Logan, USA. Garrett J Pataky, Department of Mechanical Engineering, Clemson University, Clemson, USA.

Table of Contents

1 Interface Mechanical Strength and Elastic Constants Calculations via Nano Impact and Nanomechanical Raman Spectroscopy 2 Effect of Strain Rate and Interface Chemistry on Failure in Energetic Materials 3 Characterization of Crack Tip Plasticity in IN-617 Using Indentation and Nano-Mechanical Raman Spectroscopy Yang Zhang and Vikas Tomar 4 The Two-Way Relationship Between Residual Stress and Fatigue/Fracture 5 Designing Brittle Fracture Specimens to Investigate Environmentally Assisted Crack Growth 6 Flexible Energy Harvesting/Storage Structures for Flapping Wing Air Vehicles 7 The Influence of Formulation Variation and Thermal Boundary Conditions on the Near-Resonant Thermomechanics of Mock Explosives 8 Detecting Fatigue Crack Closure and Crack Growth Delays After an Overload Using DIC Measurements 9 In-Situ Observation of Damage Evolution in Quasi-Isotropic CFRP Laminates 10 Contamination-Induced Degradation/Enhancement of Interfacial Toughness and Strength in Polymer-Matrix Composite Interfaces 11 Direct and Simultaneous Extraction of Mixed-Mode Traction-Separation Relations 12 Damage Evolution in 304L Stainless Steel Partial Penetration Laser Welds 13 Cross-Axis Coupling and Phase Angle Effects Due to Multiaxial Vibration 14 Behavior of Steel-Concrete Composite Beams Under Fatigue Loads 15 Studying the Fracture of Tropical Wood Species with the Grid Method 16 Generalization of Integral Parameters to Fatigue Loading in Room Temperature 17 Fracture Behavior of Unidirectional Composites Analyzed by Acoustic Emissions Technique.