Pub. Date:
Taylor & Francis
Analysis and Design of Marine Structures V / Edition 1

Analysis and Design of Marine Structures V / Edition 1

by C. Guedes Soares, R.A. Shenoi

Other Format

Current price is , Original price is $259.0. You

Temporarily Out of Stock Online

Please check back later for updated availability.

Item is available through our marketplace sellers.

Product Details

ISBN-13: 9781138027893
Publisher: Taylor & Francis
Publication date: 04/08/2015
Pages: 814
Product dimensions: 6.75(w) x 9.75(h) x (d)

Table of Contents


Wave loads and responses

Experimental investigation of the influence of hull damage on ship responses in waves
S.S. Bennett & A.B. Phillips

Unstructured MEL scheme for 3D body nonlinear ship hydrodynamics
A.C. Chapchap & P. Temarel

An initial estimation of DP requirements for a non-moored operational FPSO
G.E. Hearn & G.C. Bratu

CFD based computation of bow impact loads for buckling assessment
J. Oberhagemann, M. Radon, H. von Selle & D.K. Lee

Comparison of two practical methods for seakeeping assessment of damaged ships
J. Parunov, M. Ćorak & I. Gledić

Smoothed Particle Hydrodynamics (SPH) method for modelling 2-dimensional free surface hydrodynamics
M.Z. Ramli, P. Temarel & M. Tan

Wave-induced responses of a bulk carrier in heading and following seas
X.L. Wang, R.M. Liu & J.J. Hu

Numerical simulation of the dynamics of a large moored tanker
S. Zhang, Q. Jin, J. Xin, T. Li, P. Temarel & W. Geraint Price


Slamming impact loads on high-speed craft sections using two-dimensional modelling
J. Camilleri, D.J. Taunton & P. Temarel

Non-linear hydroelastic and fatigue analyses for a very large bulk carrier
B. Cristea, C.I. Mocanu & L. Domnisoru

Hydroelastic analysis of a flexible barge in regular waves using coupled CFD-FEM modelling
P. Lakshmynarayanana, P. Temarel & Z. Chen


Simplified method for natural frequency analysis of stiffened panel 1
E. Avi, A. Laakso, J. Romanoff & I. Lillemäe

Investigation of vibrational power flow patterns in damaged plate structures for damage localisation
P. Boonpratpai & Y.P. Xiong

Influence of the sea action on the measured vibration levels in the comfort assessment of mega yachts
E. Brocco, L. Moro, P.N. Mendoza Vassallo, M. Biot, D. Boote, T. Pais & E. Camporese

A computational framework for underwater shock response of marine structures 131
C. Diyaroglu, D. De Meo & E. Oterkus

Liquid sloshing analysis for independent tank with elastic supports
W. Liu, H.X. Xue & W.Y. Tang

Numerical simulation of the dynamic behaviour of resilient mounts for marine diesel engines
L. Moro, E. Brocco, P.N. Mendoza Vassallo, M. Biot & H. Le Sourne

Characteristic of low and middle frequency underwater noise of a catamaran
F.Z. Pang, Y.Z. Xue, D. Tang, S. Li & Y.P. Xiong

Simulation of the vibration characteristics of a propulsion system excited by hull deformations
Z. Tian, X.P. Yan, C. Zhang & Y.P. Xiong

A new approach to analyze the underwater vibration of double layer ribbed cylinder
F. Wang, Y. Xiong, Z. Weng & L. He

Impact resistance assessment of shipboard equipment considering spectrum dip effect
Y.J. Yang, M. Yu, X.B. Li & L.H. Feng

Natural frequencies of eccentric cylindrical shells filled with pressurized fluid
G.J. Zhang, T.Y. Li, X. Zhu, L. Xiong & Y.P. Xiong

Magnetorheological elastomer materials and structures with vibration energy control for marine application
G. Zhu, Y.P. Xiong, S. Daley & R.A. Shenoi


Corrosion fatigue crack growth in offshore wind monopile steel HAZ material
O. Adedipe, F. Brennan & A. Kolios

Improvements in fatigue strength assessment of marine propellers
C. Bertoglio, S. Gaggero, C.M. Rizzo, M. Viviani, C. Vaccaro & F. Conti

Fatigue crack growth performance of laser hybrid and arc welds of AH36 naval steels
E.V. Chatzidouros, T. Tsiourva, D.I. Pantelis & A. Lopez

Overload and dwell time effects on crack growth property of high strength titanium alloy TC4 ELI used in submersibles
F. Wang, W.C. Cui, Y.Y. Wang & Y.S. Shen

Consideration of stress gradient effects for complex structures in local fatigue approaches
C. Fischer & W. Fricke

Fatigue assessment of joints at bulb profiles by local approaches
C. Fischer, W. Fricke & C.M. Rizzo

Fatigue life improvement of laser-welded web-core steel sandwich panels using filling materials
D. Frank, J. Romanoff & H. Remes

A full-scale fatigue test on longitudinal-through-bulkhead detail by using equivalent angle bar
Q. Yi, J. Yue, Y. Liu, W. Tang & Z. He

Springing effect on the fatigue life of an 8000TEU container ship
P.-K. Liao, Y.-J. Lee, H.-J. Lin, S.-C. Tsai, H.-L. Chien, B.C. Chang & G.M. Luo

A fracture mechanics based approach for the analysis of crack growth at weld joints of ship structures
B.Q. Lou, S. Zhang, J. Tong, S. Wong, F. Cheng & S. Hirdaris

A study on the effect of hull girder vibration on the fatigue strength
M. Oka, T. Niwa & K. Takagi

Fatigue strength of welded extra high-strength and thin steel plates
H. Remes, M. Peltonen, T. Seppänen, A. Kukkonen, S. Liinalampi, I. Lillemäe, P. Lehto, H. Hänninen, J. Romanoff & S. Nummela

Investigation of weld root fatigue of single-sided welded T-joints
W. Sundermeyer, W. Fricke & H. Paetzold

Fatigue data of High-Frequency Mechanical Impact (HFMI) improved welded joints subjected to overloads
H.C. Yildirim & G. Marquis

Application of wave models to fatigue assessment of offshore floating structures
T. Zou, M.L. Kaminski & X.L. Jiang

Structural analysis

A simplified FE model for the non-linear analysis of container stacks subject to inertial loads due to ship motions
E. Brocco, L. Moro & M. Biot

Structural Health Monitoring of marine structures by using inverse Finite Element Method
A. Kefal & E. Oterkus

Method for estimating soft clay type seabed embedment by pipeline movement
D.K. Kim, M.S. Liew, S.Y. Yu, K.S. Park & H.S. Choi

Assumptions and reality: Stress states in uniaxial tension test
M. Kõrgesaar

Dynamic analysis of ring stiffened conical-cylindrical shell combinations with general coupling and boundary conditions
X.L. Ma, G.Y. Jin, Y.P. Xiong & Z.G. Liu

The determination of ice-induced loads on the ship hull from shear strain measurements
M. Suominen, J. Romanoff, H. Remes & P. Kujala

A study of cross deck effects on warping stresses in large container ships
R. Villavicencio, S. Zhang & J. Tong

Analysis on influence of spherical bulkhead reinforcement on stability
S. Yuan, X.H. Miao & B. Luo

Hull ultimate strength

Structural capacity of an aging box girder accounting for the presence of a dent
S. Saad-Eldeen, Y. Garbatov & C. Guedes Soares

Strength analysis of ship shaped structures subjected to asymmetrical bending moment
M. Tekgoz, Y. Garbatov & C. Guedes Soares

A study on the effect of lateral loads on the hull girder ultimate strength of bulk carriers
K. Toh & T. Yoshikawa

Model test on the ultimate longitudinal strength of a damaged box girder
Y. Yamada & T. Takami

Ultimate strength

Influence of shear-induced secondary bending on buckling of web-core sandwich panels
J. Jelovica & J. Romanoff

Influence of lateral pressure on load-shortening behavior of stiffened panels under combined loads
L. Jiang & S. Zhang

Elastic shear buckling capacity of the longitudinally stiffened flat panels
S. Kitarovic, J. Andric & K. Piric

Strength of aluminium alloy ship plating under combined shear and compression/tension
M.S. Syrigou, S.D. Benson & R.S. Dow

Effects of initial imperfection shapes on plate ultimate strength under combined loads
S. Zhang & L. Jiang

Damaged structures

Statistics of still water bending moment of damaged ships
B. Bužančić Primorac, M. Ćorak & J. Parunov

Multiphysics modelling of Stress Corrosion Cracking by using peridynamics
D. De Meo, C. Diyaroglu, N. Zhu, E. Oterkus & M. Amir Siddiq

Progressive collapse of intact and damaged stiffened panels
A. Leelachai, S.D. Benson & R.S. Dow

Comparative analysis of HCSR based on ultimate strength of intact ships and residual strength in damaged condition
W. Lei, W.Z. Quan & H.J. Hao

Residual strength of a severely damaged box-girder with non-uniform and inter-crystalline corrosion
S. Saad-Eldeen, Y. Garbatov & C. Guedes Soares

Structural design

Investigation into the implications of increasing minimum manhole access requirements in marine structures
P. Eames, H. Hickson & J.M. Underwood

Structural design and optimisation of an aluminium trimaran
D. Fuentes, M. Salas, G. Tampier & C. Troncoso

Efficient optimization framework for robust and reliable structural design considering interval uncertainty
Y. Liu & M.D. Collette

Multi-objective optimization of lightweight modular sandwich panels
A. Milat, T. Tomac, D. Frank, Đ. Dundara, O. Kuzmanović & V. Radolović

Fabrication technology

Numerical investigation of welding induced distortion of a stiffened plate structure
Z. Chen, Z.C. Chen & R.A. Shenoi

Reduction in weld induced distortions of butt welded plates subjected to preventive measures
M. Hashemzadeh, Y. Garbatov & C. Guedes Soares

Buckling mitigation of stiffened panels through thermomechanical tensioning
N.R. Mandal, S. Kumar, D. Podder, A. Gadagi & T. Mathew

Numerical analysis of residual stress in butt-welded High Tensile Strength steel structures
Y.X. Wan, Y.P. Xiong & L.B. Li

Composite structures

Comparison of effective breadth definitions large composite top-hat stiffened grillages
E. Arnaud, A.J. Sobey & J.I.R. Blake

Static and fatigue tests of hybrid composite-to-steel butt joints
E.A. Kotsidis, P. Yarza, N.G. Tsouvalis, R. de la Mano & E. Rodriguez-Senín

Mechanical characterization of yachts and pleasure crafts fillers
G. Nebbia, C.M. Rizzo, M. Gaiotti & A. Caleo

Composite riser design and development—A review
D.-C. Pham, S. Narayanaswamy, X. Qian, W. Zhang, A.J. Sobey, M. Achintha & R.A. Shenoi

Steel or composite car deck structure—a comparison analysis of weight, strength and cost
J.W. Ringsberg


Numerical crashworthiness analysis of an offshore wind turbine monopile impacted by a ship
A. Bela, L. Buldgen, Ph. Rigo & H. Le Sourne

Development of a failure strain surface in average stress triaxiality and average lode angle domains of a low temperature high strength steel
J. Choung, S.J. Park & G.T. Tayyar

Structural response of ship bottom floor plating during shoal grounding
Z.G. Gao & Z.Q. Hu

Non-linear finite element analysis of crashworthy shields of offshore wind turbine supporting structures
B. Liu, Y. Garbatov & C. Guedes Soares

Modelling of structural damage and environmental consequences of tanker grounding
K. Tabri, R. Aps, A. Mazaheri, M. Heinvee, A. Jönsson & M. Fetissov

Renewable energies devices

A study on the short and long-term analysis of nonlinear hydrodynamic force on an Energy Saving Device
D.B. Lee, H.J. Kim & B.-S. Jang

Numerical simulation of multi-body wave point-absorber
L. Li, M. Tan & J.I.R. Blake

Optimized topology design for substructure of 10MW grade floating type Wave-Wind Hybrid Power Generation System
C.Y. Song, H.C. Song, C.S. Shim, J.H. Park & Y.Y. Park

Fatigue reliability of an offshore wind turbine supporting structure accounting for inspection and repair
B. Yeter, Y. Garbatov & C. Guedes Soares

Uncertainty and reliability

System reliability analysis of a ship deck structure for buckling collapse and corrosion limit states
B. Gaspar & C. Guedes Soares

Effect of the aspect ratio on the ultimate compressive strength of plate elements with non-uniform corrosion
B. Gaspar, A.P. Teixeira & C. Guedes Soares

Uncertainty analysis of the energy absorbed in beam and plate elements under impulsive loading
B. Liu & C. Guedes Soares

Effects of input uncertainty on composite patch disbond under impact loading
S.C. TerMaath & D.C. Hart

Experimental study on the rear bearing load characteristics considering uncertainty external loading
S.D. Zhang, Z.L. Liu, X.P. Yan, Y. Jin & B. Qin

Author index

Customer Reviews

Most Helpful Customer Reviews

See All Customer Reviews